News Center

Home page

Peak Report

News reports

Huang Ping peak marketing staff manufacturing department learning work experience

Release time:

2022-04-06

Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.

Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.

to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.

What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.

When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.

clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.

After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)

At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.

During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.

The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.

(Yang Wentao)

The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.

In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.

Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.

(Liu Chen Qian)

More information

Yunnan peak through the safety standard secondary acceptance

On March 21, Yunnan Jianfeng Cement Company successfully passed the evaluation and acceptance of secondary enterprises for safety production standardization. On the same day, a review team composed of leaders of the Yunnan Provincial Work Safety Supervision Bureau and relevant experts reviewed the implementation of the establishment of Yunnan Jianfeng safety production standardization secondary enterprises. According to the 13 elements involved in the "Standard for Assessment and Rating of Safety Production Standardization in Cement Enterprises", the review team conducted strict assessment and scoring item by item through grouping to check the site and review the data, and finally determined that Yunnan Peak passed the standard acceptance of safety standardization secondary enterprises. Yunnan Jianfeng has always attached great importance to safety production. After passing the three-level safety standard enterprise review in 2015, in order to raise the level of enterprise safety management to a new level, in 2016, it began to create secondary safety standardization. Over the past year, Yunnan Jianfeng has insisted on taking the creation of secondary safety standards as the top priority of production and operation management, and has formulated an implementation plan for production safety standardization in accordance with the requirements of national standardization norms. the content covers production safety responsibility system, education and training, safety inspection, safety facilities management and other safety production management standards, systems and post safety operation procedures, while further strengthening daily safety inspection and regularly organizing emergency plan drills, strengthen the investigation and rectification of potential safety hazards and the supervision of important hazard sources, and further consolidate the foundation of enterprise safety production management. After the review, Zhou Jiping, general manager of Yunnan Jianfeng, said that Yunnan Jianfeng will take this standard as a new starting point. On the basis of consolidating the accident-free achievements in production safety for two consecutive years, it will conscientiously implement the main responsibility of production safety and cultivate

2020

07-30

Pharmaceutical Company Invests in Beihui Bio-Peak Pharmaceutical Plate to Expand its Territory

News from our newspaper On February 28, the 10th meeting of the 9th Board of Directors of the Group Company reviewed and approved the "Proposal on Foreign Investment of Subsidiaries" and the "Proposal on Authorizing the Chairman of the Board of Directors." On the same day, Jianfeng Pharmaceutical signed the "Agreement on Capital Increase and Share Transfer of Beijing Huibaoyuan Biotechnology Co., Ltd." and the "Performance Commitment Compensation Agreement" with relevant parties. It is planned to use Beijing Huibaoyuan Biotechnology Co., Ltd. (Beihui Biotechnology) and its holding subsidiary Guangxi Huibaoyuan Pharmaceutical Technology Co., Ltd. (Guanghui Pharmaceutical) as a platform to jointly carry out new drug research and development, drug production and operation and other pharmaceutical business cooperation. Beihui Biological formerly known as Beijing Huibaoyuan Biotechnology Co., Ltd. The company has strong capabilities in new drug research and development. The actual controller is James Zhou (Zhou Hua), a returned entrepreneurial Ph.D. from Yale University in the United States, and hired Professor Zheng Yongqi from Yale University in the United States as the director of the Huibaoyuan Science and Technology Committee, focusing on anti-tumor and liver disease research. Through the cooperation with Yale University, we have obtained the patent authorization and commercial development license of the new anti-cancer chemical drug trasatabine (trokacitabine)(which has obtained the national new drug clinical approval in August 2016), the anti-hepatitis B chemical drug Crevudine (Clevudine). Guangxi Huibaoyuan Pharmaceutical Technology Co., Ltd., a subsidiary of Beihui Biology, is located in the third international park "China-Malaysia Qinzhou Industrial Park" jointly built by the Chinese government and foreign governments in Guangxi. It covers an area of 214.46 mu and has production workshops for multiple dosage forms such as percolation, tincture, solid preparations and liquid preparations.

2020

07-31

Peak health marketing and a new "play"

Building a New System, Flattening Management, Spike Health Marketing, New "Fit" On February 17, Spike Health Technology Company held a sales meeting to integrate and adjust the construction of a new marketing system and deploy and implement the 2017 sales work. Chen Daiyou, general manager of Health Technology Company, carefully explained and answered the marketing system construction and sales management assessment methods at the meeting, and reached a consensus on unifying thinking. The sales business of Health Technology Company involves three categories: health care products, plant extracts and Chinese herbal pieces. The product attributes and categories are different, and the product sales channels are diversified. In order to facilitate market expansion and adapt to the rapid response to market changes, the Company focuses on key products, key channels and key markets, adjusts the original division model, combines all sales businesses of the Company, establishes a marketing center, and centralizes and unifies flat management. At the meeting, the Health Technology Company issued the "2017 Sales Management Assessment Measures", which takes sales performance as the leading factor, defines the sales staff's business expenses and market expansion support policies, implements quarterly and annual assessment of sales targets, and directly links the assessment of the progress of sales staff's target tasks with monthly income. After two-way selection, adjustment and implementation of sales positions and target tasks, all sales staff of Health Technology Company have signed a sales economic responsibility system. Chen Daiyou hopes that marketers will build confidence to meet the challenges and grow and progress together with the enterprise. At the same time, he said that the health technology company will focus on strengthening the construction and cultivation of the sales team, and carry out training, learning and experience sharing in various ways, so as to improve the business ability and level of the sales team. (Spike Health)

2020

07-31

Peak health marketing and a new "play"

Building a New System, Flattening Management, Spike Health Marketing, New "Way to Work" On February 17, Spike Health Technology Company held a sales meeting to integrate and adjust the construction of a new marketing system and deploy and implement the 2017 sales work. Chen Daiyou, general manager of Health Technology Company, carefully explained and answered the marketing system construction and sales management assessment methods at the meeting, and reached a consensus on unifying thinking. The sales business of Health Technology Company involves three categories: health care products, plant extracts and Chinese herbal pieces. The product attributes and categories are different, and the product sales channels are diversified. In order to facilitate market expansion and adapt to the rapid response to market changes, the Company focuses on key products, key channels and key markets, adjusts the original business model, unifies all sales businesses of the Company, establishes a marketing center, and centralizes and unifies flat management. At the meeting, the Health Technology Company issued the "2017 Sales Management Assessment Measures", which takes sales performance as the leading factor, defines the sales staff's business expenses and market expansion support policies, implements quarterly and annual assessment of sales targets, and directly links the assessment of the progress of sales staff's target tasks with monthly income. After two-way selection, adjustment and implementation of sales positions and target tasks, all sales staff of Health Technology Company have signed a sales economic responsibility system. Chen Daiyou hopes that marketers will build confidence to meet the challenges and grow and progress together with the enterprise. At the same time, he said that the health technology company will focus on strengthening the construction and cultivation of the sales team, and carry out training, learning and experience sharing in various ways, so as to improve the business ability and level of the sales team. (Spike Health)

2020

07-31

Accident-free factory creation enters "second season"

At the beginning of the new year, a major "highlight" of the company's safety and environmental protection management in recent years-the "second quarter" of the establishment of a safety and environmental protection accident-free factory has also begun. Safety and environmental protection accident-free factory creation activities are an important measure for the company to improve the level of on-site management. The first phase of the activity will start on January 1, 2014 and end at the end of 2016 for a period of three years. Since the launch of the activity, all subordinate enterprises of the company have actively organized publicity and training related to safety and environmental protection, strengthened the awareness of safety and environmental protection of all employees, improved the management and operation level of safety and environmental protection; increased investment in safety and environmental protection facilities and equipment; strengthened safety and environmental protection inspection and self-examination and correction of hidden dangers, and timely organized rectification of hidden dangers; strictly assessed the units and relevant responsible persons of the accident, And the accident situation in the group, in order to arouse vigilance and avoid similar accidents. In the past three years, the company's subsidiaries have achieved remarkable results in standardization, safety, and clean operation. Safety and environmental protection accidents have dropped significantly, and no major accidents have occurred, which has effectively promoted the company's safe and civilized production construction. In the 2016 safety and environmental protection accident-free factory establishment assessment conducted a few days ago, a total of 6 units met the accident-free factory standard, of which Yunnan Jianfeng, Jianfeng International Trade and Pharmaceutical Department met the standard for the second consecutive year, and Daye Jianfeng, Qiubin Factory and Cable Company met the standard in the first year. In order to sum up experience and further improve the level of safety and environmental protection management, the Group decided to continue to open

2020

07-31

What will the Chinese Medicine Act bring us?

At the 25th meeting of the Standing Committee of the 12th National People's Congress in December 2016, the the People's Republic of China Chinese Medicine Law (hereinafter referred to as the Chinese Medicine Law) was deliberated and passed, which will come into effect on July 1 this year. As the first comprehensive law that comprehensively and systematically embodies the characteristics of traditional Chinese medicine, the Law of traditional Chinese Medicine clearly stipulates the service of traditional Chinese medicine, the protection and development of traditional Chinese medicine, the training of talents of traditional Chinese medicine, and the scientific research of traditional Chinese medicine. With the change of people's health concept and the continuous innovation of medical mode in recent years, the role of traditional Chinese medicine in health is becoming more and more important. The promulgation of the "Traditional Chinese Medicine Law" has made the development of Chinese medicine more law-based, and it is bound to bring changes to domestic pharmaceutical companies. So, the peak of the pharmaceutical, health products companies will look at the "Chinese Medicine Law", and will have how to deal with it? A few days ago, the reporter interviewed the pharmaceutical companies and peak health technology companies related to the person in charge. What will the Chinese Medicine Act bring us? Reporter: As the general manager of Peak Pharmaceutical, what do you think of the Chinese Medicine Law? Huang Jinlong (Deputy General Manager of the Group Company and General Manager of the Pharmaceutical Company): the Law of traditional Chinese Medicine defines the important position and development policy of traditional Chinese medicine. The state encourages traditional Chinese medicine and western medicine to learn from each other, complement each other, coordinate development, give full play to their respective advantages, and promote the integration of traditional Chinese and western medicine. Traditional Chinese medicine is a huge knowledge system, reflecting the Chinese nation's understanding of life, health and disease. It is precisely because of the distinctive characteristics of Chinese medicine that the Law of Chinese Medicine is used in Chinese medicine clinics, Chinese medicine physicians and doctors.

2020

07-31

< 1...49 50 51...61 > 跳转到页