Daye Peak Two Reformation Show Effective Results
Release time:
2020-08-14
Daye Peak Two Retrofits Show Effective
News Daye Peak Cement Company carried out grate cooler frame reinforcement and kiln tail fan energy-saving renovation during the Spring Festival overhaul. Although there is only a short period of more than two months of actual operation, it has already produced obvious results. The
Daye Peak Grate Cooler was originally designed to match the production capacity of tons of cement clinker per day. Due to the heavy production tasks in recent years, some parts of the Grate Cooler were damaged due to overload work, which had to be shut down urgently. For this reason, during the overhaul of Daye Peak, the movable frame, inner support wheel support beam, support wheel support, clamping device, support pipe beam and other important components of each section of the grate cooler were unified and strengthened to meet the new operation requirements of the production line.
According to introduction, if the downtime of the kiln system caused by the grate cooler failure is reduced by 75 hours, it is equivalent to recovering the cost of this renovation. Two months after the end of the transformation, the grate cooler has been running smoothly and reliably. After inspection and confirmation during shutdown of 4 months, all components are in normal operation. After the failure rate of grate cooler is reduced, it will not only greatly reduce the workload of employees, but also reduce the labor and material costs when overhauling the grate cooler, and will also play a positive role in promoting the implementation of the "large inspection system.
Daye peak high temperature fan since the establishment of the factory is a conventional centrifugal fan, is the use of high-frequency chopper speed control. With the increase of kiln output, the fan shows some disadvantages. It cannot adjust the speed according to the requirements of the process. The maximum speed can only be controlled at about 850 revolutions per minute. The air volume can only be pulled at full speed by the tail row, resulting in the loss of the tail row's own energy. For this reason, Daye Peak decided to carry out high-efficiency and energy-saving technological transformation of high-temperature fans. According to the plan, the energy-saving transformation of the kiln tail high-temperature fan will be divided into two steps, which will be implemented during the overhaul and medium repair respectively. The first step is to replace the original conventional fan with a high-efficiency and energy-saving centrifugal fan, and the second step is to change the motor control from the original high-frequency chopper control to high-voltage variable frequency speed control.
During the Spring Festival overhaul, the energy-saving transformation of the high-temperature fan successfully completed the first step. Compared with the data of the same period in 2016 , although the power consumption of the high-temperature fan itself has not changed significantly, the power consumption of the tail exhaust fan per ton of clinker is reduced by about 1.3 kW hours, which can save more than ,150 yuan per year, and the renovation cost can be recovered in less than one year. If the second step of transformation is continued during the medium repair period, the energy consumption of the tail exhaust will be further reduced, and the energy consumption of the high-temperature fan itself will also decrease. It is expected that the technical transformation cost will be recovered in two to three years. This transformation not only achieves the expected effect, but also further reduces the production cost and improves the market competitiveness of peak cement. (Du Yuwen Shi Zhangliang)
More information
The company won the Taurus Award
On December 29, 2022, the "2022 High-quality Development Forum of listed companies and the 24th Golden Bull Award presentation ceremony of listed companies" jointly sponsored by China Securities News, Haikou Municipal Government and Haikou National High-tech Zone was held in Haikou. The list of Golden Bull Awards of listed companies was officially announced. With its outstanding performance, Jianfeng Group won the "2021 Golden Bull Most Investment Value Award".
2023
01-12
From December 11th to 12th, the 13th National Congress of the All-China Federation of Industry and Commerce was held in Beijing. Jiang Xiaomeng, chairman of the group company, attended the conference as a representative of Zhejiang.
2022
12-22
Yunnan Jianfeng won the title of "Harmonious Labor Relations Enterprise" in Yunnan Province
On November 18, the Yunnan Provincial Federation of Trade Unions, the Department of Human Resources and Social Security, the Entrepreneur Association and other units jointly issued a document to commend the harmonious labor relations enterprises in Yunnan Province from 2020 to 2021. Yunnan Jianfeng Cement Company is on the list and is the only enterprise in the urban area of Pu'er to receive this honor.
2022
12-13
Huang Ping Jianfeng won the title of "provincial green factory" in Guizhou
On November 30, the Guizhou Provincial Department of Industry and Information Technology released the 2022 list of green manufacturing units in Guizhou Province, and Huangping Jianfeng Cement Company was recognized as a "provincial green factory".
2022
12-13
On December 2, Yu Jianhong, general manager of the group company, gave a management lesson to the company's reserve management talents under the title of "Enterprise Management Innovation in Great Changes.
2022
12-13
On November 24, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special party lesson to all party members and cadres of the company under the title of "comprehensively promoting the Great Rejuvenation of the Chinese Nation with Chinese Modernization" to interpret and preach the spirit of the 20th CPC National Congress.
2022
12-04