News Center

Home page

Peak Report

News reports

I'm on the spike for thirty years

Release time:

2020-08-14

I stepped onto the stage as a representative of the old employee who served the peak for more than

years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.

I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.

Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.

In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001

1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.

2004

5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.

2015

1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak

years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)

More information

Jianfeng International Trade Selected as Pilot Enterprise of Non-car Carrier Logistics

In August, Jianfeng International Trading Company successfully passed the evaluation of traffic management departments and expert groups in Zhejiang Province and Jinhua City, and was successfully selected as a pilot enterprise of car-free carrier logistics in Zhejiang Province in 2019. "Car-free transportation" is a new format in the logistics industry brought about by the widespread application of information Internet technology. The "car-free carrier" signs a transportation contract with the shipper as a carrier, assumes the responsibilities and obligations of the carrier, and entrusts the actual carrier to complete the transportation task. Road freight operators. Compared with the traditional concept of logistics mode, car free carrier has the characteristics of strong resource integration ability, wide brand effect and obvious network effect. It is of great significance to promote the intensive integration of resources and the standardized development of the freight market by using Internet means and organizational mode innovation, which is of great significance to promote the transformation and upgrading of the logistics freight industry and improve the quality and efficiency. The planning and construction objectives of the "car-free carrier" platform envisaged by Jianfeng International Trade are: based on the influence of the peak region and the advantages of integrating qualification resources, changing the competition mode, expanding the market coverage and profit pattern, and realizing the transformation and upgrading of traditional businesses, I .e. realizing the "five" operations of PDCA closed-loop operation of supply chain system and marketing marketization, coordination of transportation capacity, customization of services, platform datalization and de-intermediation, we will continue to promote the regional logistics market from low, small, scattered and empty to resource sharing, value sharing and win-win cooperation, and finally build an integrated supply chain service system of "logistics Internet post-market finance. The relevant person in charge of the peak international trade said that the "car-free carrier" pilot qualification, for the peak international trade to change the business model, improve the quality of service.

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

On August 2, Zhengzhou Commodity Exchange issued "on the establishment of a new designated cotton yarn delivery warehouse and the announcement of the water", the peak international trading company officially obtained the Zheng Shang designated delivery warehouse qualification. According to the amendment to the cotton yarn futures business rules announced by Zheng Shang in March, the social warehouse delivery method will be introduced on the basis of retaining the original factory warehouse delivery, and will take the lead in implementing it in Shandong, Henan, Jiangsu and Zhejiang. As one of the eight new warehouse delivery units after the amendment is issued, Jianfeng International Trade can carry out cotton yarn futures delivery business from September 2019. Lanxi City, a subsidiary of Jinhua, is a "famous weaving city in China" and a national textile industry base. It has more than 1000 textile enterprises and an annual demand for cotton yarn of more than 1 million tons. After Jianfeng International Trade obtains the qualification for cotton yarn futures delivery, it can not only provide cotton yarn futures delivery sites for Lanxi cotton textile industry and upstream and downstream merchants, but also effectively serve Jinhua counties and cities, Xiaoshan, Shaoxing, Quzhou, Wenzhou and other places, and other provinces, and Fujian provinces. Since Jianfeng International Trade became a futures delivery warehouse in 2009, it has carried out four types of business of Dalian Commodity Exchange PVC, PE, PP and plywood. Cotton yarn delivery is the company's first business variety in Zhengzhou Commodity Exchange. At present, Jianfeng International Trade is actively organizing learning and training on cotton yarn business knowledge, actively expanding business channels, and understanding the actual needs of upstream and downstream industries to ensure the operation, service quality and delivery efficiency of this new business. (Huang Zhiyu)

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-30

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-22

Peak Pharmaceuticals Ranked "Top 100 Chinese Drugs"

From July 15 to 18, the National Pharmacy Week and China Pharmaceutical Innovation and Development Conference was held in Jinan, Shandong Province. The conference released the "2018 China Pharmaceutical Industry Top 100 Series List". Zhejiang Jianfeng Pharmaceutical Co., Ltd. ranked 74th in the "TOP100 List of Chinese Pharmaceutical Enterprises. The "2018 Top 100 Series List of Chinese Pharmaceutical Industry" is divided into five sub-lists: "TOP100 List of Chinese Pharmaceutical Enterprises", "TOP100 List of Chinese Traditional Medicine Enterprises", "TOP20 List of Chinese CRO (including CDMO) Enterprises", "TOP20 List of Chinese Medical Devices (including IVD) Enterprises" and "TOP20 List of Chinese Biomedicine (including Blood Products, Vaccines, Insulin, etc.) Enterprises. The "chemical pharmaceutical enterprise" in the "TOP100 list of Chinese pharmaceutical enterprises" refers to the enterprises whose terminal sales of chemical drugs account for more than 51% of the total terminal income of the enterprises. The selection score consists of two parts, one is the innovation driving force of the enterprise, that is, the R & D comprehensive index score of R & D investment in 2018, accounting for 40% of the weight; The second is the professional promotion power of the enterprise, that is, the terminal quantitative data determined by the final selection needs of clinicians and patients in 2018, accounting for 60% of the weight; the objects participating in the selection are pharmaceutical industry enterprises registered in China (excluding subsidiaries of multinational pharmaceutical enterprises in China) and whose main business is pharmaceutical manufacturing. The convening of the conference and the release of the list have received widespread attention from the industry. Relevant leaders of the state and Shandong Province attended the meeting, chief scientist of Peak Pharmaceutical, Chinese Academy of Engineering

2020

07-31

< 1...29 30 31...61 > 跳转到页