Small target to enhance combat effectiveness
Release time:
2020-08-14
Small Goal Enhances Combat Effectiveness
At the Party Member Democratic Life Meeting held on 2017 10# August 17 , the Party Branch of Jianfeng Health Technology Company launched a special activity. Each Party member put forward a small goal for the fourth quarter based on the characteristics of their posts and actual work.
The Spike Health Party Branch is composed of party members from two companies, Spike Health and Spike Cable. Because the daily work is not related, there are fewer opportunities for communication. The fourth quarter is the sprint stage. In order to strengthen the sense of responsibility of Party members, give full play to the exemplary and leading role of Party members, and improve the work efficiency in the fourth quarter, Zhang Ci, member of the Party branch and manager of the marketing department of the cable company, put forward the suggestion that each Party member should set a small goal for the quarter. As the initiator of this activity, her small goal is to complete 10 million orders in the fourth quarter. She said that her goal could not be achieved by individuals alone, and that she needed to rely on the joint efforts of the entire plant. She broke down and implemented this small goal step by step, inspired by morning meetings, formulated phased goals to complete reward policies, etc. to boost morale, and finally exceeded the goal, and the number of orders received in 11 also created a new high for cable companies in the past 7 years.
Peak Health and Safety Officer Zhou Guangliang's small goal is to complete the three-level acceptance of safety production standardization. After the goal was set, on the one hand, he actively prepared relevant application materials, communicated with colleagues in the department, and got their support and recognition; on the other hand, he strengthened communication with relevant departments, found problems, and improved in time. He said that after setting small goals, the planning and initiative of the work will be stronger, and his working methods and methods will be changed, which will also help to improve his working ability.
Cable Company's Shenggao Warehouse is responsible for the distribution of goods, and it is inevitable to receive complaints at ordinary times. Caused by cable damage when loading; wet packaging on rainy days; shipping company delivery delay arrival ...... are the cause of customer complaints. So Shenggaocang's small goal is to deliver zero complaints. Every time the factory delivers goods and loads the truck, he will supervise and urge the driver to pay attention to prevent bumping. In order to prevent the outer package from getting wet during the transfer process in rainy days, rainproof measures should be taken during delivery. According to the product quantity, journey, delivery time and other factors, find a suitable shipping company; He will also work overtime to send out some products with urgent delivery, striving to satisfy customers, do not bring bad influence to customers due to distribution problems. Because of some uncontrollable factors, there will still be situations, so zero distribution complaints have always been the goal of Shenggaocang.
The small goal of Yang Hao of Peak Health Research and Development Department is to do a good job of supporting the market and sales in the performance sprint stage, and not to delay sales. Chen Anping's small goal of Peak Health Quality Department is to detect the change of mentality to service type. Bao Jieming's small goal of Peak Health Finance Department is to strengthen the accuracy of financial data and the diversity of methods; the small goal of Lu Chaofang, the technical quality department of the cable company, is to complete the declaration of two patents, the declaration of the central plastic pipe and cable project, and the quality system change; the small goal of the cable company workshop Shen Ke is to learn to bill independently ...... All party members actively set small goals for themselves within the framework of enterprise development. Everyone said that this will help clarify the direction of work, increase the motivation of work, and be more responsible.
Chen Daiyou, secretary of the Jianfeng Health Party Branch, said that the purpose of carrying out this activity is to hope that party members can give full play to their leading role in the production and operation of the two companies. By setting and completing the quarterly small goals of party members, they can encourage each other, drive each other, and change their work style and attitude, so as to improve work efficiency and ensure the completion of the company's annual targets. At the same time, the establishment of quarterly small goals can also enhance the sense of responsibility and self-discipline of party members, strengthen the management of party members' goals, strengthen the supervision of the party, give full play to the vanguard and exemplary role of party members, enhance the cohesion and combat effectiveness of the branch, and further promote the party building work and various tasks to achieve new development. (Reporter Ni Yingzhen) Postscript of
Interview:
Setting small goals for yourself is a process of self-pressurization and self-challenge. Through the formulation of small goals, employees can be more clear about their work and the direction of their efforts, concentrate their attention, and enhance their sense of responsibility and enthusiasm in the process of thinking about how to accomplish small goals.
The goal is not only the direction of struggle, but also a spur to oneself. Many of the small goals put forward by the party members of the Jianfeng Health Branch are the work that they need to complete next. Even if they have not set this small goal, they still need to be completed. However, if this small goal is set, the work will have clear goals and specific steps, which can coordinate everyone's actions, enhance the initiative of the work, reduce blindness, and make the work proceed in an orderly manner. At the same time, the plan itself is an assessment standard for the progress and quality of work, which has a strong restraint and supervision effect on everyone. Setting small goals has both guiding and promoting effects on the work. It can enable everyone to strive towards this goal in a more planned way, and ensure that they can supervise themselves, motivate others, make progress together, and complete the work better.
Of course, when setting small goals, you should not be blind. You must make sure that this goal is achievable by yourself, feasible, or challenging. If you make it blindly and cannot follow the plan, it will hit your enthusiasm. Grand goals are often vague. Once you want to take action, you will feel that you don't know where to start. And sometimes, because the grand goals are too beautiful, they will make people indulge in fantasy and further dispel the fighting spirit. The small goal is close, although there will be a certain degree of difficulty but can be overcome, through the existing capacity can be decomposed into specific implementation steps. Just like the cable company in the process of achieving the fourth quarter 1000 order target, this small target was broken down into smaller targets, and the corresponding reward policy was introduced in 11 . Set small goals in stages, and reward employees accordingly after the goals are achieved. Moreover, these small goals can be achieved through hard work. This will not only motivate employees, but also increase their confidence and morale, and also provide the possibility for the smooth completion of large goals.
More information
The Sixth Plenary Session of the 18th Central Committee of the Communist Party of China was held in Beijing from October 24 to 27. It reviewed and approved the "Several Guidelines on Political Life within the Party under the New Situation" and the "Regulations on Inner-Party Supervision of the Communist Party of China. On November 22, the party committee of the group company successively held party committee and branch secretary meetings to learn the spirit of the sixth Plenary session of the 18th CPC Central Committee and put forward requirements for organizational construction and party member management. At the branch secretary meeting, Jiang Xiaomeng, secretary of the party committee of the group company, preached the main contents of "some guidelines on Inner-Party political Life under the New situation" and "regulations on Inner-Party Supervision of the Communist Party of China. He pointed out that seeking truth from facts, integrating theory with practice, keeping close ties with the masses, criticizing and self-criticism, democratic centralism, and strict party discipline are the basic norms and working principles of inner-party political life accumulated by the Communist Party of China for several generations. In the new social environment, some party members and cadres have bred some unhealthy atmosphere, which has damaged the image and interests of the party, the Sixth Plenary Session of the 18th Central Committee of the Communist Party of China proposed to strengthen and standardize the political life within the party, take the party constitution as the foundation, adhere to the party's political line, ideological line, organizational line and mass line, strive to enhance the political, contemporary, principled and fighting nature of the party's political life, and strive to enhance the party's ability of self purification, self improvement, self innovation and self improvement, Efforts should be made to improve the party's leadership and governance level, efforts should be made to safeguard the authority of the Party Central Committee, ensure the unity and unity of the party, maintain the advanced nature and purity of the party, and strive to form a centralized, democratic and disciplined party in the whole party
2020
07-31
Jinxi plant environmental protection facilities through the completion of acceptance
On November 1, Jianfeng Pharmaceutical Jinxi Pharmaceutical Factory successfully obtained the approval from Zhejiang Environmental Protection Department that the environmental protection facilities of the project passed the completion acceptance, and a key work of Jianfeng Pharmaceutical in 2016 came to an end. Jianfeng Pharmaceutical's annual output of 35 tons of cephalosporins, anti-tumor drugs and other raw material production lines and various preparation production lines technological transformation projects started construction in Jinxi Development Zone in October 2012 and were almost completed in September 2015. The construction of the project strictly abided by the "three simultaneous" system of environmental protection, conscientiously implemented the requirements in the environmental impact assessment report and its approval documents, and invested 19.34 million yuan in environmental protection facilities. The plant has basically realized the separation of clean and sewage. A new wastewater treatment system with a daily treatment capacity of 700 cubic meters and a "physical, chemical and biochemical" treatment process has been built, and an online monitoring device networked with the environmental protection department has been installed. All kinds of production wastewater, public works wastewater and domestic sewage are treated by the wastewater station and sent to Jinxi Sewage Treatment Plant for centralized treatment; there is an RTO regenerative incineration device of 10000 cubic meters per hour and a centralized treatment device of 4000 cubic meters per hour for chlorine-containing organic waste gas. All kinds of waste gas are discharged after collection and treatment. In October 2015, with the approval of Jinhua Economic and Technological Development Zone Branch of Jinhua Environmental Protection Bureau, the trial production of Jinxi project was carried out. After more than half a year of operation, in early July 2016, Zhejiang Environmental Monitoring Center Station carried out completion acceptance monitoring of environmental protection treatment facilities such as waste water and waste gas of Jinxi Pharmaceutical Factory, and issued a completion acceptance monitoring report of environmental protection facilities at the end of August.
2020
07-31
Jinxi plant environmental protection facilities through the completion of acceptance
On November 1, Jianfeng Pharmaceutical Jinxi Pharmaceutical Factory successfully obtained the approval from Zhejiang Environmental Protection Department that the environmental protection facilities of the project passed the completion acceptance, and a key work of Jianfeng Pharmaceutical in 2016 came to an end. Jianfeng Pharmaceutical's annual output of 35 tons of cephalosporins, anti-tumor drugs and other raw material production lines and various preparation production lines technological transformation projects started construction in Jinxi Development Zone in October 2012 and were almost completed in September 2015. The construction of the project strictly abided by the "three simultaneous" system of environmental protection, conscientiously implemented the requirements in the environmental impact assessment report and its approval documents, and invested 19.34 million yuan in environmental protection facilities. The plant has basically realized the separation of clean and sewage. A new wastewater treatment system with a daily treatment capacity of 700 cubic meters and a "physical, chemical and biochemical" treatment process has been built, and an online monitoring device networked with the environmental protection department has been installed. All kinds of production wastewater, public works wastewater and domestic sewage are treated by the wastewater station and sent to Jinxi Sewage Treatment Plant for centralized treatment; there is an RTO regenerative incineration device of 10000 cubic meters per hour and a centralized treatment device of 4000 cubic meters per hour for chlorine-containing organic waste gas. All kinds of waste gas are discharged after collection and treatment. In October 2015, with the approval of Jinhua Economic and Technological Development Zone Branch of Jinhua Environmental Protection Bureau, the trial production of Jinxi project was carried out. After more than half a year of operation, in early July 2016, Zhejiang Environmental Monitoring Center Station carried out completion acceptance monitoring of environmental protection treatment facilities such as waste water and waste gas of Jinxi Pharmaceutical Factory, and issued a completion acceptance monitoring report of environmental protection facilities at the end of August.
2020
07-31
Jinxi plant environmental protection facilities through the completion of acceptance
On November 1, Jianfeng Pharmaceutical Jinxi Pharmaceutical Factory successfully obtained the approval from Zhejiang Environmental Protection Department that the environmental protection facilities of the project passed the completion acceptance, and a key work of Jianfeng Pharmaceutical in 2016 came to an end. Jianfeng Pharmaceutical's annual output of 35 tons of cephalosporins, anti-tumor drugs and other raw material production lines and various preparation production lines technological transformation projects started construction in Jinxi Development Zone in October 2012 and were almost completed in September 2015. The construction of the project strictly abided by the "three simultaneous" system of environmental protection, conscientiously implemented the requirements in the environmental impact assessment report and its approval documents, and invested 19.34 million yuan in environmental protection facilities. The plant has basically realized the separation of clean and sewage. A new wastewater treatment system with a daily treatment capacity of 700 cubic meters and a "physical, chemical and biochemical" treatment process has been built, and an online monitoring device networked with the environmental protection department has been installed. All kinds of production wastewater, public works wastewater and domestic sewage are treated by the wastewater station and sent to Jinxi Sewage Treatment Plant for centralized treatment; there is an RTO regenerative incineration device of 10000 cubic meters per hour and a centralized treatment device of 4000 cubic meters per hour for chlorine-containing organic waste gas. All kinds of waste gas are discharged after collection and treatment. In October 2015, with the approval of Jinhua Economic and Technological Development Zone Branch of Jinhua Environmental Protection Bureau, the trial production of Jinxi project was carried out. After more than half a year of operation, in early July 2016, Zhejiang Environmental Monitoring Center Station carried out completion acceptance monitoring of environmental protection treatment facilities such as waste water and waste gas of Jinxi Pharmaceutical Factory, and issued a completion acceptance monitoring report of environmental protection facilities at the end of August.
2020
07-30
Daye Jianfeng Safety Standard was awarded as the only award-winning enterprise in daye city in 2015.
Due to the achievements made in the establishment of secondary safety production standardization, daye peak cement company recently received a special award of 200000 yuan from daye municipal government. In order to encourage industrial and commercial enterprises in the region to improve their production safety, daye municipal government set up a special fund in 2015, stipulating that 200000 yuan will be awarded to those who pass the secondary safety standardization review before December 31, 2015. It is understood that among the industrial and commercial enterprises in daye city, there were 4 enterprises that applied for and passed the examination in 2015, but only daye peak passed the examination before December. Therefore, Daye Peak has become the only enterprise that has won the special award for the establishment of the safety standard in Daye City in 2015. (Ye Meifang)
2020
07-31
Two Cement Enterprises Start to Implement "Big Patrol Inspection"
With the change of the competition situation in the industry, the profit space of cement production enterprises has been greatly squeezed. Reducing costs and increasing efficiency and job optimization have become the inevitable choice to improve the enterprise's own development ability and enhance the core competitiveness. In accordance with the requirements of the group company to realize the transformation from extensive management to lean management, combined with the advanced experience of peer enterprises, recently, Yunnan peak, daye peak two enterprises have implemented "big inspection" to promote the overall optimization of posts. On November 1, daye peak post inspection officially started full operation, starting from the limestone storage yard at the source of the production line to the cement storage. the original 15 posts were merged, and the best experienced mechanics, electricians and post workers were transferred to form a large inspection class, which was mainly responsible for on-site emergency disposal and post routine maintenance to ensure the normal production of the whole production line. In order to ensure the smooth implementation of the large-scale inspection, daye peak management team has repeatedly communicated and discussed with the heads of relevant workshops and departments, and held a special workshop post optimization promotion meeting in September to clarify objectives and responsibilities, formulate implementation steps, and do a lot of preparatory work. At the kick-off meeting for the implementation of the large-scale inspection on October 31, Zhang Fengliang asked daye peak employees to recognize the current situation of serious cement overcapacity and cruel market competition, understand the necessity of implementing the large-scale inspection, and asked the workshop leaders to do a good job in training and guiding the employees, shorten the transition period, normalize the operation of the large-scale inspection as soon as possible, and at the same time, managers should also change their working ideas and concepts and do a good job in full-time, strengthen the inspection, overhaul and maintenance of the regular day shift, and find and solve the problems existing in the equipment and process in time.
2020
07-30