News Center

Home page

Peak Report

News reports

I'm on the spike for thirty years

Release time:

2020-08-14

I stepped onto the stage as a representative of the old employee who served the peak for more than

years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.

I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.

Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.

In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001

1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.

2004

5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.

2015

1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak

years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)

More information

Create a safe environment to meet the G20

The G20 summit will be held in Hangzhou from September 4 to 5. On August 8, the safety committee of the group company will hold a meeting to make arrangements and put forward requirements for the key work of safety and environmental protection from now to the summit. At the meeting, Chen Tianci, director of the safety management office of the group company, conveyed the requirements of the provincial, municipal and district governments during the G20 summit. Combined with the specific situation and work characteristics of each enterprise, he put forward requirements for environmental protection, safety, public security and other work. In terms of environmental protection management, we must strictly implement the company's environmental protection system, focusing on the management and disposal of solid waste, and the emission control of sewage and dust; at present, in the high temperature season, we must focus on strengthening fire safety management, especially warehousing and hazardous chemical business units., We must strictly do a good job in daily safety inspections; all enterprises must promptly convey the relevant spirit of their superiors to each employee, strengthen ideological and political work, and create a good and harmonious corporate atmosphere. Xiang Chongping, deputy general manager of the group company, supplemented the territorial management of related matters of various enterprises, properly handling internal contradictions, and strengthening network security management. Yu Jianhong, general manager of the group company, stressed at the meeting that safety and environmental protection work should be talked about and grasped every day, and should not be relaxed at any time. Safety accidents seem to be accidental, but in fact they are inevitable, and their roots lie in the usual violations and carelessness. Therefore, all enterprises should seriously organize their employees to carry out self-examination and self-correction, effectively improve their safety awareness, and find out and rectify the small problems and hidden dangers that have been ignored in their work in the past. At the same time, it is necessary to do a good job in the safety zone of operation and the protection of related facilities, through advanced control systems, safe facilities and equipment, standardized

2020

07-31

Create a safe environment to meet the G20

2020

07-30

Technological Innovation Brings Enterprises to the International Stage

Editor's note: As a 17-year-old senior enterprise in the extract industry, Tianjin Jianfeng Natural Products Research and Development Company has devoted more time, energy and funds to R & D and innovation while doing a good job in business operations. It has always been an important direction for them to achieve self breakthrough by turning waste into treasure and technological innovation. Therefore, it has achieved the improvement of market popularity at home and abroad and the rapid growth of sales volume, and has become a key science and technology enterprise in Tianjin Binhai New Area. On July 9, the "Bohai Morning Post" "TEDA Technology Little Giant Tour" column published an exclusive interview, describing the growth experience and a series of achievements of Tianjin Jianfeng Natural Products Company. This article will be reproduced in this newspaper for readers. "Little grape seed" grows into a little giant of science and technology to solve the problem of pesticide residues in plant extracts. Technological innovation has enabled the enterprise to step onto the international stage based on independent innovation and development. Starting from the initial grape seed extraction process, it has gradually grown into the largest professional fruit extract manufacturer in China with dozens of plant extract products conforming to international strict standards and an annual productivity of 2000 tons, tianjin Jianfeng Natural Products Research and Development Co., Ltd. (hereinafter referred to as "Tianjin Jianfeng") has gone through a decade of rapid development. As a supplier of raw materials in health food, beverages, cosmetics, baked goods and many other fields, the concept of "truth and safety" advocated by Tianjin Jianfeng has run through all aspects of R & D and production. Its products are not only well-known in China, but also exported to Europe and the United States. Become a new business card of TEDA. Technological innovation is in line with international standards. "In people's lives, the beverages they drink, the health foods they eat, and the cosmetics they use will contain plant extracts.

2020

07-31

Create a safe environment to meet the G20

2020

07-31

The company requires each business segment to formulate medium-and long-term business plans.

According to our newspaper, "if an enterprise wants to develop in the long run, first of all, managers should have a long-term vision." On July 24, when general manager Yu Jianhong deployed the work for the second half of the year at the semi-annual meeting of the group company, he specifically asked all enterprises to formulate specific medium-and long-term business development plans for the next three to five years according to the industrial development trend and the group development strategy. Before making arrangements for the specific key work in the second half of the year, Yu Jianhong emphatically put forward the requirements for each business sector to formulate a business strategy plan for 2016-2018 according to the industry development trend and the group's development strategy. Yu Jianhong pointed out that the current group company's strategic decision-making and strategic development capabilities and efficiency still need to be improved. The publicity, understanding and implementation of the group's development strategy by various companies are not in place. The lack of medium and long-term business planning in each business sector restricts the business of the company. Development, cultivation of core products and profitability, construction of product brands, improvement of business scale and comprehensive strength. Last year, the group company asked the international trading company to formulate three-year work objectives and sign a three-year economic responsibility system with the company's management team. The actual effect shows that this has made the management team's management ideas clearer and more scientific and rational in terms of target setting, work arrangement and business development. For this reason, the group company put forward the requirements for the formulation of medium and long-term development plans for each business sector at this meeting. According to the industry characteristics of each business segment, market environment and other specific circumstances, the company makes requirements for the key content of the development plan of each business segment. For example, the pharmaceutical sector focuses on sales growth targets for key profitable products, product development and

2020

07-31

The company requires each business segment to formulate medium-and long-term business plans.

2020

07-31

< 1...57 58 59...61 > 跳转到页