Behind the Luck.
Release time:
2020-08-14
"Luck"
Artificial Bezoar Workshop Reconstruction Documentary
After four months of intense work, 8# September 9 , the artificial bezoar technical renovation project of Qiubin Factory was successfully completed, 8 18 , 19 , 20 , the trial production of the first three batches of products was successfully completed. Yi Shengrong, director of the Akihama Factory, lamented, "We are lucky this time".
Good luck, this is of course a joke. To do such a big project well, luck alone is of course not enough. What really plays a decisive role is the seriousness and hard work of the project team members.
Pharmaceutical Company has many years of successful experience in producing artificial bezoar, but from the beginning of the project transformation, due to the use of raw materials, production process, process standards, and production scale are almost different, so the previous experience is not for them. Help, can only be explored from scratch through the efforts of participating construction personnel. From the beginning of the
project, the project team was formed by Yi Shengrong, director of Qiubin Factory, Yu Chengfeng, production technology department, Yan Xixia, workshop director, Fang Weiming, mechanic, and Tang Songnian, electrician. While ensuring normal production, the project began to transform. The civil engineering project of workshop
started in March 4 . The project team members divided their work according to their own fields. Fang Weiming and Tang Songnian, who were responsible for equipment selection, went to many equipment manufacturers to understand relevant information, make comparisons and prepare for bidding. Compared with the previous production, the requirements for environmental protection are higher now. When designing the artificial bezoar workshop, it was decided to adopt dust-free transportation. All equipment is connected through pipelines. In order to meet this requirement, most equipment must be customized from the manufacturer. Before the formal bidding of the equipment, the project team also held a special meeting to brainstorm and put forward opinions and suggestions on equipment selection according to the collected information and their own work experience. It has been suggested that corn starch is one of the main raw materials for the production of artificial bezoar. A lot of heat will be generated during the ball milling process. If the temperature is too high, the starch will stick together and affect the quality of the product. Although there is no requirement for this in the process standard, it can be related to the quality of the product, so when selecting the equipment, the equipment manufacturer is required to increase the cooling system for the heat dissipation problem of the ball mill. Fang Weiming said that it takes three months for general equipment manufacturers to obtain orders and provide products, but we only have more than one month, and the equipment is not stereotyped, so the two sides have communicated repeatedly many times.
Despite this, there were still some small "episodes" in the acceptance stage before the equipment entered the site ". There is a gap between the inlet and outlet of the equipment and the previous requirements, which will cause waste of raw materials. But because the construction period is very tight, the time nodes of each link are very close, if you can not enter the site on time, the whole project will be affected. This can be anxious for the project team. After communication and arrangement, it was finally decided to give the equipment manufacturer a week to revise it. After meeting the required requirements, the equipment was pulled over quickly. Other minor problems can only be to let the equipment manufacturer personnel come over and make on-site modifications.
In the trial production stage, in order to save costs, Qiubin Factory decided that the batch of products is 100 kg, while the design capacity of the equipment is 500 kg. There is no data that can be directly referred to for the process parameters such as ball mill speed, ball milling time and ball quantity. Before the trial, the members of the project team also consulted relevant production enterprises, however, the other party has only tried batch 300 kg, and has not succeeded. There are more than ten kinds of trial production schemes involved in the three parameters. Time and cost are not allowed to try multiple schemes. We can only rely on the collection and selection of indirect experience collected by project team members from various channels, and finally confirm the formation of the scheme decided to put into production. The trial production was an unexpected success. All the indexes of the three batches of trial production products passed the test. Moreover, the color, the most difficult index to control for artificial bezoar, was highly recognized by the sales agent.
The implementation of the whole project is relatively smooth, and there may be elements of luck, but behind this "luck", only the participants know how much effort and hardship they have put in. Cleaning the workshop equipment happens to be the hottest time. The weather has been more than 40 degrees for more than half a month, which makes the project team members unable to bear it. The workshop that has just been renovated is very dusty, but in order to ensure the cleaning quality, the air conditioner cannot be turned on, so it can only be cleaned under high temperature. Once out of the workshop, the whole person seems to have been soaked in water, and none of his body is dry. Moreover, his body is covered with dust. If there is something to do in the production workshop, he has to change clothes first.
Yan Xixia was impressed by one thing. The proportion and amount of balls in the ball mill will directly affect the product quality. For this reason, the two employees put 4 alumina balls of different sizes, totaling 2 tons, into small baskets one by one, and poured them into the ball mill with their bare hands for testing. The ball mill is large in size, and the feed port is above the machine. Employees holding the ball have to walk on a platform more than two meters high before they can pour in. If the ratio is not right, it has to be poured out again, cleaned, dried, and then poured in baskets again. This data alone has been tried for 3. four days. It goes up and down dozens of times a day. It is completely a physical job. Sometimes my hands shake after work. And sometimes afraid of miscounting the number of balls, employees squat down directly one by one.
Not only that, during the entire construction period from 4 to 7 February, Yu Chengfeng, Fang Weiming and Tang Songnian did not rest for a day and gave up their holidays. As long as the construction unit was present, they would have to be there. Finally, even the number of overtime days was not counted.
The end of the three batches of trial production products does not mean the end of this technological transformation project. They have a more important task, that is, to apply for GMP certification, and are now preparing for relevant materials. (Reporter Ni Yingzhen)
More information
Daye Peak Opens "Standard Year"
After the 2019 overhaul ended in early March, Daye Jianfeng Cement Company immediately launched the "Standard Year" activity to carry out standardized rectification in view of a series of defects and problems in the daily management process. The goal of the "Standard Year" activity is to target specific issues that affect employees' work efficiency and safe and environmentally friendly production. Through the formulation of institutionalized work standards, further standardize employees' various operations, improve operational efficiency, and improve grassroots management execution, so as to achieve The purpose of improving the company's image, reducing costs, improving efficiency, and increasing benefits. In order to ensure the smooth progress of the activities, daye peak has set up a promotion team headed by general manager Zhang fengliang to be responsible for the overall promotion of the "standard year" activities, mainly including revising the activity plan, summarizing the standardized implementation standards of various departments, implementing the plan, supervising the implementation progress, evaluating the implementation effect, collecting suggestions and opinions in the implementation process, etc. Based on the foundation, aiming at the details and solving problems is a major feature of Daye peak's "standard year" activity. For example, the "Flange Sealing Operation Standard", which is currently being tried out, not only puts forward standardization requirements for such a "trivial matter" in equipment management as flange sealing, but also attaches "model" photos to make it clear to mechanics What should be done and what should be done. However, this "small standard" aims at three problems: leakage at the production site, extensive mechanic work and waste of materials. Once it becomes the behavior habit of employees, the hygiene and cost control at the production site are bound to be improved. It is understood that Daye peak "standard year" activities plan to continue for three years to promote, activities
2020
07-30
Shanghai North Carolina Jointly Builds Dongto Pharmaceutical Ecological Circle
News from our newspaper On the afternoon of March 26, the "2019 Dongzhi Pharmaceutical Industry Development Forum" co-sponsored by the Pharmaceutical Finance Circle and Shanghai Beika Pharmaceutical Technology Co., Ltd. was held in Dongzhi County, Anhui Province. More than 40 pharmaceutical industry entrepreneurs gathered together., To provide advice and suggestions for the future development of the pharmaceutical industry in Dongzhi County. At present, the pharmaceutical finance circle is an industry organization with certain influence in the field of biomedicine in China. It brings together high-end pharmaceutical industry elites and biomedical enterprises, and is committed to building a pharmaceutical industry ecosystem. With the concept of "co construction, co creation, win-win and sharing", it solves the common key problems of projects, capital and talents in the development of biomedicine, and forms a new ecology in the field of enterprise services. "2019 Dongzhi Pharmaceutical Industry Development Forum" is an important part of the "Anhui Business Investigation Tour" organized by Shanghai Beika and Pharmaceutical Finance Circle. On the morning of the 26th, the delegation visited New North Card Chemical, Zhongwang Pharmaceutical and other enterprises. Lou Xiaohua, executive deputy general manager of North Carolina Company, introduced the current development status of the company, the complete equipment and facilities and standardized management of the two companies, and the business philosophy of technological innovation as the core and "concentration, conscience, and anti-tumor leader" as its own responsibility. It was unanimously affirmed by the members of the delegation. Before the official start of the forum, Huang Jinlong, deputy general manager of the group company and general manager of Jianfeng Pharmaceutical, delivered a speech on behalf of Jianfeng Group, expressing gratitude to the county party committee and county government for the support of the "Dongzhi Pharmaceutical Development Forum" and to all the entrepreneurs who attended the meeting. Welcome, and give a brief introduction to why Jianfeng Group chose to invest in Dongzhi, and invite all colleagues to join in the development of Dongzhi medicine. In academic exchanges,
2020
07-31
Daye Peak Opens "Standard Year"
After the 2019 overhaul ended in early March, Daye Jianfeng Cement Company immediately launched the "Standard Year" activity to carry out standardized rectification in view of a series of defects and problems in the daily management process. The goal of the "Standard Year" activity is to target specific issues that affect employees' work efficiency and safe and environmentally friendly production. Through the formulation of institutionalized work standards, further standardize employees' various operations, improve operational efficiency, and improve grassroots management execution, so as to achieve The purpose of improving the company's image, reducing costs, improving efficiency, and increasing benefits. In order to ensure the smooth progress of the activities, daye peak has set up a promotion team headed by general manager Zhang fengliang to be responsible for the overall promotion of the "standard year" activities, mainly including revising the activity plan, summarizing the standardized implementation standards of various departments, implementing the plan, supervising the implementation progress, evaluating the implementation effect, collecting suggestions and opinions in the implementation process, etc. Based on the foundation, aiming at the details and solving problems is a major feature of Daye peak's "standard year" activity. For example, the "Flange Sealing Operation Standard", which is currently being tried out, not only puts forward standardization requirements for such a "trivial matter" in equipment management as flange sealing, but also attaches "model" photos to make it clear to mechanics What should be done and what should be done. However, this "small standard" aims at three problems: leakage at the production site, extensive mechanic work and waste of materials. Once it becomes the behavior habit of employees, the hygiene and cost control at the production site are bound to be improved. It is understood that Daye peak "standard year" activities plan to continue for three years to promote, activities
2020
07-31
Guizhou Huangping Cement Project Started
The expansion of the peak cement industry has taken substantial steps. A few days ago, the opening ceremony of the peak Guizhou Huangping cement project was held in Gulong Town, Huangping County. Huangping County is located in the southeast of Guizhou Province and the northwest of Qiandongnan Miao and Dong Autonomous Prefecture. It is rich in barite, limestone, gypsum, bauxite, mercury and other mineral resources. At the end of 2018, the board of directors of the group company passed the proposal to acquire all the shares of Guizhou Mingchuan company. After the acquisition is completed, Mingchuan Company will become a wholly-owned subsidiary of Jianfeng and will continue to invest about 0.65 billion yuan to build a new dry cement production line with a daily output of 4500 tons of cement clinker in an off-site technological transformation project (with waste heat power generation). On February 28, 2019, the Company and the former shareholders of Mingchuan completed the relevant asset transfer, equity transfer and industrial and commercial change registration procedures. Before the Spring Festival, the preparatory team with Hu Hongwei as the team leader and Lu Hongzheng as the deputy team leader has been stationed at the project site to carry out a series of preparatory work. The Huangping cement project is an important measure to strengthen the development of the company's main business according to the company's strategic policy of "strengthening the main business through cooperation and innovation, standardizing science and seeking development. The construction of the project will strictly follow the requirements of new industrialization, adopt advanced new dry-process rotary kiln production technology and industrial waste slag comprehensive utilization technology, which will not only bring economic and social benefits to the local area, but also further expand the scale of peak cement business. Become a new profit growth point of the company. Yu Jianhong, general manager of the group company, Huang Jinlong, deputy general manager, Zhu Jianwei, secretary of the board of directors, personnel of the preparation team of Huangping cement project, relevant leaders of Huangping County and Gulong Town, and person in charge of the project construction unit participated in the construction.
2020
07-31
Company fully deploys 2019 work
On January 28, the group company held a business analysis meeting to review and summarize the work situation in 2018, arrange and deploy the work for the new year, and put forward work requirements. At the meeting, various professional companies and directly affiliated enterprises made reports on the overall work situation in 2018, focusing on analyzing the existing problems and deficiencies, and proposing corresponding solutions and work plans for 2019. Xiang Chongping, deputy general manager of the group company, made a systematic review of the current human resources efficiency and human resources development of the company. Chen Tianci, chairman of the board of supervisors, made a report and analysis on the internal control, safety and environmental protection work in 2018. Lan Xiaolong, head of finance, analyzed the risks and challenges currently faced by the company according to the operating data and financial situation of its subordinate enterprises. The functional departments and offices of the headquarters also made a brief report on their annual work. Yu Jianhong, general manager of the group company, made a comprehensive review of the company's operation in 2018 and made a comparative analysis of the main economic indicators of each industrial sector. In 2018, the operating indicators of the company's various industrial sectors have improved significantly year-on-year, and the group company has also created the best operating performance in history. All units have completed the formulation of the second round of "three-year business plan", which points out the direction for the next three years of business work; the group company has also completed the first draft of the new "five-year strategic development plan", which is being revised and enriched. In addition, the two main businesses have also made substantial progress in investment expansion and industrial integration around strategic objectives, and the operating costs of major enterprises have decreased to varying degrees; the optimization of organizational structure and post setting has achieved new results, and management efficiency and people
2020
07-31
Company fully deploys 2019 work
On January 28, the group company held a business analysis meeting to review and summarize the work situation in 2018, arrange and deploy the work for the new year, and put forward work requirements. At the meeting, various professional companies and directly affiliated enterprises made reports on the overall work situation in 2018, focusing on analyzing the existing problems and deficiencies, and proposing corresponding solutions and work plans for 2019. Xiang Chongping, deputy general manager of the group company, made a systematic review of the current human resources efficiency and human resources development of the company. Chen Tianci, chairman of the board of supervisors, made a report and analysis on the internal control, safety and environmental protection work in 2018. Lan Xiaolong, head of finance, analyzed the risks and challenges currently faced by the company according to the operating data and financial situation of its subordinate enterprises. The functional departments and offices of the headquarters also made a brief report on their annual work. Yu Jianhong, general manager of the group company, made a comprehensive review of the company's operation in 2018 and made a comparative analysis of the main economic indicators of each industrial sector. In 2018, the operating indicators of the company's various industrial sectors have improved significantly year-on-year, and the group company has also created the best operating performance in history. All units have completed the formulation of the second round of "three-year business plan", which points out the direction for the next three years of business work; the group company has also completed the first draft of the new "five-year strategic development plan", which is being revised and enriched. In addition, the two main businesses have also made substantial progress in investment expansion and industrial integration around strategic objectives, and the operating costs of major enterprises have decreased to varying degrees; the optimization of organizational structure and post setting has achieved new results, and management efficiency and people
2020
07-30
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page