Learning safety guidance materials
Release time:
2020-08-14
Learning Safety Tutoring Textbook Feeling
Safety knowledge is a hodgepodge, which contains a lot of contents, including safety laws and regulations, safety technical knowledge such as machinery, electricity and special equipment, safety production management contents such as safety production standardization, safety production inspection and hidden danger management, etc.
Employees are the core of corporate safety. Each employee must have a good safety awareness and improve the subjective initiative and safety skills of personal safety in order to truly obtain safety protection. The work of the internal personnel of the enterprise has its own division of labor, and the safety knowledge that needs to be learned is also different. Electricians need to know the knowledge of safe operation with electricity, mechanics need to learn the knowledge of safe operation such as welding and gas cutting, and operators need to master the corresponding risk countermeasures according to the job type and the identified safety risk factor category.
Enterprise employees learn safety knowledge in many forms, including internal training, training organized by safety supervision, through the Internet, newspapers, media, etc., but these knowledge are more specific but not systematic and comprehensive.
Where can I learn systematic safety knowledge? How can I learn some safety production knowledge that I want to know? In recent years, I found that the "Certified Safety Engineer Qualification Examination Guidance Textbook" has very systematic safety knowledge and management knowledge, which is very worthy of our study.
Through study, I have been well applied in practical work. For example, during a safety inspection, I found that there is a potential safety hazard in the water supplement of the circulation box in a workshop. The water supplement pipeline adopts temporary hose (outer diameter 40 cm or so), and water is taken from one side of the pedestrian passage to connect the pipeline. The pipeline is directly placed on the ground and leads to the other side of the road, the water outlet flows into a one-meter-high water tank. Due to the height difference and the heavy pipe, two metal ball valves (each weighing about 2 kg) are used to press the pipe without fixing measures. There are four categories of risk factors in the production process, namely, human factors, no factors, environmental factors and management factors. We usually think that this pipe is not dangerous. In fact, this kind of behavior has two potential safety hazards. A
cm high pipe is placed horizontally on the pedestrian passage. In case someone does not pay attention to it when passing, stumbles and falls down and is injured, an accident will occur. The two metal ball valves have no fixing measures. Some staff members work beside the water tank and touch the pipe with height difference. The pipe falls off, two ball valves also fall at the same time, hitting employees, and accidents will occur. It is also possible that a pedestrian stumbled on the pipe and drove the pipe at the inlet of the water supplement tank. The pipe with height difference fell, causing the ball valve to fall. The person who stumbled on the pipe may be injured, the person beside the water supplement tank may be injured by the valve, and two safety accidents occurred at the same time. In the above example, the explanation of safety knowledge is that the safety awareness of the temporary pipeline placement personnel and the safety management personnel in the workshop is weak, and they do not know that the pedestrian passage in the production and operation site must be unobstructed and cannot exist in an unstable state. These two safety principle knowledge are explained in these principle guidance materials.
So, how do we eliminate the above security risks? We can install a fixed water supply pipeline from a height or buried in the ground, and the valve disappears at the scene, so the pedestrian passage is unobstructed, and the unstable state of the object (valve) does not exist, and the hidden danger will not be eliminated.
Through the study of "Certified Safety Engineer Qualification Examination Guidance Textbook", we know that all safety accidents can be prevented and avoided. Every accident has its cause. Starting from the root cause of the accident, we can cut off the conditions for the occurrence of the accident, so that we can prevent the occurrence of accidents, analyze and summarize all kinds of safety accidents, and draw inferences from one instance, take other people's accidents as our accidents, learn from them and avoid similar accidents.
The author suggests that when all units purchase learning books with various qualifications, they should not forget to register books with professional qualifications for safety, buy them and distribute them to relevant management personnel, or put them in the reading room for everyone to borrow. This year is our company's "year of safety education", so that we can learn more about safety. (Song Shijie, Production Department, Pharmaceutical Company)
More information
On January 4, the Jinhua Federation of Industry and Commerce held the sixth member congress. Jiang Xiaomeng, chairman of the group company, was elected as the chairman of the Jinhua Federation of Industry and Commerce at the meeting, and served as 20 "2016 Xinyi Good Wu Merchants" One of the commendations from relevant departments. Jinhua city leaders Zhao Guangjun, and military and civilian, Huang Jinchao, Chen Xiao, Shao Guoqiang, Xu Zhangcai attended the opening ceremony of the conference. Zhao Guangjun, Secretary of the municipal Party committee, congratulated the convening of the conference on behalf of the four groups of the city. He hoped that the Federation of industry and Commerce at all levels and the majority of non-public economic personages would unify their thoughts and actions to the deployment requirements of the plenary session of the municipal Party committee, further strengthen their confidence, grasp the general trend, forge ahead, always maintain the correct political direction, firmly promote the development of non-public economy, and make greater contributions to the rise of Zhejiang. At this meeting, Jiang Xiaomeng, chairman of the group company, was elected as the new chairman of the Jinhua City Federation of Industry and Commerce. Jiang Xiaomeng said in his speech that the Federation of Industry and Commerce is a bridge and link between the party and the government to connect with people in the non-public economy, an assistant to the government in managing and serving the non-public economy, and an important window for the interests of the broad non-public economy. it represents the fundamental interests of the broad non-public economy. In the next five years, the new Federation of Industry and Commerce will continue to enhance cohesion and influence based on service; give full play to the role of "guidance" and "bridge", and always maintain sensitivity to the new situation with advanced awareness and long-term vision, and pay close attention to domestic and foreign Industrial development trends and economic development trends, timely discover new situations, study new problems, and act as a bridge between the government and enterprises
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-31
Since the beginning of the 2016 qualification evaluation work of the group company in late November, it has been carried out in an orderly manner according to the established procedures. Compared with previous years, this year, according to the actual situation of the company, new cement plate job settings and development channels and other content. According to the provisions of the Company's Measures for the Administration of Staff Qualifications, the scope of application of the qualification assessment is for all employees of the Group's non-administrative position series, which is divided into three categories: management, technology and technical operation. Among them, the management and technical categories are divided into five grades, each with 2-4 grades; the mechanic operation category is divided into four grades, each with 2-4 grades. The Group Company establishes a qualification evaluation committee, which is responsible for guiding the evaluation of the qualifications of the Group Company, and conducting the evaluation of the qualifications of each department (office) of the Group Company and the qualifications of four levels and above within the scope of the Group Company; professional companies and directly affiliated enterprises establish an evaluation organization, which is responsible for the evaluation of the qualifications of the enterprise and subordinate enterprises at level 3 and below; the Human Resources Department of CNPC is responsible for organizing the review work and carrying out the transactional work of qualification management. Compared with previous years, the company has made a supplementary revision to the "Measures for the Administration of Employee Qualifications" this year, adding a "cement sector position setting and development channel", aiming at the actual situation and professional characteristics of the current two cement companies implementing job optimization, positions such as safety and environmental protection management, sales management, procurement, warehouse management, quality management, equipment maintenance (management), electrical maintenance (management), process operation, inspection workers, etc. are set up respectively, and different levels are divided, and corresponding evaluation standards are set. In accordance with the Management Measures, the post
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-30
"Peak" was identified as China's well-known trademark
Recently, the Trademark Office of the State Administration for Industry and Commerce issued a document that the "Jianfeng" trademark held by Jianfeng Pharmaceutical Company was recognized as a well-known trademark. The main contents of the "Reply of the Trademark Office of the State Administration for Industry and Commerce on the Identification of" Jianfeng "Trademark as a Well-known Trademark" (Shang Standard Chi Zi [2016] No. 121) are as follows: according to the relevant provisions of the Trademark Law, the regulations for the implementation of the Trademark Law and the provisions on the identification and protection of well-known trademarks, after examination and research, it is recognized that the registered trademark of "Jianfeng" used by Zhejiang Jianfeng Pharmaceutical Co., Ltd. in category 5 of the International Classification of Goods and Services for Trademark Registration is a well-known trademark. The identification of the well-known trademark has effectively enhanced the brand value of the company, helped to improve the popularity of the company's products, and further strengthened the protection of the "peak" trademark. (Zhou Hengbin) News link: "well-known trademark" (Well-knownTradeMark), also known as well-known trademark, first appeared in the Paris Convention for the Protection of Industrial property signed in 1883. According to international and domestic intellectual property laws and regulations, the well-known trademark system is created to fully protect the legitimate rights and interests of well-known trademark owners. Its purpose is to reasonably protect the relevant trademark ownership, maintain fair competition, and stop infringement of others' trademark exclusive rights. behavior. China joined the Convention in 1984, according to the provisions of the Convention to give special legal protection to well-known trademarks, has become an important part of China's trademark legal work. Well-known trademarks in China (ChinaFam
2020
07-31