News Center

Home page

Peak Report

News reports

I'm on the spike for thirty years

Release time:

2020-08-14

I stepped onto the stage as a representative of the old employee who served the peak for more than

years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.

I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.

Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.

In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001

1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.

2004

5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.

2015

1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak

years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)

More information

Teachers and Students of Zhejiang Gongshang University Visit Peak Health

News from our newspaper On the morning of June 9, a group of 18 teachers and students from Zhejiang Gongshang University came to Jianfeng Health for a visit and discussion, and conducted research on the establishment of Zhejiang Gongshang University Food Industrialization Research Institute in Jinhua. The leader of this visit is Professor Song Guanglei from the School of Food and Biological Engineering, Zhejiang Gongshang University. The teachers and students are mainly from the School of Food and Engineering, specializing in food science, food safety, biochemical and biotechnology, focusing on extraction and separation, functional activity and The research of functional food, in addition to the professor of the Department of E-commerce of the School of Management Engineering and E-commerce. Chen Daiyou, general manager of Jianfeng Health, Li Wende, deputy general manager, and relevant personnel from R & D, quality management, administrative personnel and other departments attended the forum. Li Wende introduced the basic situation, technical production level, scientific and technological research and development characteristics of Jianfeng Health Company in the form of PPT, as well as the relevant policies of Jinhua Municipal Government on talent introduction. Chen Daiyou focused on the development vision of Jianfeng Health Technology and the construction of scientific and technological talents, and welcomed graduate students from the Industrial and Commercial University to join the team of Jianfeng Health after graduation. Professor Song Guanglei fully affirmed the software and hardware facilities and humanistic management of Jianfeng Health Company. He said that most of the teachers and students who came to visit this time were professional in line with the industry of Jianfeng Health Company. The two sides could carry out in-depth cooperation in product development, technology upgrading and talent reserve. Fourteen graduate students also introduced their respective situations and study and research directions. After the symposium, the teachers and students visited the health company's testing center, R & D laboratory and plant extraction workshop with great interest.

2020

07-31

Trial operation of large pharmacy micro-mall

The construction of the micro-mall of Jianfeng Pharmacy is basically ready at present. On June 17, Shuangxi and Donglai chain stores took the lead in the trial operation of the micro-mall. At present, online consumption through computers and mobile phones has become a way of life in China. In particular, various software represented by WeChat covers more than 90% of smart phones, and has many functions such as information exchange and online payment. It is a new type of shopping system based on WeChat platform, using mobile Internet technology to realize the integration of online and offline marketing. At present, there are more than 1000 kinds of commodities on the shelves of the micro-mall of Jianfeng pharmacy, mainly OTC commodities of over-the-counter drugs, which are basically synchronized with pharmacies. Customers only need to pay attention to the public number of Jianfeng Pharmacy and enter the micro-mall to collect coupons through the "online drug purchase" on the public number page. They can find the required drugs on the mobile phone to purchase and pay for them. The delivery method can be delivered to the door or the store can pick them up by itself. The purchase of drugs through the micro-mall is not only convenient and fast, but also can reduce the phenomenon of queuing in the store. According to reports, the opening of the micro mall by the big pharmacy is to expand the new service model and provide more and better extended services to the masses. Prior to this, the WeChat public number of the large pharmacy has already made a useful attempt to push health information, and the operation of the micro-mall will further provide users with new channels for seeking medical advice. While further improving the micro-mall system, the large pharmacy will add "online pharmacists" and other service items to provide users with real-time consulting services such as medication guidance, drug purchase recommendation, health care knowledge and so on in the form of voice or text. (Tang Wenshu)

2020

07-31

Spike Health gets patent grants

Recently, Jianfeng Health Technology Company's invention patent "a low-temperature and low-pressure freeze-drying method for notoginseng chewable tablets" won a patent subsidy from Jinhua Science and Technology Bureau in 2017. In order to encourage invention and creation, promote independent innovation, promote the development of patented technology and products, and speed up the transformation of patent achievements, Jinhua Science and Technology Bureau gives invention patent subsidies to enterprises within its jurisdiction every year. Patent subsidies are declared once a year. After authorization, each domestic invention patent can receive a subsidy of 40000 yuan, including 20000 yuan in Jinhua City and 20000 yuan in the district. The invention patent of spike health "a low-temperature and low-pressure freeze-drying method of notoginseng chewable tablets" obtains notoginseng chewable tablets by washing, slicing and other pretreatment of fresh notoginseng main roots, then placing them in a vacuum dryer for vacuum freeze-drying. As the top high and new technology in the field of dehydration products, the whole freeze-drying process is carried out at low temperature, which avoids the quality deterioration reactions such as oxidation of active ingredients, destruction of volatile oil and other heat-sensitive substances in the traditional drying process. It can maximize the retention of various nutrients and active substances of medicinal materials and perfectly reproduce its initial type, color and taste, it has the characteristics of light weight, fast rehydration, convenient consumption and long storage period. The actual effect, appearance and color are basically the same as those of fresh Panax notoginseng. The effective ingredients are about 50% higher than those of products processed by traditional processes such as drying and drying. It is understood that the 2017 Jinhua patent subsidy of 20000 yuan obtained by Jianfeng Health is currently in place, and the application of patent subsidy in Wucheng District is in progress. (Xu Feng)

2020

07-31

Spike Health gets patent grants

2020

07-30

Spike Health gets patent grants

2020

07-31

Group Party Committee Signed Annual Responsibility Letter Secretary Jiang Xiaomeng Put forward Five Requirements

On May 27, the Party Committee of the Group Company held a branch secretary meeting to comprehensively review and summarize the Party building work of the Company in 2016 and sign the responsibility book for the management of Party building work objectives in 2017. At the meeting, Qin xuping, member of the party Committee of the group company and director of the party-mass work department, made a comprehensive summary of the company's party building work in 2016, put forward the 2017 work plan, and conveyed the "key points of party building work in the city's two new organizations in 2017" issued by the two new working committees of Jinhua municipal party Committee, and the spirit of the speech made by the relevant leaders of the municipal party Committee at the recent meeting of the city's two new working committee, this paper explains the "ten questions" of the two new grass-roots party organizations, the "ten questions" of Party members and some problems that need attention in the process of Party member development. Members of the party committee of the group company, secretaries of grass-roots party committees and branch secretaries expressed their views and conducted extensive exchanges on such topics as how to deepen the "two learning and one doing", further play the role of party organizations in the process of enterprise operation and management, and how to do a good job in organizational construction in 2017. Jiang Xiaomeng, secretary of the party committee and chairman of the group company, on behalf of the party committee of the group, signed the 2017 party building work target management responsibility letter with the heads of the party organizations of various professional companies and directly affiliated enterprises. In his speech at the meeting, Jiang Xiaomeng said that the Politburo meeting of the CPC Central Committee held on the 26th reviewed and approved the "Decision on Amending the Regulations on the Inspection Work of the Communist Party of China" and other reports, which is a major measure to further implement the provisions of the party constitution and strengthen internal party supervision. Specific to the internal party building work of the enterprise, all cadres and party members should earnestly study relevant policies and documents, and earnestly understand the spirit of the central government

2020

07-31

< 1...45 46 47...61 > 跳转到页