News Center

Home page

Peak Report

News reports

"Busy Man" Zhao Chunquan

Release time:

2020-08-14

Zhao Chunquan, entered Jianfeng Pharmaceutical Company in 8# May 2009 , and entered Jianfeng Health Technology Company in 2014 . He is currently the director of Jianfeng Health Plant Extraction Workshop and the director of Chinese Herbal Pieces Workshop.

"Busy Man" Zhao Chunquan

Zhao Chunquan is a busy man. He plunges into the workshop site as soon as he goes to work every day, and it is difficult to find him in the office. When he finally saw him after an "appointment", he was covered with yellow powder and joked with a smile that "I just came back from work on the construction site". In fact, he had been busy in the Chinese herbal medicine workshop for a long time.

Zhao Chunquan has been busy since he took part in the work-entered the factory, 9 participated in the preparation of the plant medicine factory, responsible for the installation, debugging and trial production of the equipment, followed by the pharmaceutical health care product workshop, the peak health Chinese medicine decoction pieces and the plant extraction workshop. In the past few years of peak work, a workshop was basically built. He used to participate in debugging, trial production, straightened out and handed over, and then started a new project.

has gone through debugging, trial production and certification work in several workshops. Zhao Chunquan is also experienced, but he said that the busiest is the newly-built automatic extraction workshop. Everything is new, the new equipment is more advanced, the production process is new, there are many things to learn, and besides the study of hardware equipment, they should also be familiar with computer operation. The newly recruited employees in the workshop basically have no experience in drug production. They should not only teach equipment operation, but also teach labor discipline, GMP knowledge, safety production, etc, all this work is on him.

2015 12# In mid-April, the planting workshop entered the equipment commissioning stage. Zhao Chunquan first followed the manufacturer's personnel to learn the equipment operation one by one. The whole workshop is expected to have 170 sets of equipment. In order to ensure the smooth progress of the follow-up work, it can only be carried out overtime. During that half a month, there was no lunch break or weekend, and finally the debugging was completed at the end of the month.

In the trial production stage, although the manufacturer has also organized relevant training, it still depends more on Zhao Chunquan. At the beginning of the trial production, he took the staff with him from the equipment principle, operation method, matters needing attention, production process and so on, and demonstrated them on the spot one by one. After repeating this for three or four times, let the employee operate independently. He watched from the side and corrected any mistakes. At each pre-shift meeting, he will also spare

20 minutes to explain the operation precautions and other contents, so that employees can master the operation skills faster and better. During the period of

, Zhao Chunquan's mind was spent on workshop production. He worked overtime during the day and at night. It was normal to work

12 hours a day. Generally, he came to work more than 7 at night. After arranging the workshop in the morning, he went back from work more than 10 . If he encounters equipment failure or production process problems, he can only stay and squint against the back of the chair for a while when he is sleepy. He said that at most, he worked for three days and two nights in a row. Sometimes I get off work on time during the day, and when I have a problem with the night shift, I have to rush back to the workshop in the early morning to deal with it. After the

operator was able to take up his post skillfully, the workshop production was gradually on the right track, but Zhao Chunquan was still busy and just shifted his focus to optimizing the process and improving the production equipment. He will go to various posts to inspect every day, constantly looking for problems, and the improvement of the workshop is also going on. For example, because the equipment in the feeding post is very high and the feeding port is above the equipment, a ladder is needed when feeding, which is not only inconvenient but also has potential safety hazards. Therefore, Zhao Chunquan arranged personnel to add an operating platform to these processes, which is convenient for handling and safer. The on-line monitoring of alcohol agent in production has not been very stable. After a period of observation, Zhao Chunquan found that the reason was the vibration of the equipment, so they carried out technical transformation on the pipeline of the equipment, changing the fixed pipeline at the pipeline connection into a hose, reducing the vibration caused by the operation of the equipment, and the monitoring data were stable. The plant extraction workshop has also improved the dust removal facilities, changing the water film dust removal to bag dust removal, which not only improves the product recovery rate, but also reduces the burden of sewage treatment.

Zhao Chunquan said that busyness has become the norm at work. At the beginning, his family would complain. He was also distressed about it, but after a long time, his family understood. Looking at the smooth production of batches of products, he felt that his hard work was worth it, and he was very at ease. (Reporter Ni Yingzhen)

More information

Representatives of the 20th Congress preached the 20th Congress at the peak.

On the afternoon of November 11, a special lecture on the spirit of the Party's 20th Congress was held in the conference room of the Peak Building. Yang Xiayun, a representative of the 20th National Congress, walked into the peak and preached his understanding of the spirit of the 20th National Congress for Party members through personal experience.

2022

11-23

The group party committee organizes and learns the twenty spirits.

On the afternoon of October 28, the party Committee of the group organized all members to hold a special study meeting to earnestly study and understand the communique of the first plenary session of the 20th central Committee of the communist party of China and the revision of the party constitution. Jiang Xiaomeng, Secretary of the Party committee of the group, stressed at the study meeting that the 20th National Congress of the Communist Party of China has drawn a grand blueprint for building a socialist modern country in an all-round way, opened a new chapter in the era of national development, and pointed out the direction for the future development of enterprises. Party organizations at all levels of the group should pay full attention to and earnestly implement it, actively organize party members and cadres to learn the spirit of the spirit of the 20th National Congress, And to guide the future work practice.

2022

11-01

Spike Party Members and Cadres Watch the Opening Meeting of the 20th Congress

At 10 a.m. on October 16, the 20th National Congress of the Communist Party of China was solemnly opened in the Great Hall of the People in Beijing. Xi Jinping delivered a report to the Party's 20th National Congress on behalf of the 19th Central Committee. The group company attaches great importance to and carefully deploys, and organizes all party members and management backbones of the group headquarters and subsidiaries to watch the live broadcast of the opening meeting through the Internet, TV and other methods.

2022

10-23

Provincial torchbearers, there are two spikes!

2022

10-08

Jiang Xiaomeng was hired as the "Shuanglong Escort" entrepreneurial mentor.

On September 16, Jiang Xiaomeng, Secretary of the Party committee and chairman of the group company, was employed as the entrepreneurial mentor of "Shuanglong escort" at the launching ceremony of the special action of "Shuanglong escort steady progress and quality improvement" held in Jinhua City and the promotion meeting of innovative products of key talent enterprises in Jinhua City.

2022

09-27

The 12th Congress of Zhejiang Federation of Industry and Commerce Held in Hangzhou Chairman Jiang Xiaomeng Re-elected Vice President of Provincial Chamber of Commerce

From August 18th to 19th, the 12th Congress of the Zhejiang Federation of Industry and Commerce was held in Hangzhou, and the 12th leadership of the Provincial Federation of Industry and Commerce was elected. Jiang Xiaomeng, Secretary of the Party Committee and Chairman of the Group, was re-elected as Vice President of Zhejiang Chamber of Commerce.

2022

09-01

< 1...3 4 5...61 > 跳转到页