Thinking outside the box to solve problems
Release time:
2021-09-22
Yunnan Jianfeng Cement Company's kiln tail coal powder said that no matter bituminous coal or lignite is used, coal breakage will occur. This problem has been perplexing production. For many years, it has spent a lot of energy and also affected the stable calcination of rotary kiln and the output and quality of clinker. During the period of
, relevant personnel of Yunnan peak often communicated and discussed with external technicians and personnel of peer users. Some opinions mentioned the position from pulverized coal bin to mixing bin. It originally had a blanking pipe composed of a soft expansion joint, an eccentric blanking pipe, a cone reducing diameter joint and a fixed joint at the entrance of the small bin, and the change from the inner diameter of the gate valve of the pulverized coal silo 600mm to the inner diameter of the small silo entrance 385mm results in poor blanking. After on-site measurement, Yunnan Peak decided to install a soft expansion joint with an inner diameter of 600mm from the lower part of the gate valve of the pulverized coal silo. The lower part of the expansion joint was also changed to a stainless steel round pipe with an inner diameter of 600mm , which was directly open and welded with the top of the silo to form a discharge pipe. After the transformation is completed, there will be no coal cut-off phenomenon when bituminous coal is used, so lignite is resumed. When lignite is used, instantaneous coal cut-off phenomenon occurs occasionally, but it will not affect the temperature in the decomposition furnace and the calcination working condition of the rotary kiln, and the feeding amount of the rotary kiln can be stabilized at more than 260 tons. The transformation achieved the desired effect.
For a long time, I have felt that imported equipment cannot be easily changed, but after this transformation, I have changed my inherent concept. So, sometimes change thinking, also can harvest full.
(Lou Xuxin)
More information
Representatives of the 20th Congress preached the 20th Congress at the peak.
On the afternoon of November 11, a special lecture on the spirit of the Party's 20th Congress was held in the conference room of the Peak Building. Yang Xiayun, a representative of the 20th National Congress, walked into the peak and preached his understanding of the spirit of the 20th National Congress for Party members through personal experience.
2022
11-23
The group party committee organizes and learns the twenty spirits.
On the afternoon of October 28, the party Committee of the group organized all members to hold a special study meeting to earnestly study and understand the communique of the first plenary session of the 20th central Committee of the communist party of China and the revision of the party constitution. Jiang Xiaomeng, Secretary of the Party committee of the group, stressed at the study meeting that the 20th National Congress of the Communist Party of China has drawn a grand blueprint for building a socialist modern country in an all-round way, opened a new chapter in the era of national development, and pointed out the direction for the future development of enterprises. Party organizations at all levels of the group should pay full attention to and earnestly implement it, actively organize party members and cadres to learn the spirit of the spirit of the 20th National Congress, And to guide the future work practice.
2022
11-01
Spike Party Members and Cadres Watch the Opening Meeting of the 20th Congress
At 10 a.m. on October 16, the 20th National Congress of the Communist Party of China was solemnly opened in the Great Hall of the People in Beijing. Xi Jinping delivered a report to the Party's 20th National Congress on behalf of the 19th Central Committee. The group company attaches great importance to and carefully deploys, and organizes all party members and management backbones of the group headquarters and subsidiaries to watch the live broadcast of the opening meeting through the Internet, TV and other methods.
2022
10-23
Jiang Xiaomeng was hired as the "Shuanglong Escort" entrepreneurial mentor.
On September 16, Jiang Xiaomeng, Secretary of the Party committee and chairman of the group company, was employed as the entrepreneurial mentor of "Shuanglong escort" at the launching ceremony of the special action of "Shuanglong escort steady progress and quality improvement" held in Jinhua City and the promotion meeting of innovative products of key talent enterprises in Jinhua City.
2022
09-27
From August 18th to 19th, the 12th Congress of the Zhejiang Federation of Industry and Commerce was held in Hangzhou, and the 12th leadership of the Provincial Federation of Industry and Commerce was elected. Jiang Xiaomeng, Secretary of the Party Committee and Chairman of the Group, was re-elected as Vice President of Zhejiang Chamber of Commerce.
2022
09-01
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page