Daye Peak Two Reformation Show Effective Results
Release time:
2020-08-14
Daye Peak Two Retrofits Show Effective
News Daye Peak Cement Company carried out grate cooler frame reinforcement and kiln tail fan energy-saving renovation during the Spring Festival overhaul. Although there is only a short period of more than two months of actual operation, it has already produced obvious results. The
Daye Peak Grate Cooler was originally designed to match the production capacity of tons of cement clinker per day. Due to the heavy production tasks in recent years, some parts of the Grate Cooler were damaged due to overload work, which had to be shut down urgently. For this reason, during the overhaul of Daye Peak, the movable frame, inner support wheel support beam, support wheel support, clamping device, support pipe beam and other important components of each section of the grate cooler were unified and strengthened to meet the new operation requirements of the production line.
According to introduction, if the downtime of the kiln system caused by the grate cooler failure is reduced by 75 hours, it is equivalent to recovering the cost of this renovation. Two months after the end of the transformation, the grate cooler has been running smoothly and reliably. After inspection and confirmation during shutdown of 4 months, all components are in normal operation. After the failure rate of grate cooler is reduced, it will not only greatly reduce the workload of employees, but also reduce the labor and material costs when overhauling the grate cooler, and will also play a positive role in promoting the implementation of the "large inspection system.
Daye peak high temperature fan since the establishment of the factory is a conventional centrifugal fan, is the use of high-frequency chopper speed control. With the increase of kiln output, the fan shows some disadvantages. It cannot adjust the speed according to the requirements of the process. The maximum speed can only be controlled at about 850 revolutions per minute. The air volume can only be pulled at full speed by the tail row, resulting in the loss of the tail row's own energy. For this reason, Daye Peak decided to carry out high-efficiency and energy-saving technological transformation of high-temperature fans. According to the plan, the energy-saving transformation of the kiln tail high-temperature fan will be divided into two steps, which will be implemented during the overhaul and medium repair respectively. The first step is to replace the original conventional fan with a high-efficiency and energy-saving centrifugal fan, and the second step is to change the motor control from the original high-frequency chopper control to high-voltage variable frequency speed control.
During the Spring Festival overhaul, the energy-saving transformation of the high-temperature fan successfully completed the first step. Compared with the data of the same period in 2016 , although the power consumption of the high-temperature fan itself has not changed significantly, the power consumption of the tail exhaust fan per ton of clinker is reduced by about 1.3 kW hours, which can save more than ,150 yuan per year, and the renovation cost can be recovered in less than one year. If the second step of transformation is continued during the medium repair period, the energy consumption of the tail exhaust will be further reduced, and the energy consumption of the high-temperature fan itself will also decrease. It is expected that the technical transformation cost will be recovered in two to three years. This transformation not only achieves the expected effect, but also further reduces the production cost and improves the market competitiveness of peak cement. (Du Yuwen Shi Zhangliang)
More information
Recently, it was learned from the competent department that the "ERP/MES full-process informatization" project of Jianfeng Pharmaceutical Company has been included in the list of key projects of "integration of industrialization and industrialization" in Jinhua City, and has now entered the publicity period. In order to speed up the in-depth integration of informatization and industrialization, according to the evaluation criteria in Jinhua City's "Several Opinions on Accelerating Informatization Construction" and "Jinhua City Informatization and Industrialization Integration Key Project Management Measures", 148 projects were included in 2017 Jinhua City's "Integration of Industrialization and Industrialization" key projects. The "ERP/MES Full Process Informatization" project of Jianfeng Pharmaceutical Co., Ltd. was finally included in the list after being recommended, material reviewed and expert reviewed by Jinhua Economic and Information Committee. The ERP-level subsystems of ERP/MES full-process informatization project include sales system, procurement system, MRP system, GMPQbD system, connecting UFIDA financial software and HR system. MES-level subsystems include industrial data acquisition and monitoring system, GAMP/MES system, eBPR (electronic batch production record system), cGMP quality assurance system, QC/eBTR(QC process and electronic batch inspection record system), LIMS system, etc. After the construction is completed, the visualization of drug production process and the collection and integration of industrial data will be realized. Realize the electronization of drug production process parameters, electronic batch production and inspection records; the realization of big data integration of industrial data and information will also be in line with the regulatory concept of GMP data integrity and quality traceability to the greatest extent. The establishment of a unified enterprise information platform will eliminate information islands and realize data one.
2020
07-31
The company's first-half profit record high
According to the 15th meeting of the ninth board of directors of the company on August 25, in the first half of 2017, the company achieved a net profit of 240.5357 million yuan, the highest level in half a year's history. In the first half of 2017, the company focused on the general work policy of "grasping trends, precise development, strengthening management, and improving efficiency", grasping the opportunities brought by economic structure optimization and industrial upgrading, strengthening lean production and management improvement internally, and actively exploring externally Develop new opportunities and continue to promote the "three reductions and three improvements" work. Through the joint efforts of all employees of the company, the best semi-annual performance in history has been achieved. As of the end of June 2017, the company's total assets were 4.226 billion yuan and net assets were 2.511 billion yuan; the company achieved total operating income of 1,305.9327 million yuan, an increase of 18.42 percent over the same period last year, and net profit attributable to owners of the parent company was 240.5357 million yuan, an increase of 132.11 percent over the same period last year. Earnings per share are 0.7 yuan. In the second half of the year, the company will continue to focus on the annual business plan, carry out in-depth work of "three reductions and three improvements", further do a good job in internal control, prevent business risks, and further do a good job in safety and environmental protection. we will further develop and improve the complementary relatively diversified main business structure and constantly enhance the company's core competitiveness. The 15th meeting of the 9th board of directors held on August 25 was presided over by Jiang Xiaomeng, chairman of the group company. Four proposals and reports including the 2017 semi annual report and the proposal on the change of the company's accounting policy were deliberated and passed. on the same day, the 12th meeting of the eighth board of supervisors was held,
2020
07-31
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-30
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-31
Spike Pharmaceuticals set out to explore a new sales model
Agency and Terminal Link Production and Chain Cooperation Spike Pharmaceuticals to Explore New Sales Models From August 16 to 21, the 2017 China Pharmaceutical Retail Industry Information Conference (hereinafter referred to as "Xipu Conference") with the theme of "Building a Blueprint-Market Awakening Focusing on Demand" was held in Boao, Hainan. Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, and relevant leaders of Spike Health, pharmaceutical sales company and Spike Pharma pharmacy were invited to attend the event, to create a new sales model "road". This year coincides with the 10th anniversary of the Western Conference. More than 1200 mainstream chain pharmacies, more than 800 brand pharmaceutical industries, more than 100 cross-border affiliated institutions, more than 130 top domestic and foreign capital institutions, more than 60 representatives of authoritative media, and authoritative experts in the industry, with nearly 4000 people gathered in Boao. The meeting combed the context of the pharmaceutical retail industry in the past ten years, discussed the development of the industry in the new decade, and built a new blueprint for the industry. During the meeting, Huang Jinlong led the peak participants to have in-depth exchanges with the organizers of the conference and industry experts on issues such as the impact of national policies such as the brand strategy of enterprises, the role of brand enterprises in the industry, medical reform, prescription outflow, etc. on the original sales mode of pharmaceutical enterprises. He also had extensive contact with pharmaceutical counterparts and terminal chains, listened to front-line sales experience, collected relevant information on terminal chains, and collected market trends of the top 100 chains. In the past ten years, the scale of drug retail sales in China has increased from 143 billion yuan to 337.7 billion yuan, and the chain rate has increased from 35.3 percent to 49.4 percent.
2020
07-31
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-31