The gatekeeper and pioneer of the peak cable quality department of the peak cable.
Release time:
2022-09-27
"The first thing to learn in the introduction of testing is how to strip the cable, and you need to use clever strength ..." The testing monitor Zhu Meixian is demonstrating to the new Sheng Xiaofeng how to strip the cable sheath with scissors and expose the copper core for measuring with instruments. The same scissors and cable, in Zhu Meixian's hand is obedient, the blade on a slide, understatement of the whole outer sheath down. "brush brush " three times five divided by two efforts, hand a 50 pair of cables will be processed, looks very simple. The young and strong Xiao Sheng took the scissors and had to pull it hard to separate the sheath from the copper core. Sometimes he had to pull it several times, and often stuck or pulled the cable with too much force.
Before Xiao Sheng came, the technical quality department of Jianfeng Cable Company could be said to be worthy of the name of "Women's Army " , because the line of dry inspection requires dexterity, care and non-impetuous characteristics. The thin cable is not much thicker than the household needle and thread, so it should be processed and observed. For example, the copper core in the cable is stripped out and carefully observed under strong light near natural light. When turning to a certain angle, the surface of this small copper wire suddenly turns black and there are many patterns, which means that the copper core is scratched by the machine during drawing and has defects in quality.
inspection runs through the whole process of cable production. After each link, it is necessary to timely detect whether all indexes of the product are within the qualified range, and timely adjust if problems occur, that is, as long as the production line is in operation, the inspection personnel will be present. The important link that affects the whole body should be fully examined. The cable company is small in scale and has many kinds of production lines. The technical quality department has only people and few staff. This requires everyone to be versatile and basically master the testing knowledge required for each production link.
Pu Huixian and Zhu Meixian participated in the first professional skills competition for wire and cable manufacturers (inspectors) in Zhejiang Province last year. They won the seventh and eighth places in the group respectively. Zhu Meixian was shortlisted for the National Wire and Cable Inspection Industry Competition and won the winning award, which greatly improved the popularity of cable companies in the industry.
Cable Company attaches great importance to this competition. General Manager Zhang Ci and Technical Quality Manager Lu Chaofang repeatedly encouraged their employees to participate in the competition. Everyone used their time outside work to actively study, arrived at work early, and stayed an extra hour after work. Lu Chaofang gave them many theoretical trainings to make up for the lack of practical experience and theoretical knowledge. By mastering a variety of cable testing skills and studying hard, the members of the technical quality department can win a better place in the competition with fierce competition and many experts and directors.
mentioned this matter, Zhu Meixian called it a pity. This is the first time she has participated in a national competition. She has never had any relevant experience before. She was so nervous that she couldn't sleep repeatedly the night before the final. She tossed and turned from 10 to the early morning in the hotel bed. Since she couldn't sleep, she might as well get up to read and review. It was dawn. Not much sleep a night will affect the performance of the competition, otherwise it is likely to hit the medal. Pu Huixian was also very nervous about participating in the competition. The day before she went to the competition, she said that her foot was twisted and she didn't want to go to the competition. Her colleagues teased her. The competition used her hands and brain, and she didn't need her feet. Pull and drag her to the game.
quality inspection is related to product quality and a company's commercial reputation. it has a great responsibility. however, in actual work, inspectors are wrong "to find fault " in the eyes of other employees, resulting in contradictions. Some of the employees have bad temper, and the inspectors will scold the inspectors when they are listed, thinking that they have found out something wrong, resulting in their performance being deducted. Lu Chaofang can also clearly recall that when several colleagues first arrived at the cable company, some inspectors were new here and had not yet experienced "Laola " , nor did they find out their colleagues' temperament, thin-skinned and scared to cry. Some people want to be conscientious and diligent in their new job, but they can't understand it and cry because they feel wronged. However, they can all adhere to their own principles and distinguish between right and wrong. If the quality is not good, it is not good.
Technical Quality Department is not only responsible for daily testing product indicators, but also responsible for the development of new products and technologies. Whenever the customer's requirements are higher than the old mature production process, it is necessary for the technical quality department to take the lead, communicate with the customer, make a good preliminary plan, and evaluate the realization possibility by matching the performance of the own equipment with the production process one by one. Whenever there are indicators that need to be verified, or customers want to confirm and test requirements, the technical quality department will send the sample production plan to the production department. 2021 They did dozens of water seepage tests and combustion tests. In case of products that the customer has not done and the cable company has also done less, the technical quality department will make specifications. on the one hand, it will confirm the product process to the customer, and on the other hand, it will provide quotation to the salesman. if the structure changes little, it can also guide the production department. last year, it produced more than 180 specifications. If it is a new product with great structural changes, Lu Chaofang will make a quality plan, which specifies the materials, equipment, process and inspection requirements of each process in more detail. During the trial production of new products, due to changes in materials, equipment, and processes, the possibility of problems and failures is high, and the technical quality department needs to track the whole process.
New products cannot be produced in large quantities when they are first launched, which is responsible to the customer and to the cable company itself. Coupled with the additional costs of trial and error, it means that these small orders for new products are usually not profitable and may even lose money. Lu Chaofang said bluntly, "I am a person who dares and is willing to experiment with new products " . Even if the new product means a challenge, it also means that it will bring more workload to the technical quality department. The possibility of failure is high, but if you don't innovate, you can't keep up with the market demand. Lying on "comfort zone " The enterprise that eats the old capital can never move forward. It is easy to make large-scale goods with mature technology and skilled process, but only by making their own characteristics can small-scale cable companies make a breakthrough in the cable industry with billions of output values. Every time a new product is tested, it is a small step in the accumulation of technology and experience. It is a silent deep cultivation in the field of innovation. After a few months or even a year or two, the seeds sown before will germinate and bear Rich results. In 2020 , the cable company passed the acceptance of 1 provincial industrial new products and 1 Wucheng District science and technology plan. 2021 passed the project of 2 provincial industrial new products and 1 Wucheng district science and technology plan. At most, I experimented with 12 new products in a month. Although the members of the technical quality department worked hard, they enjoyed it. (Reporter Chen Shengmu)
More information
Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons
In order to implement the requirements of the higher-level party committee secretary to give in-depth party lectures in enterprises, on July 4, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special lecture on "two studies and one doing" for party members at Yunnan Jianfeng Cement Company. In the lecture, Jiang Xiaomeng started from the background, overall requirements, learning and education content, and main measures of the "two studies and one doing" activities. He hoped that all party members and cadres would understand "awe, gratitude, humility, and decent", and put forward "What should the current enterprise do" and "How should the enterprise go in the future" and other issues. Jiang Xiaomeng analyzed the future development trend of cement and pharmaceutical industries in detail, emphasized the importance of seizing opportunities, and pointed out that with the homogenization of cement industry becoming more and more serious, if we want to take the road of differentiated brand development, the core of competition is to strengthen self management and maximize the cost, so as to improve the competitive advantage. As far as Yunnan Jianfeng is concerned, it is necessary to continuously improve the level of process technology management and increase the hourly output by increasing inspection efforts. Starting from strengthening the control of raw material procurement, the quality and price should be controlled. By strengthening sales management, vigorously develop direct agents, and strive to maximize the profit per ton; By strengthening equipment maintenance, reduce equipment accidents and further reduce the consumption of machine materials; Make good use of people, while constantly tapping talents and cultivating new people, we will gradually control the total number of workers and improve labor productivity. According to the current situation and the company's development strategy, what should the party members of the peak do? Jiang Xiaomeng asked all the party members and cadres of Yunnan peak to play a good vanguard and exemplary role and take the lead in learning new knowledge, new technology and new experience.
2020
07-30
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-30
The Company shall organize special operation safety management training
What kind of management process is needed for the special operation permit? How to manage the ticket of the special operation permit? What are the contents of the eight kinds of special operations?... On June 17, the safety committee of the group company organized a special lecture on safety production to conduct systematic and comprehensive training on the safety management knowledge of special operations. The trainer invited for this training is Ge Zhengliang, head of EHS (Environmental Environment, Health Health, Safety) of Zhejiang Prodbang Pharmaceutical Co., Ltd. He has many years of experience in enterprise safety production management and is also a well-known safety management expert in Jinhua region. He has participated in the enterprise safety and environmental protection inspection organized by Jinhua Safety Supervision Bureau for many times and has a certain understanding of the situation of major enterprises in the peak. In this lecture, Ge Zhengliang divided into four parts: division of special operation license scope, special operation license management process, special operation license ticket management, and eight major types of special operation contents. Combined with relevant laws and regulations and his own practical experience in safety production management, Ge Zhengliang explained in simple terms eight special operation situations such as hot work, hoisting, high place, temporary power consumption, open circuit, blind plate plugging, restricted space, etc, standardize the licensed business division, approval department, the places to be paid attention to in the approval management of each type of operation, the responsibilities of the relevant approval department, the matters needing attention in on-site operation, the approval process, ticket management and other knowledge, and make a detailed description of the relevant special operation contents according to the working characteristics of peak subordinate enterprises. In addition, he also shared the experience of special operation safety management of Plo Pharmaceutical.
2020
07-31
Yunnan Jianfeng won the honor of "key leading enterprise in Pu'er City"
Recently, Yunnan Jianfeng Cement Company was awarded the honorary title of "2016 Pu'er Key Leading Enterprise" by the Pu'er Municipal Party Committee and Municipal Government. In recent years, according to the requirements of the group company's "three reductions and three improvements", Yunnan Jianfeng has focused on internal management and external market expansion, tried every means to reduce costs in production, timely controlled market trends in sales, and constantly refreshed various business indicators. While striving to create its own brand value, Yunnan Jianfeng always regards giving back to the society and serving local development as its own responsibility and obligation. Since the establishment of the company, Yunnan Jianfeng has actively responded to the government's call to support the construction of poor border areas and provide free cement to some poor people. Support the education construction in border areas and donate funds for students in need. At the same time, it has paid various taxes and fees on time in accordance with the law and has become a major profit and tax producer in Pu'er City for years. It has gradually grown from a new cement enterprise in Pu'er area to a leading enterprise in the cement industry. The honor of "key leading enterprises in Pu'er City in 2016" is the affirmation and recognition of Yunnan Jianfeng's work over the past few years by the local government and society. During the "Thirteenth Five-Year Plan" period, southwestern Yunnan is about to usher in an explosive stage of development. The construction of international railway projects, the construction of border expressway projects, the construction of airport projects and the construction of people's livelihood projects will all start this year. The acquisition of the honorary title of "Key Leading Enterprise in Pu'er City in 2016" will also provide strong support for Yunnan Jianfeng to strive for the right to supply these projects. (Li Yun)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page