I have a date with Spikes
Release time:
2020-08-14
I have an appointment with Jianfeng
■ Yunnan Jianfeng Luo Meiyan
As the saying goes, "rely on mountains to eat mountains, rely on water to eat water". In my hometown Pu 'er, there is no vast sea or endless grassland. Looking around, there are mountains everywhere. Because it belongs to the karst landform, the mountains cannot effectively develop agriculture. The villagers have been in the wind and rain for generations. From sunrise to sunset, they still cannot fill their stomachs. Therefore, they especially envy those who work in factories. In the year of
, I was still young, and the first factory was built in my hometown, which was a cement factory. In order to support the construction of the factory, my father and the villagers gave up the only paddy field for raising seedlings. The cement factory is less than a mile away from my home. My brother works in the factory, and colleagues often come to play at home. Listen to the elder brother said, some elder brothers do machine repair, some elder sisters do laboratory tests. I asked curiously: "how to test it?" the sisters told me a lot, what titration end point from red to bright yellow, yellow to bright purple, and so on. Although I don't know what it means, I still listened very hard and thought to myself, this kind of technology is so mysterious! Since then, I have been full of fantasy and expectation for the subject of "laboratory tests. In the year of
, I graduated, and I happened to buy the cement factory in front of my house to build a bigger and more advanced one. When I went to apply for a job, the director said, "I know you have the certificate of electronicist and the certificate of storekeeper, but now we have no shortage of people. Only the central control building has just been built and there is a shortage of cleaners. What are you doing?" I asked, "Is it connected to the laboratory?" He said, "It's the building in the laboratory." Hearing this sentence, I readily replied: "dry!"
At that time, the face of Yunnan Jianfeng Cement Company had not yet taken shape. The ground was freshly planed loose soil, and the roads were mud roads. Workers, construction teams, installation teams, and material delivery came and went. It was rainy season. The mud ground stepped on a pit, and mud and water could pass through the instep. Everyone comes and goes with the central control building as the center. Just one staircase, sweeping down from the top of the building to the hall, has to dump a few baskets of soil. As soon as I go to work every day, I sweep the stairs twice, drag them twice, and then wipe them twice with a towel. Usually, I haven't finished yet. When I come up, the mud on my feet is enough to clean for half a day. In addition to the stairs and corridors, I am also responsible for the hygiene of several leading offices and conference rooms. The conference room has a lot of meetings, often for five or six hours at a time. After making tea in my room and cleaning outside, I am often too busy to have breakfast. At the end of the day, when I got home, I didn't even have the strength to eat. I fell asleep on the sofa. Although I work very hard every day, my heart is full of motivation when I can watch the laboratory technicians go to and from work. Because I have never thought of "giving up", because I have always had a goal-to do tests. The difficult environment in the early days of the factory polished my patience and carefulness, which is also the quality of a laboratory technician.
went through several positions. A year ago, I was finally transferred to the current quality management department. I was so excited. On the first day of work in the new post, I saw neat rows of laboratory equipment, like standing in front of the sacred hall, serious and mysterious, making people eager to walk in. At first, I couldn't remember the steps, so I had to hold the book and learn step by step. Seeing the old masters operating with ease, don't mention the envy in my heart! To make matters worse, even if you hold a book, you often make mistakes while doing it. You forget to add too much EDTA when titrating aluminum and potassium sodium sakei when titrating magnesium. All kinds of situations always occur. But I will not surrender to difficulties! In those days, I did what others did at work, what others did at lunch break, what others did after work, over and over again, over and over again, and my hands were often burned with big scars and small marks by electric stoves. Any link, as long as I feel is not perfect, I will do it again, until the result is very accurate, I will let myself go. Many samples absorb water quickly and need to be very agile in weighing samples. In view of this, one day I practiced weighing 0.1000 g samples from morning till night, and I did not stop until I finally needed only one spoonful of samples to be within the range. As soon as the spirit relaxed, I found that my legs were swollen, but the pride in my heart far exceeded the pain of my feet.
is probably practice makes perfect. After more than a year of study and exercise, I can now do it in an orderly way. I will never forget what to add or get burned. Although the process of work is monotonous and repetitive, I never think it is boring, but I think it is a kind of enjoyment, especially when the results come out, I will feel happy sincerely. When new colleagues join, I will patiently break down each step to show them, tolerate their carelessness and learn from their advantages. I know that there is no best technology, only better technology; only by standing high can you see farther.
I love my job, I will "date" with spikes to the end!
More information
Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons
In order to implement the requirements of the higher-level party committee secretary to give in-depth party lectures in enterprises, on July 4, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special lecture on "two studies and one doing" for party members at Yunnan Jianfeng Cement Company. In the lecture, Jiang Xiaomeng started from the background, overall requirements, learning and education content, and main measures of the "two studies and one doing" activities. He hoped that all party members and cadres would understand "awe, gratitude, humility, and decent", and put forward "What should the current enterprise do" and "How should the enterprise go in the future" and other issues. Jiang Xiaomeng analyzed the future development trend of cement and pharmaceutical industries in detail, emphasized the importance of seizing opportunities, and pointed out that with the homogenization of cement industry becoming more and more serious, if we want to take the road of differentiated brand development, the core of competition is to strengthen self management and maximize the cost, so as to improve the competitive advantage. As far as Yunnan Jianfeng is concerned, it is necessary to continuously improve the level of process technology management and increase the hourly output by increasing inspection efforts. Starting from strengthening the control of raw material procurement, the quality and price should be controlled. By strengthening sales management, vigorously develop direct agents, and strive to maximize the profit per ton; By strengthening equipment maintenance, reduce equipment accidents and further reduce the consumption of machine materials; Make good use of people, while constantly tapping talents and cultivating new people, we will gradually control the total number of workers and improve labor productivity. According to the current situation and the company's development strategy, what should the party members of the peak do? Jiang Xiaomeng asked all the party members and cadres of Yunnan peak to play a good vanguard and exemplary role and take the lead in learning new knowledge, new technology and new experience.
2020
07-30
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-30
The Company shall organize special operation safety management training
What kind of management process is needed for the special operation permit? How to manage the ticket of the special operation permit? What are the contents of the eight kinds of special operations?... On June 17, the safety committee of the group company organized a special lecture on safety production to conduct systematic and comprehensive training on the safety management knowledge of special operations. The trainer invited for this training is Ge Zhengliang, head of EHS (Environmental Environment, Health Health, Safety) of Zhejiang Prodbang Pharmaceutical Co., Ltd. He has many years of experience in enterprise safety production management and is also a well-known safety management expert in Jinhua region. He has participated in the enterprise safety and environmental protection inspection organized by Jinhua Safety Supervision Bureau for many times and has a certain understanding of the situation of major enterprises in the peak. In this lecture, Ge Zhengliang divided into four parts: division of special operation license scope, special operation license management process, special operation license ticket management, and eight major types of special operation contents. Combined with relevant laws and regulations and his own practical experience in safety production management, Ge Zhengliang explained in simple terms eight special operation situations such as hot work, hoisting, high place, temporary power consumption, open circuit, blind plate plugging, restricted space, etc, standardize the licensed business division, approval department, the places to be paid attention to in the approval management of each type of operation, the responsibilities of the relevant approval department, the matters needing attention in on-site operation, the approval process, ticket management and other knowledge, and make a detailed description of the relevant special operation contents according to the working characteristics of peak subordinate enterprises. In addition, he also shared the experience of special operation safety management of Plo Pharmaceutical.
2020
07-31
Yunnan Jianfeng won the honor of "key leading enterprise in Pu'er City"
Recently, Yunnan Jianfeng Cement Company was awarded the honorary title of "2016 Pu'er Key Leading Enterprise" by the Pu'er Municipal Party Committee and Municipal Government. In recent years, according to the requirements of the group company's "three reductions and three improvements", Yunnan Jianfeng has focused on internal management and external market expansion, tried every means to reduce costs in production, timely controlled market trends in sales, and constantly refreshed various business indicators. While striving to create its own brand value, Yunnan Jianfeng always regards giving back to the society and serving local development as its own responsibility and obligation. Since the establishment of the company, Yunnan Jianfeng has actively responded to the government's call to support the construction of poor border areas and provide free cement to some poor people. Support the education construction in border areas and donate funds for students in need. At the same time, it has paid various taxes and fees on time in accordance with the law and has become a major profit and tax producer in Pu'er City for years. It has gradually grown from a new cement enterprise in Pu'er area to a leading enterprise in the cement industry. The honor of "key leading enterprises in Pu'er City in 2016" is the affirmation and recognition of Yunnan Jianfeng's work over the past few years by the local government and society. During the "Thirteenth Five-Year Plan" period, southwestern Yunnan is about to usher in an explosive stage of development. The construction of international railway projects, the construction of border expressway projects, the construction of airport projects and the construction of people's livelihood projects will all start this year. The acquisition of the honorary title of "Key Leading Enterprise in Pu'er City in 2016" will also provide strong support for Yunnan Jianfeng to strive for the right to supply these projects. (Li Yun)
2020
07-31