On-site communication and cross-checking The company organizes a "big consultation" on production safety"
Release time:
2022-06-21
News from our newspaper 6# February 14 and 15 , the safety production supervisors of the group company and its subordinate enterprises gathered in Huang Ping Jianfeng Cement Company to exchange the three-year work of safety risk control and on-site management, and went to front-line positions such as Huang Ping Jianfeng production line and mine to find out potential safety hazards, spot check the safety knowledge learning of employees, and conduct on-site scoring. Since the three-year action work of safety risk management and control and on-site governance has been carried out in an all-round way, all subordinate units of the company have promoted safety risk management and on-site governance in an orderly and in-depth manner according to the nature and characteristics of their respective work. At the safety production work exchange meeting held on November 12, 14, 13, , 6, the safety production supervisors of enterprises such as Huang ping peak, daye peak, Yunnan peak, pharmaceutical company production department, Anhui new north card, Anhui peak north card, international trade, peak cable, peak health, etc. successively carried out three-year actions on safety risk control and on-site management, reported and shared their work results, exchanged experiences, and analyzed gains and losses, it also introduces the development of the company's implementation of the safety production responsibility system, the implementation of safety production laws and regulations, and standard procedures, safety risk control and hidden danger investigation and management, emergency management, education and training content, etc., and summarizes experience and lessons, and looks for advanced counterparts. Gaps and deficiencies in enterprises and brother enterprises. At the
meeting, the overall situation of the company-wide industrial accidents in the first half of 2022 was also reported. The two more serious accidents were mainly analyzed, the causes were analyzed, the lessons were summarized in combination with the characteristics of the accidents, and all enterprises were required to strengthen basic management and continuously improve the construction of safety risk management and control system. In his concluding speech at the meeting, Chen Tianci, chairman of the supervisory board of
Group Company, affirmed the achievements made by various units in carrying out on-site governance for three years and risk prevention and control, and praised Huang Ping Jianfeng for his obvious progress in on-site governance. He also put forward six requirements for the company's work safety, namely: all units should timely and conscientiously summarize the work experience of safety risk prevention and control, strengthen the work exchange and experience sharing between enterprises, strengthen mutual learning and reference, and achieve the effect of common progress; All units should learn from the safety accidents in the first half of the year, further improve the risk assessment and control mechanism, and strive to ensure that no safety accidents occur in the second half of the year; further promote the safety risk management and control work, continuously improve the assessment methods and implementation rules according to the requirements of relevant documents of the group company, continuously improve the risk awareness, identification and control level of employees, grasp the results, and truly realize the work requirements of risk management and control management; To achieve the application of"typical illegal operation behavior 50 " education, and to pay close attention to practical application on the basis of previous training and assessment, so as to not only memorize, it can also avoid and correct illegal operations and eliminate potential safety hazards in actual work. In terms of the promotion of the three-year on-site governance action, all units should keep pace with the times while implementing the plan and striving to complete it ahead of schedule. According to the current technical development level and the needs of the situation, timely adjust or increase the rectification projects; continuously improve the professional quality of safety management personnel and strengthen professional learning, it is required that all enterprise safety supervisors must obtain the qualification of registered safety engineer before the end of 2023
, and the leaders in charge of enterprises are encouraged to obtain the qualification certificate of registered safety engineer. After themeeting, the inspection team went to Huangping Jianfeng factory and mining area to carry out a large-scale inspection of safety production from workshop to workshop, from post to post and from link to link. The inspection team checked the equipment and facilities such as ammonia tank area, grate cooler, machine repair, warehouse, raw material roller press, etc., the risk control measures and personal protection in the delivery area and maintenance site, and "consultation to check the pulse" to sort out the hidden safety hazards, huang Ping Jianfeng is required to carefully analyze the causes of potential safety hazards, carry out rectification within a time limit, follow up and supervise until the hidden hazards are eliminated, form closed-loop management, and continuously improve the risk prevention and control system, so as to truly make safety accidents "impossible". On 15 , the participants went into workshops and departments in groups to conduct spot checks and inspections on the on-site management and risk control management of Huang Ping's peak work, and scored on the spot. According to the requirements of the company's safety risk prevention and control superior enterprise appraisal, on-site random sampling and random questions were asked. Through the examination of front-line employees' answers and relevant documents, the scores were scored against the
11items of the scoring standard. This is also the first corporate cross-check organized by the group company.
Through experience exchange and cross-examination, the safety production supervisors attending the meeting unanimously said that this form of special discussion and cross-examination enables everyone to learn good methods and experiences of brother enterprises, be practical and emphasize practical results, and hope to be organized regularly.It is understood that starting from 16 , the inspection team also successively went to Yunnan Jianfeng, Daye Jianfeng and other units to carry out safety inspections until the inspection and assessment of the production and business units of the whole group were completed. (Song Shijie)
More information
July 1 is the anniversary of the founding of the Communist Party of China. The party committee of the group organized the party members of the group headquarters and the heads of the grassroots party organizations to go to Jinggangshan, the red holy land, to retake the revolutionary road taken by the ancestors and review the history of revolutionary struggle.
2023
07-11
The Party Committee of the Group organized a thematic education seminar to study
On June 27, the Party Committee of the Group Company organized an education seminar on the theme of studying and implementing Xi Jinping's thoughts on socialism with Chinese characteristics in the new era. Jiang Xinwang, a professor and master tutor of Zhejiang Normal University, explained the deployment requirements of economic work and Xi Jinping's economic thoughts in the report of the 20th National Congress of the Communist Party of China with the theme of "accelerating the construction of a new development pattern and promoting high-quality development.
2023
07-11
Jianfeng Pharmaceutical rehired Academician Wang Guangji as Chief Scientist
On April 30, Jiang Xiaomeng, chairman of the group company and chairman of Jianfeng Pharmaceutical Company, on behalf of Jianfeng Pharmaceutical Company, issued a letter of appointment to Professor Wang Guangji, academician of the Chinese Academy of Engineering, and renewed him as the chief scientist of the pharmaceutical company.
2023
05-11
Jinhua Development Conference and Wucheng Development Conference
On April 30 and May 1, the third Jinhua Development Conference and the second Wucheng Development Conference opened successively. Jiang Xiaomeng, secretary of the party committee and chairman of the group company, won two major awards at the "Jinhua Development Outstanding Achievement Award" and "Wucheng Development Merit Award" at the two conferences, and participated in the Jinhua Life and Health Industry Summit roundtable and other activities.
2023
05-11
Daye Peak Cement Company, National "Green Factory"!
The Ministry of Industry and Information Technology recently announced the 2022 national green manufacturing list, Daye Peak Cement Company successfully ranked among the national "green factories. Green manufacturing is also known as environmentally conscious manufacturing, that is, in the manufacturing process, a modern manufacturing model that comprehensively considers environmental impact and resource benefits. Its purpose is to use technical means to optimize manufacturing procedures, minimize the impact on the environment (negative effect), and resource utilization The highest rate, and the coordination and optimization of economic and social benefits of enterprises, so as to achieve the purpose of resource conservation and sustainable development. In recent years, with the rapid development of social economy, the state attaches great importance to the construction of ecological civilization and ecological environment protection, and further promoting the construction of green manufacturing system has become an important means to promote high-quality development and maintain green water and green mountains forever. As an important part of the green manufacturing system, the Ministry of Industry and Information Technology has organized and carried out the creation of national-level green factories since 2017, and has conducted nationwide selection. It is an authoritative recognition for companies that meet the "green development" and aims to improve my country's green Manufacturing system, comprehensive implementation of green manufacturing, and help the industrial sector achieve the goal of carbon peak and carbon neutrality, it is an important way to promote the structural optimization of various industries, to get out of trouble and upgrade, and to improve quality and efficiency. Green factory refers to the realization of land intensive, raw materials harmless, clean production, waste resources, energy low-carbon factories. As the production unit of the manufacturing industry, the factory is the main body of the implementation of green manufacturing, which belongs to the core support unit of the green manufacturing system, focusing on the greening of the production process. Over the years, Daye Jianfeng has been adhering to the concept of green and low-carbon development, making every effort to build a garden-style factory. Through formulating plans and subdividing targets, it has clearly defined the total energy consumption and pollutant emission targets, and through carrying out school-enterprise cooperation to promote industry-university-research, it has actively implemented the strategy of "carbon peak and carbon neutrality", invested a huge amount of funds every year for technological transformation, and successively implemented technological transformation projects such as electric bags and low-nitrogen combustion upgrading, take the lead in the application of emission reduction technologies such as wet desulfurization and precise denitrification in the cement industry in Hubei Province, and continue to promote energy conservation, consumption reduction, and emission reduction. After the technical transformation, the company can save 3000 tons of standard coal every year, reduce the intensity of carbon dioxide emissions by 3.6, improve the level of energy-saving and green environmental protection management, and achieve the goal of creating a green factory. Being rated as a national-level green factory is not only a high affirmation and encouragement of Daye Peak's adherence to green, low-carbon and innovative development, but also an opportunity for Daye Peak to further promote green development. The person in charge of Daye Peak said that in accordance with national requirements, local industrial and information authorities should strengthen the connection between the units listed in the green manufacturing list and relevant industrial policies, give full play to the demonstration role of point to area, lead the green transformation of the manufacturing industry in the region, strengthen tracking guidance and dynamic management, and review the key indicators specified in the dynamic management table, Daye Peak will be in the future work, we will continue to further promote the management of environmental protection, energy conservation and emission reduction, give full play to the leading role of green factories in benchmarking, make low-carbon energy conservation, green environmental protection and reduce energy consumption the main keynote of enterprise development, and make continuous efforts to promote the high-quality development of enterprises and local economy. (Junin)
2023
04-03
"Cement Economy 50 People Forum" Jiang Xiaomeng Talk about the Future Development of Cement Industry
On March 14, the "Cement Economy 50 Forum" hosted by China Cement Network was held in Hangzhou, inviting 50 influential economic figures in the cement industry to discuss the future development of China's cement industry. Jiang Xiaomeng, chairman of the group company, was invited to attend the forum to discuss the development of the cement industry with his peers. The theme of this forum is "strengthening confidence, seeking breakthrough, and promoting development". It aims to point out the disadvantages of "mud", actively provide suggestions for the competent departments, enterprise transformation and upgrading, strategic and tactical decision-making in the difficult period of the cement industry, and provide new think tank opinions and methods to help form a new cement economic ecology. In the context of the sharp decline in demand, the cement industry is trapped inside and outside, how to revive the glory? How do cement companies survive and develop next? Around these two topics, the guests at the meeting had a heated discussion. Jiang Xiaomeng pointed out in his speech at the forum that the development of any enterprise is inseparable from the healthy development of the industry. Only when the industry is good can the enterprise be good, and the interests of the industry are greater than the interests of the enterprise. In addition, the competition of similar enterprises should seek a breakthrough from the differentiation, and it is unreasonable to blindly pursue low prices. Industry synergy, industry synergy, supply, demand, price, to find a common price line, on the basis of competition and cooperation, from the management services, cost control and other aspects to highlight the advantages of enterprises. The participants reached consensus on many issues after heated discussions. It is generally believed that 2022 is the most complex year in the cement industry in the past decade, affected by the multi-point spread of the epidemic, real estate downturn and other factors, the cement market demand is sluggish, the contradiction between supply and demand is prominent, prices are falling rapidly, business difficulties, the pace of steady growth of the industry is blocked. Entering 2023, under the macroeconomic situation of stabilizing the economy and promoting development, as well as various regions stepping up efforts to promote the construction of major projects, cement demand is expected to increase in 2023 compared with 2022, and the situation in the second half of the year will be better than that in the first half. However, under the expectation of restorative growth in demand, the cement industry is still facing uncertainties such as continued bottoming of real estate, high energy costs, and overcapacity. In this regard, we should resolutely maintain the normal order of the industry, make concerted efforts to help the industry get out of the predicament, and firmly implement staggered peak production. Through mergers and acquisitions, carbon quotas, energy efficiency indicators, environmental protection indicators, coal indicators, market competition and other means to further resolve the contradiction of overcapacity, optimize the industrial layout, and adhere to innovation-driven in digital, intelligent and green development, so as to promote and finally realize the high-quality development of the cement industry. (this newspaper reporter)
2023
03-21