Daye Peak Two Reformation Show Effective Results
Release time:
2020-08-14
Daye Peak Two Retrofits Show Effective
News Daye Peak Cement Company carried out grate cooler frame reinforcement and kiln tail fan energy-saving renovation during the Spring Festival overhaul. Although there is only a short period of more than two months of actual operation, it has already produced obvious results. The
Daye Peak Grate Cooler was originally designed to match the production capacity of tons of cement clinker per day. Due to the heavy production tasks in recent years, some parts of the Grate Cooler were damaged due to overload work, which had to be shut down urgently. For this reason, during the overhaul of Daye Peak, the movable frame, inner support wheel support beam, support wheel support, clamping device, support pipe beam and other important components of each section of the grate cooler were unified and strengthened to meet the new operation requirements of the production line.
According to introduction, if the downtime of the kiln system caused by the grate cooler failure is reduced by 75 hours, it is equivalent to recovering the cost of this renovation. Two months after the end of the transformation, the grate cooler has been running smoothly and reliably. After inspection and confirmation during shutdown of 4 months, all components are in normal operation. After the failure rate of grate cooler is reduced, it will not only greatly reduce the workload of employees, but also reduce the labor and material costs when overhauling the grate cooler, and will also play a positive role in promoting the implementation of the "large inspection system.
Daye peak high temperature fan since the establishment of the factory is a conventional centrifugal fan, is the use of high-frequency chopper speed control. With the increase of kiln output, the fan shows some disadvantages. It cannot adjust the speed according to the requirements of the process. The maximum speed can only be controlled at about 850 revolutions per minute. The air volume can only be pulled at full speed by the tail row, resulting in the loss of the tail row's own energy. For this reason, Daye Peak decided to carry out high-efficiency and energy-saving technological transformation of high-temperature fans. According to the plan, the energy-saving transformation of the kiln tail high-temperature fan will be divided into two steps, which will be implemented during the overhaul and medium repair respectively. The first step is to replace the original conventional fan with a high-efficiency and energy-saving centrifugal fan, and the second step is to change the motor control from the original high-frequency chopper control to high-voltage variable frequency speed control.
During the Spring Festival overhaul, the energy-saving transformation of the high-temperature fan successfully completed the first step. Compared with the data of the same period in 2016 , although the power consumption of the high-temperature fan itself has not changed significantly, the power consumption of the tail exhaust fan per ton of clinker is reduced by about 1.3 kW hours, which can save more than ,150 yuan per year, and the renovation cost can be recovered in less than one year. If the second step of transformation is continued during the medium repair period, the energy consumption of the tail exhaust will be further reduced, and the energy consumption of the high-temperature fan itself will also decrease. It is expected that the technical transformation cost will be recovered in two to three years. This transformation not only achieves the expected effect, but also further reduces the production cost and improves the market competitiveness of peak cement. (Du Yuwen Shi Zhangliang)
More information
Peak health marketing and a new "play"
Building a New System, Flattening Management, Spike Health Marketing, New "Way to Work" On February 17, Spike Health Technology Company held a sales meeting to integrate and adjust the construction of a new marketing system and deploy and implement the 2017 sales work. Chen Daiyou, general manager of Health Technology Company, carefully explained and answered the marketing system construction and sales management assessment methods at the meeting, and reached a consensus on unifying thinking. The sales business of Health Technology Company involves three categories: health care products, plant extracts and Chinese herbal pieces. The product attributes and categories are different, and the product sales channels are diversified. In order to facilitate market expansion and adapt to the rapid response to market changes, the Company focuses on key products, key channels and key markets, adjusts the original business model, unifies all sales businesses of the Company, establishes a marketing center, and centralizes and unifies flat management. At the meeting, the Health Technology Company issued the "2017 Sales Management Assessment Measures", which takes sales performance as the leading factor, defines the sales staff's business expenses and market expansion support policies, implements quarterly and annual assessment of sales targets, and directly links the assessment of the progress of sales staff's target tasks with monthly income. After two-way selection, adjustment and implementation of sales positions and target tasks, all sales staff of Health Technology Company have signed a sales economic responsibility system. Chen Daiyou hopes that marketers will build confidence to meet the challenges and grow and progress together with the enterprise. At the same time, he said that the health technology company will focus on strengthening the construction and cultivation of the sales team, and carry out training, learning and experience sharing in various ways, so as to improve the business ability and level of the sales team. (Spike Health)
2020
07-30
2020
07-30
2020
07-31
2020
07-31
On January 23, the group company held a special working meeting to summarize the safety and environmental protection work in 2016 and make arrangements for the work in the new year. General manager Yu Jianhong pointed out at the meeting that hidden dangers are accidents, accidents should be assessed, and safety and environmental protection work should continue to be carried out with a "zero tolerance" attitude. At the meeting, Chen Tianci, assistant to the general manager of the group company and manager of the audit performance management department, summarized the safety and environmental protection work in 2016 from the aspects of the completion of the safety and environmental protection responsibility system objectives, self-examination and self-correction of illegal operations, and the establishment of safety and environmental protection accident-free factories, analyzed the problems existing in the work, and put forward the safety and environmental protection work plan for 2017 in a targeted manner. Jiang Xiaomeng, chairman of the group company, stressed at the meeting that the work of safety and environmental protection is endless and must be carried out unremittingly. All enterprises should focus on safety and environmental protection management in a planned and focused manner according to the characteristics of their respective industries and industries, seasonal changes, and national policy adjustments. It is more important to establish awareness than inspection. It is necessary to strengthen safety and environmental protection education and improve the safety and environmental protection awareness and related work skills of all employees. Conduct in-depth pre-inspection and strict post-assessment to achieve full management and comprehensive prevention, and realize the overall improvement of enterprise safety and environmental protection. At the meeting, Jiang Xiaomeng, on behalf of the group company, signed the 2017 safety and environmental protection work responsibility letter with various professional companies and directly affiliated enterprises. In his concluding speech, Yu Jianhong, general manager of the group company, pointed out that safety runs through the development of the enterprise, and safety and environmental protection cannot be separated from production and operation. The two promote each other and complement each other, and managers at all levels must have a deep level of this.
2020
07-31
"Spike" Cement Becomes Yunnan Famous Brand Product
News from our newspaper At the beginning of the new year, good news came from Yunnan Jianfeng Cement Company. The "Jianfeng" brand cement successfully passed the examination and approval and won the title of "Yunnan Famous Brand Product. Since it was put into production in 2013, the "Jianfeng" brand cement produced by Yunnan Jianfeng has won good sales performance and reputation in the southwest Yunnan market, and its popularity and brand influence have been continuously improved. Therefore, Yunnan Jianfeng started to declare "famous brand products" in 2016. After preliminary data preparation, preliminary examination by Pu'er Municipal Bureau of Quality and Technical Supervision, expert review by Yunnan Provincial Bureau of Quality and Technical Supervision and on-site verification, Yunnan Provincial Bureau of Quality and Technical Supervision finally passed the examination and approval of "Yunnan Famous Brand Products" organized by Yunnan Provincial Strategic Leading Group for Implementing Brand and Strong Quality Province in 2017. The acquisition of this honorary title will further enhance the market competitiveness of Jianfeng Cement in southwestern Yunnan, and also increase the popularity of Yunnan Jianfeng, laying a more solid foundation for further market development in the future. (Li Chun)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page