I'm on the spike for thirty years
Release time:
2020-08-14
I stepped onto the stage as a representative of the old employee who served the peak for more than
years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.
I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.
Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.
In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001
1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.
5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.
2015
1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak
years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)
More information
Passion to sing praises to the party
On June 26, the Jinhua United Front "Tongxin · Ode" chorus competition to celebrate the 100 anniversary of the founding of the Communist Party of China was held at the Jinhua Cultural Center Theater. The Jinhua City Federation of Industry and Commerce team, composed mainly of peak employees, won the bronze award for the song "Under the Brilliant Sunshine" in the competition.
2021
07-01
On the morning of July 1, a grand celebration of the 100 anniversary of the founding of the Communist Party of China was held in Tiananmen Square in Beijing. Xi Jinping, General Secretary of the CPC Central Committee, President of the State, and Chairman of the National Military Commission, delivered an important speech. At 8: 00 a.m. in the conference room of the peak building, members of the party Committee of the group company, members of the management team, functional departments and employees of subordinate enterprises working in the peak building were present on time to watch the live broadcast of the celebration. The subordinate enterprises of the company also organized party members and cadres to watch the live broadcast and celebrate the party's centtieth birthday in the form of raising the national flag and reviewing the oath of joining the party.
2021
07-01
Group Party Committee Visits Old Party Members
As the 100 anniversary of the founding of the Communist Party of China approaches, on June 9, the group party committee visited and expressed condolences to old party members and party members in difficulties, and sent them holiday blessings and greetings. The picture shows Qin Xuping, member of the group's party committee and director of the party and mass work department, on behalf of the group's party committee, expressing condolences to Xu Zeng, the first batch of employees and veteran party members of Jinhua cement factory, the predecessor of the peak, when it started its business in 1958.
2021
06-22
"I volunteer to join the Communist Party of China, support the party's program, abide by the party's constitution, fulfill the obligations of party members ......" On the morning of June 6, at the site of the Gutian Conference in Shanghang County, Fujian Province, more than 30 pinnacle party members solemnly raised their right fists facing the party flag to revisit the oath of joining the party. Visiting and studying the red education base and reviewing the oath of joining the party are important contents of the study and education of party history. Yu Jianhong, Qin Xuping and Chen Tianci, members of the group's party committee, party members of various branches of the group's headquarters, and secretaries of grass-roots party organizations under the group's party committee, totaling more than 30 people, visited and studied at the Gutian conference site. Party members visited the Gutian Conference site, the Chairman's Memorial Garden, the Gutian Conference Memorial Hall and other red attractions, and presented flower baskets to the statue of Comrade Mao Zedong. The Gutian Conference was the ninth party congress held by the Fourth Army of the Chinese Workers' and Peasants' Red Army in Gutian Village, Shanghang County, Fujian Province from December 28 to 29, 1929. This meeting summed up the experiences and lessons of army building since the founding of the fourth Red Army, established the principle of the party's absolute leadership over the Red Army, combined Marxism-Leninism with the concrete practice of China's revolutionary struggle, and solved the fundamental problem of how to maintain the party's proletarian vanguard nature and build a new type of people's army by strengthening the party's ideological work. It is of great significance in the history of the development of the Communist Party of China and the Workers' and the Red Army. During the visit and study, the party members visited the display of revolutionary cultural relics, listened to the explanation, got a close understanding of the revolutionary process of building the party and army under difficult conditions, and accepted the spiritual baptism of ideals and beliefs.
2021
06-11
Spike can independently determine the level of professional skills!
A few days ago, after the examination and approval of Jinhua Human Resources and Social Security Bureau, and reported to the Provincial Department of Human Resources and Social Security for examination and record, Zhejiang Jianfeng Group Co., Ltd. was approved to independently identify the level of vocational skills. High-skilled talents are an important part of the enterprise talent team, and they are the backbone to promote technological innovation and promote the transformation of modern scientific and technological achievements into real productivity. Therefore, Jianfeng Group attaches great importance to strengthening the construction of senior technicians, technicians, senior technicians and other talent teams and the training of skilled talents. In recent years, the entire group company has carried out various forms of skills training based on the improvement of employees' job skills. Last year alone, more than 8000 person-times of job skills training were held, which improved employees' professional skills and business capabilities. Under the background of digital and intelligent production, effectively stimulating front-line employees to learn skills and drill business, and cultivating and building a highly skilled workforce is one of the important means to promote the high-quality development of enterprises. At the beginning of the year, the human resources department of the group began to prepare to rely on the national vocational skill identification standards, and formulated the national vocational skill level independent identification scheme of Jianfeng group for the group's two main businesses of cement and pharmaceutical industry. after the comprehensive evaluation of the municipal human resources and social security bureau and Jinhua vocational skill management service center, the group company was agreed to become the independent identification unit of vocational skill level. The success of the application for the independent identification of the vocational skill level of the group company marks the company's skilled talent evaluation work, which has realized the transformation from government-led to the autonomy of employers, combining evaluation with training, use and incentives, and expanding the growth channel of skilled talents. It has laid a good foundation for promoting skill upgrading actions and building knowledge-based, skilled and innovative industrial workers. The positions independently identified by the group company's professional skill level are mainly in the two main businesses of cement and pharmaceutical industry, specifically cement production workers (including cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker, etc.) and pharmaceutical preparation workers. The group is about to carry out the independent identification of vocational skill levels for these two categories of work.
2021
05-21
On April 27, Qiandongnan Prefecture of Guizhou Province held a conference to celebrate the "May 1st" International Labor Day. Huangping Jianfeng Cement Company was awarded the May 1st Labor Certificate of Qiandongnan Prefecture at the conference. Tang Yueqiang, Secretary of the Party Leadership Group and Director of the Standing Committee of the People's Congress of Qiandongnan Prefecture, hoped in his speech that the broad masses of employees in the prefecture will keep in mind the ardent entrustment of General Secretary Xi Jinping, closely focus on the overall situation of the prefecture, consciously shoulder the glorious mission, and vigorously promote the spirit of model workers and labor. The spirit of craftsmanship and the spirit of Guizhou in the new era are striving to be knowledge, skilled and innovative workers in the new era, make new contributions and create new glories in the new journey of building socialist modernization. The conference named and commended the collectives and individuals who won the Qiandongnan May 1st Labor Award, the Worker Pioneer, and the Qiandongnan Craftsman Honors. 40 units including Huang Ping Jianfeng won the Qiandongnan Prefecture May 1st Labor Award. In addition, on the afternoon of May 7, Huangping County, Guizhou Province held the 2021 model worker and advanced worker commendation meeting to commend 11 model workers and 19 advanced workers. Qian Jiang, deputy secretary of the Jianfeng Party branch of Huangping and chairman of the trade union, was awarded the honor of "model worker" in Huangping County. Yang Zhi, deputy secretary of the Huangping County CPC Committee and county magistrate, called on the whole county to vigorously carry forward the spirit of model workers, labor spirit, and craftsmanship, so as to make it a common practice to advocate model workers, learn from model workers, and strive to be model workers, and further gather powerful forces to speed up the high-quality development of Huangping. As a model worker representative, Qian Jiang made an experience exchange speech at the conference.
2021
05-21
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page