The gatekeeper and pioneer of the peak cable quality department of the peak cable.
Release time:
2022-09-27
"The first thing to learn in the introduction of testing is how to strip the cable, and you need to use clever strength ..." The testing monitor Zhu Meixian is demonstrating to the new Sheng Xiaofeng how to strip the cable sheath with scissors and expose the copper core for measuring with instruments. The same scissors and cable, in Zhu Meixian's hand is obedient, the blade on a slide, understatement of the whole outer sheath down. "brush brush " three times five divided by two efforts, hand a 50 pair of cables will be processed, looks very simple. The young and strong Xiao Sheng took the scissors and had to pull it hard to separate the sheath from the copper core. Sometimes he had to pull it several times, and often stuck or pulled the cable with too much force.
Before Xiao Sheng came, the technical quality department of Jianfeng Cable Company could be said to be worthy of the name of "Women's Army " , because the line of dry inspection requires dexterity, care and non-impetuous characteristics. The thin cable is not much thicker than the household needle and thread, so it should be processed and observed. For example, the copper core in the cable is stripped out and carefully observed under strong light near natural light. When turning to a certain angle, the surface of this small copper wire suddenly turns black and there are many patterns, which means that the copper core is scratched by the machine during drawing and has defects in quality.
inspection runs through the whole process of cable production. After each link, it is necessary to timely detect whether all indexes of the product are within the qualified range, and timely adjust if problems occur, that is, as long as the production line is in operation, the inspection personnel will be present. The important link that affects the whole body should be fully examined. The cable company is small in scale and has many kinds of production lines. The technical quality department has only people and few staff. This requires everyone to be versatile and basically master the testing knowledge required for each production link.
Pu Huixian and Zhu Meixian participated in the first professional skills competition for wire and cable manufacturers (inspectors) in Zhejiang Province last year. They won the seventh and eighth places in the group respectively. Zhu Meixian was shortlisted for the National Wire and Cable Inspection Industry Competition and won the winning award, which greatly improved the popularity of cable companies in the industry.
Cable Company attaches great importance to this competition. General Manager Zhang Ci and Technical Quality Manager Lu Chaofang repeatedly encouraged their employees to participate in the competition. Everyone used their time outside work to actively study, arrived at work early, and stayed an extra hour after work. Lu Chaofang gave them many theoretical trainings to make up for the lack of practical experience and theoretical knowledge. By mastering a variety of cable testing skills and studying hard, the members of the technical quality department can win a better place in the competition with fierce competition and many experts and directors.
mentioned this matter, Zhu Meixian called it a pity. This is the first time she has participated in a national competition. She has never had any relevant experience before. She was so nervous that she couldn't sleep repeatedly the night before the final. She tossed and turned from 10 to the early morning in the hotel bed. Since she couldn't sleep, she might as well get up to read and review. It was dawn. Not much sleep a night will affect the performance of the competition, otherwise it is likely to hit the medal. Pu Huixian was also very nervous about participating in the competition. The day before she went to the competition, she said that her foot was twisted and she didn't want to go to the competition. Her colleagues teased her. The competition used her hands and brain, and she didn't need her feet. Pull and drag her to the game.
quality inspection is related to product quality and a company's commercial reputation. it has a great responsibility. however, in actual work, inspectors are wrong "to find fault " in the eyes of other employees, resulting in contradictions. Some of the employees have bad temper, and the inspectors will scold the inspectors when they are listed, thinking that they have found out something wrong, resulting in their performance being deducted. Lu Chaofang can also clearly recall that when several colleagues first arrived at the cable company, some inspectors were new here and had not yet experienced "Laola " , nor did they find out their colleagues' temperament, thin-skinned and scared to cry. Some people want to be conscientious and diligent in their new job, but they can't understand it and cry because they feel wronged. However, they can all adhere to their own principles and distinguish between right and wrong. If the quality is not good, it is not good.
Technical Quality Department is not only responsible for daily testing product indicators, but also responsible for the development of new products and technologies. Whenever the customer's requirements are higher than the old mature production process, it is necessary for the technical quality department to take the lead, communicate with the customer, make a good preliminary plan, and evaluate the realization possibility by matching the performance of the own equipment with the production process one by one. Whenever there are indicators that need to be verified, or customers want to confirm and test requirements, the technical quality department will send the sample production plan to the production department. 2021 They did dozens of water seepage tests and combustion tests. In case of products that the customer has not done and the cable company has also done less, the technical quality department will make specifications. on the one hand, it will confirm the product process to the customer, and on the other hand, it will provide quotation to the salesman. if the structure changes little, it can also guide the production department. last year, it produced more than 180 specifications. If it is a new product with great structural changes, Lu Chaofang will make a quality plan, which specifies the materials, equipment, process and inspection requirements of each process in more detail. During the trial production of new products, due to changes in materials, equipment, and processes, the possibility of problems and failures is high, and the technical quality department needs to track the whole process.
New products cannot be produced in large quantities when they are first launched, which is responsible to the customer and to the cable company itself. Coupled with the additional costs of trial and error, it means that these small orders for new products are usually not profitable and may even lose money. Lu Chaofang said bluntly, "I am a person who dares and is willing to experiment with new products " . Even if the new product means a challenge, it also means that it will bring more workload to the technical quality department. The possibility of failure is high, but if you don't innovate, you can't keep up with the market demand. Lying on "comfort zone " The enterprise that eats the old capital can never move forward. It is easy to make large-scale goods with mature technology and skilled process, but only by making their own characteristics can small-scale cable companies make a breakthrough in the cable industry with billions of output values. Every time a new product is tested, it is a small step in the accumulation of technology and experience. It is a silent deep cultivation in the field of innovation. After a few months or even a year or two, the seeds sown before will germinate and bear Rich results. In 2020 , the cable company passed the acceptance of 1 provincial industrial new products and 1 Wucheng District science and technology plan. 2021 passed the project of 2 provincial industrial new products and 1 Wucheng district science and technology plan. At most, I experimented with 12 new products in a month. Although the members of the technical quality department worked hard, they enjoyed it. (Reporter Chen Shengmu)
More information
July 1 is the anniversary of the founding of the Communist Party of China. The party committee of the group organized the party members of the group headquarters and the heads of the grassroots party organizations to go to Jinggangshan, the red holy land, to retake the revolutionary road taken by the ancestors and review the history of revolutionary struggle.
2023
07-11
The Party Committee of the Group organized a thematic education seminar to study
On June 27, the Party Committee of the Group Company organized an education seminar on the theme of studying and implementing Xi Jinping's thoughts on socialism with Chinese characteristics in the new era. Jiang Xinwang, a professor and master tutor of Zhejiang Normal University, explained the deployment requirements of economic work and Xi Jinping's economic thoughts in the report of the 20th National Congress of the Communist Party of China with the theme of "accelerating the construction of a new development pattern and promoting high-quality development.
2023
07-11
Jianfeng Pharmaceutical rehired Academician Wang Guangji as Chief Scientist
On April 30, Jiang Xiaomeng, chairman of the group company and chairman of Jianfeng Pharmaceutical Company, on behalf of Jianfeng Pharmaceutical Company, issued a letter of appointment to Professor Wang Guangji, academician of the Chinese Academy of Engineering, and renewed him as the chief scientist of the pharmaceutical company.
2023
05-11
Jinhua Development Conference and Wucheng Development Conference
On April 30 and May 1, the third Jinhua Development Conference and the second Wucheng Development Conference opened successively. Jiang Xiaomeng, secretary of the party committee and chairman of the group company, won two major awards at the "Jinhua Development Outstanding Achievement Award" and "Wucheng Development Merit Award" at the two conferences, and participated in the Jinhua Life and Health Industry Summit roundtable and other activities.
2023
05-11
Daye Peak Cement Company, National "Green Factory"!
The Ministry of Industry and Information Technology recently announced the 2022 national green manufacturing list, Daye Peak Cement Company successfully ranked among the national "green factories. Green manufacturing is also known as environmentally conscious manufacturing, that is, in the manufacturing process, a modern manufacturing model that comprehensively considers environmental impact and resource benefits. Its purpose is to use technical means to optimize manufacturing procedures, minimize the impact on the environment (negative effect), and resource utilization The highest rate, and the coordination and optimization of economic and social benefits of enterprises, so as to achieve the purpose of resource conservation and sustainable development. In recent years, with the rapid development of social economy, the state attaches great importance to the construction of ecological civilization and ecological environment protection, and further promoting the construction of green manufacturing system has become an important means to promote high-quality development and maintain green water and green mountains forever. As an important part of the green manufacturing system, the Ministry of Industry and Information Technology has organized and carried out the creation of national-level green factories since 2017, and has conducted nationwide selection. It is an authoritative recognition for companies that meet the "green development" and aims to improve my country's green Manufacturing system, comprehensive implementation of green manufacturing, and help the industrial sector achieve the goal of carbon peak and carbon neutrality, it is an important way to promote the structural optimization of various industries, to get out of trouble and upgrade, and to improve quality and efficiency. Green factory refers to the realization of land intensive, raw materials harmless, clean production, waste resources, energy low-carbon factories. As the production unit of the manufacturing industry, the factory is the main body of the implementation of green manufacturing, which belongs to the core support unit of the green manufacturing system, focusing on the greening of the production process. Over the years, Daye Jianfeng has been adhering to the concept of green and low-carbon development, making every effort to build a garden-style factory. Through formulating plans and subdividing targets, it has clearly defined the total energy consumption and pollutant emission targets, and through carrying out school-enterprise cooperation to promote industry-university-research, it has actively implemented the strategy of "carbon peak and carbon neutrality", invested a huge amount of funds every year for technological transformation, and successively implemented technological transformation projects such as electric bags and low-nitrogen combustion upgrading, take the lead in the application of emission reduction technologies such as wet desulfurization and precise denitrification in the cement industry in Hubei Province, and continue to promote energy conservation, consumption reduction, and emission reduction. After the technical transformation, the company can save 3000 tons of standard coal every year, reduce the intensity of carbon dioxide emissions by 3.6, improve the level of energy-saving and green environmental protection management, and achieve the goal of creating a green factory. Being rated as a national-level green factory is not only a high affirmation and encouragement of Daye Peak's adherence to green, low-carbon and innovative development, but also an opportunity for Daye Peak to further promote green development. The person in charge of Daye Peak said that in accordance with national requirements, local industrial and information authorities should strengthen the connection between the units listed in the green manufacturing list and relevant industrial policies, give full play to the demonstration role of point to area, lead the green transformation of the manufacturing industry in the region, strengthen tracking guidance and dynamic management, and review the key indicators specified in the dynamic management table, Daye Peak will be in the future work, we will continue to further promote the management of environmental protection, energy conservation and emission reduction, give full play to the leading role of green factories in benchmarking, make low-carbon energy conservation, green environmental protection and reduce energy consumption the main keynote of enterprise development, and make continuous efforts to promote the high-quality development of enterprises and local economy. (Junin)
2023
04-03
"Cement Economy 50 People Forum" Jiang Xiaomeng Talk about the Future Development of Cement Industry
On March 14, the "Cement Economy 50 Forum" hosted by China Cement Network was held in Hangzhou, inviting 50 influential economic figures in the cement industry to discuss the future development of China's cement industry. Jiang Xiaomeng, chairman of the group company, was invited to attend the forum to discuss the development of the cement industry with his peers. The theme of this forum is "strengthening confidence, seeking breakthrough, and promoting development". It aims to point out the disadvantages of "mud", actively provide suggestions for the competent departments, enterprise transformation and upgrading, strategic and tactical decision-making in the difficult period of the cement industry, and provide new think tank opinions and methods to help form a new cement economic ecology. In the context of the sharp decline in demand, the cement industry is trapped inside and outside, how to revive the glory? How do cement companies survive and develop next? Around these two topics, the guests at the meeting had a heated discussion. Jiang Xiaomeng pointed out in his speech at the forum that the development of any enterprise is inseparable from the healthy development of the industry. Only when the industry is good can the enterprise be good, and the interests of the industry are greater than the interests of the enterprise. In addition, the competition of similar enterprises should seek a breakthrough from the differentiation, and it is unreasonable to blindly pursue low prices. Industry synergy, industry synergy, supply, demand, price, to find a common price line, on the basis of competition and cooperation, from the management services, cost control and other aspects to highlight the advantages of enterprises. The participants reached consensus on many issues after heated discussions. It is generally believed that 2022 is the most complex year in the cement industry in the past decade, affected by the multi-point spread of the epidemic, real estate downturn and other factors, the cement market demand is sluggish, the contradiction between supply and demand is prominent, prices are falling rapidly, business difficulties, the pace of steady growth of the industry is blocked. Entering 2023, under the macroeconomic situation of stabilizing the economy and promoting development, as well as various regions stepping up efforts to promote the construction of major projects, cement demand is expected to increase in 2023 compared with 2022, and the situation in the second half of the year will be better than that in the first half. However, under the expectation of restorative growth in demand, the cement industry is still facing uncertainties such as continued bottoming of real estate, high energy costs, and overcapacity. In this regard, we should resolutely maintain the normal order of the industry, make concerted efforts to help the industry get out of the predicament, and firmly implement staggered peak production. Through mergers and acquisitions, carbon quotas, energy efficiency indicators, environmental protection indicators, coal indicators, market competition and other means to further resolve the contradiction of overcapacity, optimize the industrial layout, and adhere to innovation-driven in digital, intelligent and green development, so as to promote and finally realize the high-quality development of the cement industry. (this newspaper reporter)
2023
03-21
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page