Daye Peak Two Reformation Show Effective Results
Release time:
2020-08-14
Daye Peak Two Retrofits Show Effective
News Daye Peak Cement Company carried out grate cooler frame reinforcement and kiln tail fan energy-saving renovation during the Spring Festival overhaul. Although there is only a short period of more than two months of actual operation, it has already produced obvious results. The
Daye Peak Grate Cooler was originally designed to match the production capacity of tons of cement clinker per day. Due to the heavy production tasks in recent years, some parts of the Grate Cooler were damaged due to overload work, which had to be shut down urgently. For this reason, during the overhaul of Daye Peak, the movable frame, inner support wheel support beam, support wheel support, clamping device, support pipe beam and other important components of each section of the grate cooler were unified and strengthened to meet the new operation requirements of the production line.
According to introduction, if the downtime of the kiln system caused by the grate cooler failure is reduced by 75 hours, it is equivalent to recovering the cost of this renovation. Two months after the end of the transformation, the grate cooler has been running smoothly and reliably. After inspection and confirmation during shutdown of 4 months, all components are in normal operation. After the failure rate of grate cooler is reduced, it will not only greatly reduce the workload of employees, but also reduce the labor and material costs when overhauling the grate cooler, and will also play a positive role in promoting the implementation of the "large inspection system.
Daye peak high temperature fan since the establishment of the factory is a conventional centrifugal fan, is the use of high-frequency chopper speed control. With the increase of kiln output, the fan shows some disadvantages. It cannot adjust the speed according to the requirements of the process. The maximum speed can only be controlled at about 850 revolutions per minute. The air volume can only be pulled at full speed by the tail row, resulting in the loss of the tail row's own energy. For this reason, Daye Peak decided to carry out high-efficiency and energy-saving technological transformation of high-temperature fans. According to the plan, the energy-saving transformation of the kiln tail high-temperature fan will be divided into two steps, which will be implemented during the overhaul and medium repair respectively. The first step is to replace the original conventional fan with a high-efficiency and energy-saving centrifugal fan, and the second step is to change the motor control from the original high-frequency chopper control to high-voltage variable frequency speed control.
During the Spring Festival overhaul, the energy-saving transformation of the high-temperature fan successfully completed the first step. Compared with the data of the same period in 2016 , although the power consumption of the high-temperature fan itself has not changed significantly, the power consumption of the tail exhaust fan per ton of clinker is reduced by about 1.3 kW hours, which can save more than ,150 yuan per year, and the renovation cost can be recovered in less than one year. If the second step of transformation is continued during the medium repair period, the energy consumption of the tail exhaust will be further reduced, and the energy consumption of the high-temperature fan itself will also decrease. It is expected that the technical transformation cost will be recovered in two to three years. This transformation not only achieves the expected effect, but also further reduces the production cost and improves the market competitiveness of peak cement. (Du Yuwen Shi Zhangliang)
More information
Peak re-listed China's top 100 cement production capacity Daye peak won the "smart factory leader"
On July 11-12, the 2022 China Cement Industry Summit and TOP100 Award Ceremony organized by China Cement Network, an authoritative media of China's cement industry, was held in Hangzhou. Jianfeng Group once again ranked among the top 100 cement clinker production capacity in China.
2022
08-04
On the afternoon of July 12, the party Committee of the group company held a special meeting attended by party Committee members, senior and middle-level management backbones, heads of grass-roots party organizations and all party members of the group headquarters to learn and convey the spirit of the 15th party congress of the communist party of China in Zhejiang province.
2022
07-24
On the morning of July 1, more than 40 members of the group's party committee, party members of various branches of the group headquarters, and party members of subordinate enterprise branches went to the Shuanglong Hydropower Station, the Red Education Base of Jinhua City, to receive party spirit and revolutionary tradition education.
2022
07-14
Vocational skill level identification examination!
On June 16 and 18, the theoretical and practical examinations for the determination of professional skill level in the peak pharmaceutical sector were held successively in Jinxi pharmaceutical factory. The independent identification of vocational skill level includes three occupations (types of work): pharmaceutical preparation worker, chemical inspector and organic synthesis worker, basically covering the main posts in the pharmaceutical sector, with a total of 125 employees signing up for the identification.
2022
06-21
On June 16, the Jianfeng Pharmaceutical Quality Research and Development Party Branch and the Jinhua Vocational Skills Management Service Center Party Branch held a signing ceremony in Jinxi Factory to establish a party building alliance.
2022
06-21
Jinhua Mayor Xing Zhihong to Peak Research
On the afternoon of June 1, Jinhua Mayor Xing Zhihong, Wucheng District Party Committee Secretary Gao Feng, District Mayor Hu Yuxian, and heads of the Municipal Economic and Information Bureau, Development and Reform Bureau and other departments went to the group headquarters to discuss and exchange with the leaders of the group company to understand the development of the enterprise. Solicit opinions and suggestions from enterprises on government work. After understanding the current business situation of the peak, Xing Zhihong pointed out that focus, follow the right path, frontier, steady, is the peak to long-term prosperity of the magic weapon, must continue to adhere.
2022
06-13
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page