News Center

Home page

Peak Report

News reports

On-site communication and cross-checking The company organizes a "big consultation" on production safety"

Release time:

2022-06-21

News from our newspaper 6# February 14 and 15 , the safety production supervisors of the group company and its subordinate enterprises gathered in Huang Ping Jianfeng Cement Company to exchange the three-year work of safety risk control and on-site management, and went to front-line positions such as Huang Ping Jianfeng production line and mine to find out potential safety hazards, spot check the safety knowledge learning of employees, and conduct on-site scoring. Since the three-year action work of safety risk management and control and on-site governance has been carried out in an all-round way, all subordinate units of the company have promoted safety risk management and on-site governance in an orderly and in-depth manner according to the nature and characteristics of their respective work. At the safety production work exchange meeting held on November 12, 14, 13, , 6, the safety production supervisors of enterprises such as Huang ping peak, daye peak, Yunnan peak, pharmaceutical company production department, Anhui new north card, Anhui peak north card, international trade, peak cable, peak health, etc. successively carried out three-year actions on safety risk control and on-site management, reported and shared their work results, exchanged experiences, and analyzed gains and losses, it also introduces the development of the company's implementation of the safety production responsibility system, the implementation of safety production laws and regulations, and standard procedures, safety risk control and hidden danger investigation and management, emergency management, education and training content, etc., and summarizes experience and lessons, and looks for advanced counterparts. Gaps and deficiencies in enterprises and brother enterprises. At the

meeting, the overall situation of the company-wide industrial accidents in the first half of 2022 was also reported. The two more serious accidents were mainly analyzed, the causes were analyzed, the lessons were summarized in combination with the characteristics of the accidents, and all enterprises were required to strengthen basic management and continuously improve the construction of safety risk management and control system. In his concluding speech at the meeting, Chen Tianci, chairman of the supervisory board of

Group Company, affirmed the achievements made by various units in carrying out on-site governance for three years and risk prevention and control, and praised Huang Ping Jianfeng for his obvious progress in on-site governance. He also put forward six requirements for the company's work safety, namely: all units should timely and conscientiously summarize the work experience of safety risk prevention and control, strengthen the work exchange and experience sharing between enterprises, strengthen mutual learning and reference, and achieve the effect of common progress; All units should learn from the safety accidents in the first half of the year, further improve the risk assessment and control mechanism, and strive to ensure that no safety accidents occur in the second half of the year; further promote the safety risk management and control work, continuously improve the assessment methods and implementation rules according to the requirements of relevant documents of the group company, continuously improve the risk awareness, identification and control level of employees, grasp the results, and truly realize the work requirements of risk management and control management; To achieve the application of

"typical illegal operation behavior 50 " education, and to pay close attention to practical application on the basis of previous training and assessment, so as to not only memorize, it can also avoid and correct illegal operations and eliminate potential safety hazards in actual work. In terms of the promotion of the three-year on-site governance action, all units should keep pace with the times while implementing the plan and striving to complete it ahead of schedule. According to the current technical development level and the needs of the situation, timely adjust or increase the rectification projects; continuously improve the professional quality of safety management personnel and strengthen professional learning, it is required that all enterprise safety supervisors must obtain the qualification of registered safety engineer before the end of 2023

, and the leaders in charge of enterprises are encouraged to obtain the qualification certificate of registered safety engineer. After the

meeting, the inspection team went to Huangping Jianfeng factory and mining area to carry out a large-scale inspection of safety production from workshop to workshop, from post to post and from link to link. The inspection team checked the equipment and facilities such as ammonia tank area, grate cooler, machine repair, warehouse, raw material roller press, etc., the risk control measures and personal protection in the delivery area and maintenance site, and "consultation to check the pulse" to sort out the hidden safety hazards, huang Ping Jianfeng is required to carefully analyze the causes of potential safety hazards, carry out rectification within a time limit, follow up and supervise until the hidden hazards are eliminated, form closed-loop management, and continuously improve the risk prevention and control system, so as to truly make safety accidents "impossible". On 15 , the participants went into workshops and departments in groups to conduct spot checks and inspections on the on-site management and risk control management of Huang Ping's peak work, and scored on the spot. According to the requirements of the company's safety risk prevention and control superior enterprise appraisal, on-site random sampling and random questions were asked. Through the examination of front-line employees' answers and relevant documents, the scores were scored against the

items of the scoring standard. This is also the first corporate cross-check organized by the group company.

Through experience exchange and cross-examination, the safety production supervisors attending the meeting unanimously said that this form of special discussion and cross-examination enables everyone to learn good methods and experiences of brother enterprises, be practical and emphasize practical results, and hope to be organized regularly.

It is understood that starting from 16 , the inspection team also successively went to Yunnan Jianfeng, Daye Jianfeng and other units to carry out safety inspections until the inspection and assessment of the production and business units of the whole group were completed. (Song Shijie)

More information

Peak natural products among the top 20 scientific and technological innovation in TEDA

A few days ago, Tianjin Jianfeng Natural products Research and Development Co., Ltd. stood out among nearly 35000 enterprises in Tianjin Development Zone and won the honor of "Top 20 Scientific and technological Innovation Enterprises of 2015. The selection criteria for the top 20 scientific and technological innovation enterprises in Tianjin Economic and Technological Development Zone mainly include: they have won science and technology awards or patent awards in 2015, as well as other awards above the provincial level; they have obtained the qualification certification or approval of research and development institutions above the provincial level; in 2015, the number of invention and utility model patent applications and authorizations was large, totaling more than 15; in 2015, they were supported by national or Tianjin key science and technology plans; scientific research achievements have made significant progress and technology. According to the above standards, Jianfeng Natural Products Company has not only won the second prize of Tianjin Science and Technology Innovation Project Award for the achievements of "Tianjin Plant Waste Reutilization Technology Engineering Center Construction", but also completed the process research of grape seed extract and ginsenoside to pesticide residues, and formulated the international business standard of grape seed extract (grape seed oligomeric proanthocyanidins). In order to better carry out the pilot experiment, large-scale technical transformation was carried out on the second workshop, and the process optimization of extracting anthocyanins from blueberries has been carried out. At the same time, the main business income, operating profit, tax revenue and other economic indicators of peak natural products company in 2015 have increased significantly year-on-year. Relying on the advantages of excellent quality, good efficiency, great contribution, safety and environmental protection, and good social responsibility, Jianfeng Natural Products Company successfully passed the review and became one of the "Top 20 Scientific and Technological Innovation Enterprises in 2015" in Tianjin Development Zone. (

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-30

Peak pharmaceutical "enterprise information construction project" through the acceptance

The "Enterprise Informatization Construction Project" of Jianfeng Pharmaceutical Company was included in the list of key projects of "Integration of Industrialization and Industrialization" (high-level and in-depth combination of informatization and industrialization) in Jinhua City in 2015, and successfully passed the on-site acceptance of the expert group on the morning of May 18. The main contents of the "enterprise information construction project" of the pharmaceutical company include: the tank farm control system, which solves the problem of closed metering and transportation of organic solvents between the tank farm and the production area, can automatically realize the terminal metering setting, and effectively ensure the safety and environmental protection requirements of the tank farm operation; The air conditioning automatic control system realizes the control of the temperature, humidity and room pressure difference in the air conditioning area through the PLC digital-to-analog conversion of the upper computer and lower computer and the terminal actuator regulator, ensure the cleanliness requirements of the production area environment; The online particle monitoring software system automatically adjusts to the standard flow through the upper computer, vacuum system, laser sensor and isodynamic sampling probe, etc. through the flow detector device and key orifice plate inside each sensor, monitors the temperature, humidity, particles, planktonian bacteria, room pressure difference, etc., implements dynamic management, and realizes visual monitoring of the production process environment. MRP production management system, it makes it easier for the warehouse, workshop, and management personnel to obtain information about the flow of materials in the production process, the implementation of production plans, and product inventory. During the on-site acceptance on the 18th, the acceptance team composed of the Information Department of the Municipal Economic and Information Commission, the Economic and Development Bureau of the Development Zone, the Municipal Information Promotion Association and professors of Zhejiang Normal University checked the contracts of each system software, purchase and transfer records, training records, and problem records in project implementation,

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-31

< 1...58 59 60 61 > 跳转到页