News Center

Home page

Peak Report

News reports

Behind the Luck.

Release time:

2020-08-14

"Luck"

Artificial Bezoar Workshop Reconstruction Documentary

After four months of intense work, 8# September 9 , the artificial bezoar technical renovation project of Qiubin Factory was successfully completed, 8 18 , 19 , 20 , the trial production of the first three batches of products was successfully completed. Yi Shengrong, director of the Akihama Factory, lamented, "We are lucky this time".

Good luck, this is of course a joke. To do such a big project well, luck alone is of course not enough. What really plays a decisive role is the seriousness and hard work of the project team members.

Pharmaceutical Company has many years of successful experience in producing artificial bezoar, but from the beginning of the project transformation, due to the use of raw materials, production process, process standards, and production scale are almost different, so the previous experience is not for them. Help, can only be explored from scratch through the efforts of participating construction personnel. From the beginning of the

project, the project team was formed by Yi Shengrong, director of Qiubin Factory, Yu Chengfeng, production technology department, Yan Xixia, workshop director, Fang Weiming, mechanic, and Tang Songnian, electrician. While ensuring normal production, the project began to transform. The civil engineering project of workshop

started in March 4 . The project team members divided their work according to their own fields. Fang Weiming and Tang Songnian, who were responsible for equipment selection, went to many equipment manufacturers to understand relevant information, make comparisons and prepare for bidding. Compared with the previous production, the requirements for environmental protection are higher now. When designing the artificial bezoar workshop, it was decided to adopt dust-free transportation. All equipment is connected through pipelines. In order to meet this requirement, most equipment must be customized from the manufacturer. Before the formal bidding of the equipment, the project team also held a special meeting to brainstorm and put forward opinions and suggestions on equipment selection according to the collected information and their own work experience. It has been suggested that corn starch is one of the main raw materials for the production of artificial bezoar. A lot of heat will be generated during the ball milling process. If the temperature is too high, the starch will stick together and affect the quality of the product. Although there is no requirement for this in the process standard, it can be related to the quality of the product, so when selecting the equipment, the equipment manufacturer is required to increase the cooling system for the heat dissipation problem of the ball mill. Fang Weiming said that it takes three months for general equipment manufacturers to obtain orders and provide products, but we only have more than one month, and the equipment is not stereotyped, so the two sides have communicated repeatedly many times.

Despite this, there were still some small "episodes" in the acceptance stage before the equipment entered the site ". There is a gap between the inlet and outlet of the equipment and the previous requirements, which will cause waste of raw materials. But because the construction period is very tight, the time nodes of each link are very close, if you can not enter the site on time, the whole project will be affected. This can be anxious for the project team. After communication and arrangement, it was finally decided to give the equipment manufacturer a week to revise it. After meeting the required requirements, the equipment was pulled over quickly. Other minor problems can only be to let the equipment manufacturer personnel come over and make on-site modifications.

In the trial production stage, in order to save costs, Qiubin Factory decided that the batch of products is 100 kg, while the design capacity of the equipment is 500 kg. There is no data that can be directly referred to for the process parameters such as ball mill speed, ball milling time and ball quantity. Before the trial, the members of the project team also consulted relevant production enterprises, however, the other party has only tried batch 300 kg, and has not succeeded. There are more than ten kinds of trial production schemes involved in the three parameters. Time and cost are not allowed to try multiple schemes. We can only rely on the collection and selection of indirect experience collected by project team members from various channels, and finally confirm the formation of the scheme decided to put into production. The trial production was an unexpected success. All the indexes of the three batches of trial production products passed the test. Moreover, the color, the most difficult index to control for artificial bezoar, was highly recognized by the sales agent.

The implementation of the whole project is relatively smooth, and there may be elements of luck, but behind this "luck", only the participants know how much effort and hardship they have put in. Cleaning the workshop equipment happens to be the hottest time. The weather has been more than 40 degrees for more than half a month, which makes the project team members unable to bear it. The workshop that has just been renovated is very dusty, but in order to ensure the cleaning quality, the air conditioner cannot be turned on, so it can only be cleaned under high temperature. Once out of the workshop, the whole person seems to have been soaked in water, and none of his body is dry. Moreover, his body is covered with dust. If there is something to do in the production workshop, he has to change clothes first.

Yan Xixia was impressed by one thing. The proportion and amount of balls in the ball mill will directly affect the product quality. For this reason, the two employees put 4 alumina balls of different sizes, totaling 2 tons, into small baskets one by one, and poured them into the ball mill with their bare hands for testing. The ball mill is large in size, and the feed port is above the machine. Employees holding the ball have to walk on a platform more than two meters high before they can pour in. If the ratio is not right, it has to be poured out again, cleaned, dried, and then poured in baskets again. This data alone has been tried for 3. four days. It goes up and down dozens of times a day. It is completely a physical job. Sometimes my hands shake after work. And sometimes afraid of miscounting the number of balls, employees squat down directly one by one.

Not only that, during the entire construction period from 4 to 7 February, Yu Chengfeng, Fang Weiming and Tang Songnian did not rest for a day and gave up their holidays. As long as the construction unit was present, they would have to be there. Finally, even the number of overtime days was not counted.

The end of the three batches of trial production products does not mean the end of this technological transformation project. They have a more important task, that is, to apply for GMP certification, and are now preparing for relevant materials. (Reporter Ni Yingzhen)

More information

Jianfeng International Trade Selected as Pilot Enterprise of Non-car Carrier Logistics

In August, Jianfeng International Trading Company successfully passed the evaluation of traffic management departments and expert groups in Zhejiang Province and Jinhua City, and was successfully selected as a pilot enterprise of car-free carrier logistics in Zhejiang Province in 2019. "Car-free transportation" is a new format in the logistics industry brought about by the widespread application of information Internet technology. The "car-free carrier" signs a transportation contract with the shipper as a carrier, assumes the responsibilities and obligations of the carrier, and entrusts the actual carrier to complete the transportation task. Road freight operators. Compared with the traditional concept of logistics mode, car free carrier has the characteristics of strong resource integration ability, wide brand effect and obvious network effect. It is of great significance to promote the intensive integration of resources and the standardized development of the freight market by using Internet means and organizational mode innovation, which is of great significance to promote the transformation and upgrading of the logistics freight industry and improve the quality and efficiency. The planning and construction objectives of the "car-free carrier" platform envisaged by Jianfeng International Trade are: based on the influence of the peak region and the advantages of integrating qualification resources, changing the competition mode, expanding the market coverage and profit pattern, and realizing the transformation and upgrading of traditional businesses, I .e. realizing the "five" operations of PDCA closed-loop operation of supply chain system and marketing marketization, coordination of transportation capacity, customization of services, platform datalization and de-intermediation, we will continue to promote the regional logistics market from low, small, scattered and empty to resource sharing, value sharing and win-win cooperation, and finally build an integrated supply chain service system of "logistics Internet post-market finance. The relevant person in charge of the peak international trade said that the "car-free carrier" pilot qualification, for the peak international trade to change the business model, improve the quality of service.

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

On August 2, Zhengzhou Commodity Exchange issued "on the establishment of a new designated cotton yarn delivery warehouse and the announcement of the water", the peak international trading company officially obtained the Zheng Shang designated delivery warehouse qualification. According to the amendment to the cotton yarn futures business rules announced by Zheng Shang in March, the social warehouse delivery method will be introduced on the basis of retaining the original factory warehouse delivery, and will take the lead in implementing it in Shandong, Henan, Jiangsu and Zhejiang. As one of the eight new warehouse delivery units after the amendment is issued, Jianfeng International Trade can carry out cotton yarn futures delivery business from September 2019. Lanxi City, a subsidiary of Jinhua, is a "famous weaving city in China" and a national textile industry base. It has more than 1000 textile enterprises and an annual demand for cotton yarn of more than 1 million tons. After Jianfeng International Trade obtains the qualification for cotton yarn futures delivery, it can not only provide cotton yarn futures delivery sites for Lanxi cotton textile industry and upstream and downstream merchants, but also effectively serve Jinhua counties and cities, Xiaoshan, Shaoxing, Quzhou, Wenzhou and other places, and other provinces, and Fujian provinces. Since Jianfeng International Trade became a futures delivery warehouse in 2009, it has carried out four types of business of Dalian Commodity Exchange PVC, PE, PP and plywood. Cotton yarn delivery is the company's first business variety in Zhengzhou Commodity Exchange. At present, Jianfeng International Trade is actively organizing learning and training on cotton yarn business knowledge, actively expanding business channels, and understanding the actual needs of upstream and downstream industries to ensure the operation, service quality and delivery efficiency of this new business. (Huang Zhiyu)

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-30

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-22

Peak Pharmaceuticals Ranked "Top 100 Chinese Drugs"

From July 15 to 18, the National Pharmacy Week and China Pharmaceutical Innovation and Development Conference was held in Jinan, Shandong Province. The conference released the "2018 China Pharmaceutical Industry Top 100 Series List". Zhejiang Jianfeng Pharmaceutical Co., Ltd. ranked 74th in the "TOP100 List of Chinese Pharmaceutical Enterprises. The "2018 Top 100 Series List of Chinese Pharmaceutical Industry" is divided into five sub-lists: "TOP100 List of Chinese Pharmaceutical Enterprises", "TOP100 List of Chinese Traditional Medicine Enterprises", "TOP20 List of Chinese CRO (including CDMO) Enterprises", "TOP20 List of Chinese Medical Devices (including IVD) Enterprises" and "TOP20 List of Chinese Biomedicine (including Blood Products, Vaccines, Insulin, etc.) Enterprises. The "chemical pharmaceutical enterprise" in the "TOP100 list of Chinese pharmaceutical enterprises" refers to the enterprises whose terminal sales of chemical drugs account for more than 51% of the total terminal income of the enterprises. The selection score consists of two parts, one is the innovation driving force of the enterprise, that is, the R & D comprehensive index score of R & D investment in 2018, accounting for 40% of the weight; The second is the professional promotion power of the enterprise, that is, the terminal quantitative data determined by the final selection needs of clinicians and patients in 2018, accounting for 60% of the weight; the objects participating in the selection are pharmaceutical industry enterprises registered in China (excluding subsidiaries of multinational pharmaceutical enterprises in China) and whose main business is pharmaceutical manufacturing. The convening of the conference and the release of the list have received widespread attention from the industry. Relevant leaders of the state and Shandong Province attended the meeting, chief scientist of Peak Pharmaceutical, Chinese Academy of Engineering

2020

07-31

< 1...29 30 31...61 > 跳转到页