News Center

Home page

Peak Report

News reports

The gatekeeper and pioneer of the peak cable quality department of the peak cable.

Release time:

2022-09-27

"The first thing to learn in the introduction of testing is how to strip the cable, and you need to use clever strength ..." The testing monitor Zhu Meixian is demonstrating to the new Sheng Xiaofeng how to strip the cable sheath with scissors and expose the copper core for measuring with instruments. The same scissors and cable, in Zhu Meixian's hand is obedient, the blade on a slide, understatement of the whole outer sheath down. "brush brush " three times five divided by two efforts, hand a 50 pair of cables will be processed, looks very simple. The young and strong Xiao Sheng took the scissors and had to pull it hard to separate the sheath from the copper core. Sometimes he had to pull it several times, and often stuck or pulled the cable with too much force.

Before Xiao Sheng came, the technical quality department of Jianfeng Cable Company could be said to be worthy of the name of "Women's Army " , because the line of dry inspection requires dexterity, care and non-impetuous characteristics. The thin cable is not much thicker than the household needle and thread, so it should be processed and observed. For example, the copper core in the cable is stripped out and carefully observed under strong light near natural light. When turning to a certain angle, the surface of this small copper wire suddenly turns black and there are many patterns, which means that the copper core is scratched by the machine during drawing and has defects in quality.

inspection runs through the whole process of cable production. After each link, it is necessary to timely detect whether all indexes of the product are within the qualified range, and timely adjust if problems occur, that is, as long as the production line is in operation, the inspection personnel will be present. The important link that affects the whole body should be fully examined. The cable company is small in scale and has many kinds of production lines. The technical quality department has only people and few staff. This requires everyone to be versatile and basically master the testing knowledge required for each production link.

Pu Huixian and Zhu Meixian participated in the first professional skills competition for wire and cable manufacturers (inspectors) in Zhejiang Province last year. They won the seventh and eighth places in the group respectively. Zhu Meixian was shortlisted for the National Wire and Cable Inspection Industry Competition and won the winning award, which greatly improved the popularity of cable companies in the industry.

Cable Company attaches great importance to this competition. General Manager Zhang Ci and Technical Quality Manager Lu Chaofang repeatedly encouraged their employees to participate in the competition. Everyone used their time outside work to actively study, arrived at work early, and stayed an extra hour after work. Lu Chaofang gave them many theoretical trainings to make up for the lack of practical experience and theoretical knowledge. By mastering a variety of cable testing skills and studying hard, the members of the technical quality department can win a better place in the competition with fierce competition and many experts and directors.

mentioned this matter, Zhu Meixian called it a pity. This is the first time she has participated in a national competition. She has never had any relevant experience before. She was so nervous that she couldn't sleep repeatedly the night before the final. She tossed and turned from 10 to the early morning in the hotel bed. Since she couldn't sleep, she might as well get up to read and review. It was dawn. Not much sleep a night will affect the performance of the competition, otherwise it is likely to hit the medal. Pu Huixian was also very nervous about participating in the competition. The day before she went to the competition, she said that her foot was twisted and she didn't want to go to the competition. Her colleagues teased her. The competition used her hands and brain, and she didn't need her feet. Pull and drag her to the game.

quality inspection is related to product quality and a company's commercial reputation. it has a great responsibility. however, in actual work, inspectors are wrong "to find fault " in the eyes of other employees, resulting in contradictions. Some of the employees have bad temper, and the inspectors will scold the inspectors when they are listed, thinking that they have found out something wrong, resulting in their performance being deducted. Lu Chaofang can also clearly recall that when several colleagues first arrived at the cable company, some inspectors were new here and had not yet experienced "Laola " , nor did they find out their colleagues' temperament, thin-skinned and scared to cry. Some people want to be conscientious and diligent in their new job, but they can't understand it and cry because they feel wronged. However, they can all adhere to their own principles and distinguish between right and wrong. If the quality is not good, it is not good.

Technical Quality Department is not only responsible for daily testing product indicators, but also responsible for the development of new products and technologies. Whenever the customer's requirements are higher than the old mature production process, it is necessary for the technical quality department to take the lead, communicate with the customer, make a good preliminary plan, and evaluate the realization possibility by matching the performance of the own equipment with the production process one by one. Whenever there are indicators that need to be verified, or customers want to confirm and test requirements, the technical quality department will send the sample production plan to the production department. 2021 They did dozens of water seepage tests and combustion tests. In case of products that the customer has not done and the cable company has also done less, the technical quality department will make specifications. on the one hand, it will confirm the product process to the customer, and on the other hand, it will provide quotation to the salesman. if the structure changes little, it can also guide the production department. last year, it produced more than 180 specifications. If it is a new product with great structural changes, Lu Chaofang will make a quality plan, which specifies the materials, equipment, process and inspection requirements of each process in more detail. During the trial production of new products, due to changes in materials, equipment, and processes, the possibility of problems and failures is high, and the technical quality department needs to track the whole process.

New products cannot be produced in large quantities when they are first launched, which is responsible to the customer and to the cable company itself. Coupled with the additional costs of trial and error, it means that these small orders for new products are usually not profitable and may even lose money. Lu Chaofang said bluntly, "I am a person who dares and is willing to experiment with new products " . Even if the new product means a challenge, it also means that it will bring more workload to the technical quality department. The possibility of failure is high, but if you don't innovate, you can't keep up with the market demand. Lying on "comfort zone " The enterprise that eats the old capital can never move forward. It is easy to make large-scale goods with mature technology and skilled process, but only by making their own characteristics can small-scale cable companies make a breakthrough in the cable industry with billions of output values. Every time a new product is tested, it is a small step in the accumulation of technology and experience. It is a silent deep cultivation in the field of innovation. After a few months or even a year or two, the seeds sown before will germinate and bear Rich results. In 2020 , the cable company passed the acceptance of 1 provincial industrial new products and 1 Wucheng District science and technology plan. 2021 passed the project of 2 provincial industrial new products and 1 Wucheng district science and technology plan. At most, I experimented with 12 new products in a month. Although the members of the technical quality department worked hard, they enjoyed it. (Reporter Chen Shengmu)

More information

Peak natural products among the top 20 scientific and technological innovation in TEDA

A few days ago, Tianjin Jianfeng Natural products Research and Development Co., Ltd. stood out among nearly 35000 enterprises in Tianjin Development Zone and won the honor of "Top 20 Scientific and technological Innovation Enterprises of 2015. The selection criteria for the top 20 scientific and technological innovation enterprises in Tianjin Economic and Technological Development Zone mainly include: they have won science and technology awards or patent awards in 2015, as well as other awards above the provincial level; they have obtained the qualification certification or approval of research and development institutions above the provincial level; in 2015, the number of invention and utility model patent applications and authorizations was large, totaling more than 15; in 2015, they were supported by national or Tianjin key science and technology plans; scientific research achievements have made significant progress and technology. According to the above standards, Jianfeng Natural Products Company has not only won the second prize of Tianjin Science and Technology Innovation Project Award for the achievements of "Tianjin Plant Waste Reutilization Technology Engineering Center Construction", but also completed the process research of grape seed extract and ginsenoside to pesticide residues, and formulated the international business standard of grape seed extract (grape seed oligomeric proanthocyanidins). In order to better carry out the pilot experiment, large-scale technical transformation was carried out on the second workshop, and the process optimization of extracting anthocyanins from blueberries has been carried out. At the same time, the main business income, operating profit, tax revenue and other economic indicators of peak natural products company in 2015 have increased significantly year-on-year. Relying on the advantages of excellent quality, good efficiency, great contribution, safety and environmental protection, and good social responsibility, Jianfeng Natural Products Company successfully passed the review and became one of the "Top 20 Scientific and Technological Innovation Enterprises in 2015" in Tianjin Development Zone. (

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-30

Peak pharmaceutical "enterprise information construction project" through the acceptance

The "Enterprise Informatization Construction Project" of Jianfeng Pharmaceutical Company was included in the list of key projects of "Integration of Industrialization and Industrialization" (high-level and in-depth combination of informatization and industrialization) in Jinhua City in 2015, and successfully passed the on-site acceptance of the expert group on the morning of May 18. The main contents of the "enterprise information construction project" of the pharmaceutical company include: the tank farm control system, which solves the problem of closed metering and transportation of organic solvents between the tank farm and the production area, can automatically realize the terminal metering setting, and effectively ensure the safety and environmental protection requirements of the tank farm operation; The air conditioning automatic control system realizes the control of the temperature, humidity and room pressure difference in the air conditioning area through the PLC digital-to-analog conversion of the upper computer and lower computer and the terminal actuator regulator, ensure the cleanliness requirements of the production area environment; The online particle monitoring software system automatically adjusts to the standard flow through the upper computer, vacuum system, laser sensor and isodynamic sampling probe, etc. through the flow detector device and key orifice plate inside each sensor, monitors the temperature, humidity, particles, planktonian bacteria, room pressure difference, etc., implements dynamic management, and realizes visual monitoring of the production process environment. MRP production management system, it makes it easier for the warehouse, workshop, and management personnel to obtain information about the flow of materials in the production process, the implementation of production plans, and product inventory. During the on-site acceptance on the 18th, the acceptance team composed of the Information Department of the Municipal Economic and Information Commission, the Economic and Development Bureau of the Development Zone, the Municipal Information Promotion Association and professors of Zhejiang Normal University checked the contracts of each system software, purchase and transfer records, training records, and problem records in project implementation,

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-31

< 1...58 59 60 61 > 跳转到页