News Center

Home page

Peak Report

News reports

On-site communication and cross-checking The company organizes a "big consultation" on production safety"

Release time:

2022-06-21

News from our newspaper 6# February 14 and 15 , the safety production supervisors of the group company and its subordinate enterprises gathered in Huang Ping Jianfeng Cement Company to exchange the three-year work of safety risk control and on-site management, and went to front-line positions such as Huang Ping Jianfeng production line and mine to find out potential safety hazards, spot check the safety knowledge learning of employees, and conduct on-site scoring. Since the three-year action work of safety risk management and control and on-site governance has been carried out in an all-round way, all subordinate units of the company have promoted safety risk management and on-site governance in an orderly and in-depth manner according to the nature and characteristics of their respective work. At the safety production work exchange meeting held on November 12, 14, 13, , 6, the safety production supervisors of enterprises such as Huang ping peak, daye peak, Yunnan peak, pharmaceutical company production department, Anhui new north card, Anhui peak north card, international trade, peak cable, peak health, etc. successively carried out three-year actions on safety risk control and on-site management, reported and shared their work results, exchanged experiences, and analyzed gains and losses, it also introduces the development of the company's implementation of the safety production responsibility system, the implementation of safety production laws and regulations, and standard procedures, safety risk control and hidden danger investigation and management, emergency management, education and training content, etc., and summarizes experience and lessons, and looks for advanced counterparts. Gaps and deficiencies in enterprises and brother enterprises. At the

meeting, the overall situation of the company-wide industrial accidents in the first half of 2022 was also reported. The two more serious accidents were mainly analyzed, the causes were analyzed, the lessons were summarized in combination with the characteristics of the accidents, and all enterprises were required to strengthen basic management and continuously improve the construction of safety risk management and control system. In his concluding speech at the meeting, Chen Tianci, chairman of the supervisory board of

Group Company, affirmed the achievements made by various units in carrying out on-site governance for three years and risk prevention and control, and praised Huang Ping Jianfeng for his obvious progress in on-site governance. He also put forward six requirements for the company's work safety, namely: all units should timely and conscientiously summarize the work experience of safety risk prevention and control, strengthen the work exchange and experience sharing between enterprises, strengthen mutual learning and reference, and achieve the effect of common progress; All units should learn from the safety accidents in the first half of the year, further improve the risk assessment and control mechanism, and strive to ensure that no safety accidents occur in the second half of the year; further promote the safety risk management and control work, continuously improve the assessment methods and implementation rules according to the requirements of relevant documents of the group company, continuously improve the risk awareness, identification and control level of employees, grasp the results, and truly realize the work requirements of risk management and control management; To achieve the application of

"typical illegal operation behavior 50 " education, and to pay close attention to practical application on the basis of previous training and assessment, so as to not only memorize, it can also avoid and correct illegal operations and eliminate potential safety hazards in actual work. In terms of the promotion of the three-year on-site governance action, all units should keep pace with the times while implementing the plan and striving to complete it ahead of schedule. According to the current technical development level and the needs of the situation, timely adjust or increase the rectification projects; continuously improve the professional quality of safety management personnel and strengthen professional learning, it is required that all enterprise safety supervisors must obtain the qualification of registered safety engineer before the end of 2023

, and the leaders in charge of enterprises are encouraged to obtain the qualification certificate of registered safety engineer. After the

meeting, the inspection team went to Huangping Jianfeng factory and mining area to carry out a large-scale inspection of safety production from workshop to workshop, from post to post and from link to link. The inspection team checked the equipment and facilities such as ammonia tank area, grate cooler, machine repair, warehouse, raw material roller press, etc., the risk control measures and personal protection in the delivery area and maintenance site, and "consultation to check the pulse" to sort out the hidden safety hazards, huang Ping Jianfeng is required to carefully analyze the causes of potential safety hazards, carry out rectification within a time limit, follow up and supervise until the hidden hazards are eliminated, form closed-loop management, and continuously improve the risk prevention and control system, so as to truly make safety accidents "impossible". On 15 , the participants went into workshops and departments in groups to conduct spot checks and inspections on the on-site management and risk control management of Huang Ping's peak work, and scored on the spot. According to the requirements of the company's safety risk prevention and control superior enterprise appraisal, on-site random sampling and random questions were asked. Through the examination of front-line employees' answers and relevant documents, the scores were scored against the

items of the scoring standard. This is also the first corporate cross-check organized by the group company.

Through experience exchange and cross-examination, the safety production supervisors attending the meeting unanimously said that this form of special discussion and cross-examination enables everyone to learn good methods and experiences of brother enterprises, be practical and emphasize practical results, and hope to be organized regularly.

It is understood that starting from 16 , the inspection team also successively went to Yunnan Jianfeng, Daye Jianfeng and other units to carry out safety inspections until the inspection and assessment of the production and business units of the whole group were completed. (Song Shijie)

More information

The company's vocational skill level self-identification training began.

After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.

2021

08-23

Hu Guoyun, vice mayor of Pu'er, visited the peak

On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.

2021

07-21

Municipal SASAC Party Committee Visited Jianfeng Old Party Member

On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.

2021

07-12

"I'll teach you a lesson." Concluded successfully.

On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.

2021

07-12

Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal

On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.

2021

07-12

Return to the scene of party history and reproduce the moment of party history. The party committee of the group organizes special party lessons to study.

What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.

2021

07-01

< 1...9 10 11...61 > 跳转到页