Daye Peak Two Reformation Show Effective Results
Release time:
2020-08-14
Daye Peak Two Retrofits Show Effective
News Daye Peak Cement Company carried out grate cooler frame reinforcement and kiln tail fan energy-saving renovation during the Spring Festival overhaul. Although there is only a short period of more than two months of actual operation, it has already produced obvious results. The
Daye Peak Grate Cooler was originally designed to match the production capacity of tons of cement clinker per day. Due to the heavy production tasks in recent years, some parts of the Grate Cooler were damaged due to overload work, which had to be shut down urgently. For this reason, during the overhaul of Daye Peak, the movable frame, inner support wheel support beam, support wheel support, clamping device, support pipe beam and other important components of each section of the grate cooler were unified and strengthened to meet the new operation requirements of the production line.
According to introduction, if the downtime of the kiln system caused by the grate cooler failure is reduced by 75 hours, it is equivalent to recovering the cost of this renovation. Two months after the end of the transformation, the grate cooler has been running smoothly and reliably. After inspection and confirmation during shutdown of 4 months, all components are in normal operation. After the failure rate of grate cooler is reduced, it will not only greatly reduce the workload of employees, but also reduce the labor and material costs when overhauling the grate cooler, and will also play a positive role in promoting the implementation of the "large inspection system.
Daye peak high temperature fan since the establishment of the factory is a conventional centrifugal fan, is the use of high-frequency chopper speed control. With the increase of kiln output, the fan shows some disadvantages. It cannot adjust the speed according to the requirements of the process. The maximum speed can only be controlled at about 850 revolutions per minute. The air volume can only be pulled at full speed by the tail row, resulting in the loss of the tail row's own energy. For this reason, Daye Peak decided to carry out high-efficiency and energy-saving technological transformation of high-temperature fans. According to the plan, the energy-saving transformation of the kiln tail high-temperature fan will be divided into two steps, which will be implemented during the overhaul and medium repair respectively. The first step is to replace the original conventional fan with a high-efficiency and energy-saving centrifugal fan, and the second step is to change the motor control from the original high-frequency chopper control to high-voltage variable frequency speed control.
During the Spring Festival overhaul, the energy-saving transformation of the high-temperature fan successfully completed the first step. Compared with the data of the same period in 2016 , although the power consumption of the high-temperature fan itself has not changed significantly, the power consumption of the tail exhaust fan per ton of clinker is reduced by about 1.3 kW hours, which can save more than ,150 yuan per year, and the renovation cost can be recovered in less than one year. If the second step of transformation is continued during the medium repair period, the energy consumption of the tail exhaust will be further reduced, and the energy consumption of the high-temperature fan itself will also decrease. It is expected that the technical transformation cost will be recovered in two to three years. This transformation not only achieves the expected effect, but also further reduces the production cost and improves the market competitiveness of peak cement. (Du Yuwen Shi Zhangliang)
More information
Passion to sing praises to the party
On June 26, the Jinhua United Front "Tongxin · Ode" chorus competition to celebrate the 100 anniversary of the founding of the Communist Party of China was held at the Jinhua Cultural Center Theater. The Jinhua City Federation of Industry and Commerce team, composed mainly of peak employees, won the bronze award for the song "Under the Brilliant Sunshine" in the competition.
2021
07-01
On the morning of July 1, a grand celebration of the 100 anniversary of the founding of the Communist Party of China was held in Tiananmen Square in Beijing. Xi Jinping, General Secretary of the CPC Central Committee, President of the State, and Chairman of the National Military Commission, delivered an important speech. At 8: 00 a.m. in the conference room of the peak building, members of the party Committee of the group company, members of the management team, functional departments and employees of subordinate enterprises working in the peak building were present on time to watch the live broadcast of the celebration. The subordinate enterprises of the company also organized party members and cadres to watch the live broadcast and celebrate the party's centtieth birthday in the form of raising the national flag and reviewing the oath of joining the party.
2021
07-01
Group Party Committee Visits Old Party Members
As the 100 anniversary of the founding of the Communist Party of China approaches, on June 9, the group party committee visited and expressed condolences to old party members and party members in difficulties, and sent them holiday blessings and greetings. The picture shows Qin Xuping, member of the group's party committee and director of the party and mass work department, on behalf of the group's party committee, expressing condolences to Xu Zeng, the first batch of employees and veteran party members of Jinhua cement factory, the predecessor of the peak, when it started its business in 1958.
2021
06-22
"I volunteer to join the Communist Party of China, support the party's program, abide by the party's constitution, fulfill the obligations of party members ......" On the morning of June 6, at the site of the Gutian Conference in Shanghang County, Fujian Province, more than 30 pinnacle party members solemnly raised their right fists facing the party flag to revisit the oath of joining the party. Visiting and studying the red education base and reviewing the oath of joining the party are important contents of the study and education of party history. Yu Jianhong, Qin Xuping and Chen Tianci, members of the group's party committee, party members of various branches of the group's headquarters, and secretaries of grass-roots party organizations under the group's party committee, totaling more than 30 people, visited and studied at the Gutian conference site. Party members visited the Gutian Conference site, the Chairman's Memorial Garden, the Gutian Conference Memorial Hall and other red attractions, and presented flower baskets to the statue of Comrade Mao Zedong. The Gutian Conference was the ninth party congress held by the Fourth Army of the Chinese Workers' and Peasants' Red Army in Gutian Village, Shanghang County, Fujian Province from December 28 to 29, 1929. This meeting summed up the experiences and lessons of army building since the founding of the fourth Red Army, established the principle of the party's absolute leadership over the Red Army, combined Marxism-Leninism with the concrete practice of China's revolutionary struggle, and solved the fundamental problem of how to maintain the party's proletarian vanguard nature and build a new type of people's army by strengthening the party's ideological work. It is of great significance in the history of the development of the Communist Party of China and the Workers' and the Red Army. During the visit and study, the party members visited the display of revolutionary cultural relics, listened to the explanation, got a close understanding of the revolutionary process of building the party and army under difficult conditions, and accepted the spiritual baptism of ideals and beliefs.
2021
06-11
Spike can independently determine the level of professional skills!
A few days ago, after the examination and approval of Jinhua Human Resources and Social Security Bureau, and reported to the Provincial Department of Human Resources and Social Security for examination and record, Zhejiang Jianfeng Group Co., Ltd. was approved to independently identify the level of vocational skills. High-skilled talents are an important part of the enterprise talent team, and they are the backbone to promote technological innovation and promote the transformation of modern scientific and technological achievements into real productivity. Therefore, Jianfeng Group attaches great importance to strengthening the construction of senior technicians, technicians, senior technicians and other talent teams and the training of skilled talents. In recent years, the entire group company has carried out various forms of skills training based on the improvement of employees' job skills. Last year alone, more than 8000 person-times of job skills training were held, which improved employees' professional skills and business capabilities. Under the background of digital and intelligent production, effectively stimulating front-line employees to learn skills and drill business, and cultivating and building a highly skilled workforce is one of the important means to promote the high-quality development of enterprises. At the beginning of the year, the human resources department of the group began to prepare to rely on the national vocational skill identification standards, and formulated the national vocational skill level independent identification scheme of Jianfeng group for the group's two main businesses of cement and pharmaceutical industry. after the comprehensive evaluation of the municipal human resources and social security bureau and Jinhua vocational skill management service center, the group company was agreed to become the independent identification unit of vocational skill level. The success of the application for the independent identification of the vocational skill level of the group company marks the company's skilled talent evaluation work, which has realized the transformation from government-led to the autonomy of employers, combining evaluation with training, use and incentives, and expanding the growth channel of skilled talents. It has laid a good foundation for promoting skill upgrading actions and building knowledge-based, skilled and innovative industrial workers. The positions independently identified by the group company's professional skill level are mainly in the two main businesses of cement and pharmaceutical industry, specifically cement production workers (including cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker, etc.) and pharmaceutical preparation workers. The group is about to carry out the independent identification of vocational skill levels for these two categories of work.
2021
05-21
On April 27, Qiandongnan Prefecture of Guizhou Province held a conference to celebrate the "May 1st" International Labor Day. Huangping Jianfeng Cement Company was awarded the May 1st Labor Certificate of Qiandongnan Prefecture at the conference. Tang Yueqiang, Secretary of the Party Leadership Group and Director of the Standing Committee of the People's Congress of Qiandongnan Prefecture, hoped in his speech that the broad masses of employees in the prefecture will keep in mind the ardent entrustment of General Secretary Xi Jinping, closely focus on the overall situation of the prefecture, consciously shoulder the glorious mission, and vigorously promote the spirit of model workers and labor. The spirit of craftsmanship and the spirit of Guizhou in the new era are striving to be knowledge, skilled and innovative workers in the new era, make new contributions and create new glories in the new journey of building socialist modernization. The conference named and commended the collectives and individuals who won the Qiandongnan May 1st Labor Award, the Worker Pioneer, and the Qiandongnan Craftsman Honors. 40 units including Huang Ping Jianfeng won the Qiandongnan Prefecture May 1st Labor Award. In addition, on the afternoon of May 7, Huangping County, Guizhou Province held the 2021 model worker and advanced worker commendation meeting to commend 11 model workers and 19 advanced workers. Qian Jiang, deputy secretary of the Jianfeng Party branch of Huangping and chairman of the trade union, was awarded the honor of "model worker" in Huangping County. Yang Zhi, deputy secretary of the Huangping County CPC Committee and county magistrate, called on the whole county to vigorously carry forward the spirit of model workers, labor spirit, and craftsmanship, so as to make it a common practice to advocate model workers, learn from model workers, and strive to be model workers, and further gather powerful forces to speed up the high-quality development of Huangping. As a model worker representative, Qian Jiang made an experience exchange speech at the conference.
2021
05-21