The implementation of vaccination, strict control of the accumulation of flow dredging dredging, work health and heavy lying peak calm to deal with the double test of the epidemic situation.
Release time:
2021-08-23
into 8# February, Hubei Province first appeared the inflow of close contacts of the new crown pneumonia, the epidemic prevention and control situation tightened. In the face of the double test that followed, Daye Peak Cement Company organized its employees to take precise measures and actively respond to it, and all the work was in good order.
Internal tight external control epidemic prevention situationDue to the outbreak of new coronary pneumonia in many parts of the country in 7# September, confirmed cases have also been found in individual areas of Hubei Province, the epidemic prevention and control situation is suddenly tight. The Delta strain that triggered a new wave of outbreaks has taken on some new features in its spread, and vaccination is the most economical and effective measure to prevent and control the spread of neo-coronary pneumonia. To this end, Daye Peak in the 8# November 1 issued the new crown epidemic normalization prevention and control requirements, as well as through the pre-shift after-shift meeting, plant publicity column and other means of epidemic prevention and control knowledge publicity, all advocate and encourage employees to actively take the initiative to vaccinate, to eat a "reassurance pill". In the implementation of daily internal epidemic prevention and control measures, Daye Peak formulated and issued three phases of normalized prevention and control requirements for the new crown epidemic on 8 , 1 , 8 and 10 . According to the changes in the epidemic prevention and control situation and the characteristics of enterprise work, relevant knowledge was publicized, less travel and less gathering were advocated, and employees' awareness of epidemic protection was strengthened, guide employees to do a good job in self-protection in work and life; Starting from 10 , employees fill in the epidemic prevention and control information form by scanning WeChat codes every day; The enterprise regularly checks the reserve of emergency materials, understands and grasps the purchasing channels of emergency materials, and is ready to purchase at any time. Daily protective articles such as masks are distributed to every employee in each post on time every day. Washing, protection, killing and killing supplies are also placed at fixed points and replenished at any time. When a new wave of epidemics arrives, the Hubei cement market has entered the peak sales season, the wrong peak shutdown maintenance is also about to begin, procurement, sales, transportation, maintenance personnel flow travel and health management has become the top priority of the current epidemic prevention and control. In order to ensure the orderly development of daily work, Daye Peak immediately conveyed the epidemic prevention and control requirements to suppliers, dealers and drivers in place. Especially for long-distance logistics drivers, it is proposed that drivers and accompanying personnel must check their health codes and travel cards when entering the factory, and try to move less in the cab after entering the factory and wear masks after getting off the bus. For maintenance outsourcing personnel, it is required that "unnecessary do not leave the factory, leaving the factory must be reported, the personnel entering the factory must be audited". In the third phase of epidemic prevention and control requirements issued on
10, the Environmental Security Department also specially produced a special two-dimensional code for testing, which was released to relevant units and individuals in advance. Foreign personnel can scan the code and fill in the visitor registration form, and their personal travel, health, vaccination and other information can be transmitted to the mobile phones of the Environmental Security Department and the guard personnel, so as to know and review in advance, avoid the risk of exposure that may be caused by the concentration of "inspection codes" at the factory gate. As of the time of publication, Daye Peak has completed the vaccination except for
5employees who will receive the second vaccination in the near future. All internal prevention and control measures have been strictly implemented. The "check code" for foreign personnel in advance also ensures the smooth verification process and is well received by relevant units and personnel. Dredging and Draining War Rainstorm
812
, Huangshi City started a Class IV emergency response to meteorological disasters (rainstorm). According to the analysis and prediction of meteorological data, heavy precipitation is expected from 12 to 14 , with accumulated rainfall of 80 ~140 mm, local 200 mm above, accompanied by strong convective weather such as thunderstorms and strong winds. After receiving the notice at noon that day, Daye Peak immediately launched the emergency plan, and all emergency personnel on duty stuck to their posts and strengthened inspections of key parts such as drainage channels to prevent "waterlogging" due to poor drainage ". At about 55 o'clock on the night of , the long-lasting rain suddenly increased, and a large area of stagnant water soon appeared in Daye Peak Factory and continued to rise. In the past, when it rained, only low-lying areas in the factory area would have accumulated water. During this rainstorm, all the sections around the office building and the central control building had accumulated water. The accumulated water in low-lying areas soon exceeded
40cm, and even some sections of drainage ditches 60 to 70cm deep had overflow. The lowest-lying cement mill and coal mill area in the plant area has power rooms and electrical equipment. Once soaked by rain, the consequences will be disastrous. Facing the flood situation, Daye peak duty personnel were divided into two groups. Deputy General Manager Li Jiang and equipment supervisors Huang Yanming and Wang Tao organized cleaning of sundries carried by rainwater and dredging drainage outlets in the kiln system to speed up drainage. Wu Xinqiong, manager of the Environmental Security Department, Liu Haihua and Huang Bide, production supervisors, organized shift personnel in the cement mill area to switch the manual gate for flood discharge outside the No.7 bulk warehouse and open the pump. The rainfall on the night of
was much larger than expected, which affected the normal operation of the equipment. As midnight approached, the production and delivery posts were shut down one after another, and all the people who could be organized worked together to rescue the accident.Due to early warning, personnel organization in place and timely emergency disposal, there is no serious water accumulation in key parts of the factory that affects the safety of equipment. Busy until the morning of
on
13, the rain gradually decreased, the accumulated water gradually receded, and daye peak successfully passed the torrential rain disaster. This heavy rainfall in Daye area lasted for five days in a row. Although there was no heavy rain like 12 , the continuous rainy days still brought adverse effects on the production organization, the factory environment and the health of employees. For this reason, Daye Peak seized the intermittent precipitation, urgently cleaned up the silt and garbage debris brought by the rainstorm, and dredged the drainage facilities. In combination with the prevention and control requirements during the epidemic, Daye Peak asked all departments to remind employees to pay special attention to the safety of commuting, and stressed that they should stay in the dormitory during heavy rain to avoid colds and fevers due to rain. The canteen provides ginger soup every day to help employees dispel cold and dampness. There will also be precipitation weather in Hubei Province in the future. In addition to checking and cleaning the factory area, Daye Peak will also focus on checking the mine slopes and flood drainage ditches to avoid dangerous situations. The off-peak maintenance of the production line was also carried out in an orderly manner, and production was resumed on the afternoon of
20. (Fu Yiwu Wu Xinqiong)
More information
Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons
In order to implement the requirements of the higher-level party committee secretary to give in-depth party lectures in enterprises, on July 4, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special lecture on "two studies and one doing" for party members at Yunnan Jianfeng Cement Company. In the lecture, Jiang Xiaomeng started from the background, overall requirements, learning and education content, and main measures of the "two studies and one doing" activities. He hoped that all party members and cadres would understand "awe, gratitude, humility, and decent", and put forward "What should the current enterprise do" and "How should the enterprise go in the future" and other issues. Jiang Xiaomeng analyzed the future development trend of cement and pharmaceutical industries in detail, emphasized the importance of seizing opportunities, and pointed out that with the homogenization of cement industry becoming more and more serious, if we want to take the road of differentiated brand development, the core of competition is to strengthen self management and maximize the cost, so as to improve the competitive advantage. As far as Yunnan Jianfeng is concerned, it is necessary to continuously improve the level of process technology management and increase the hourly output by increasing inspection efforts. Starting from strengthening the control of raw material procurement, the quality and price should be controlled. By strengthening sales management, vigorously develop direct agents, and strive to maximize the profit per ton; By strengthening equipment maintenance, reduce equipment accidents and further reduce the consumption of machine materials; Make good use of people, while constantly tapping talents and cultivating new people, we will gradually control the total number of workers and improve labor productivity. According to the current situation and the company's development strategy, what should the party members of the peak do? Jiang Xiaomeng asked all the party members and cadres of Yunnan peak to play a good vanguard and exemplary role and take the lead in learning new knowledge, new technology and new experience.
2020
07-30
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-30
The Company shall organize special operation safety management training
What kind of management process is needed for the special operation permit? How to manage the ticket of the special operation permit? What are the contents of the eight kinds of special operations?... On June 17, the safety committee of the group company organized a special lecture on safety production to conduct systematic and comprehensive training on the safety management knowledge of special operations. The trainer invited for this training is Ge Zhengliang, head of EHS (Environmental Environment, Health Health, Safety) of Zhejiang Prodbang Pharmaceutical Co., Ltd. He has many years of experience in enterprise safety production management and is also a well-known safety management expert in Jinhua region. He has participated in the enterprise safety and environmental protection inspection organized by Jinhua Safety Supervision Bureau for many times and has a certain understanding of the situation of major enterprises in the peak. In this lecture, Ge Zhengliang divided into four parts: division of special operation license scope, special operation license management process, special operation license ticket management, and eight major types of special operation contents. Combined with relevant laws and regulations and his own practical experience in safety production management, Ge Zhengliang explained in simple terms eight special operation situations such as hot work, hoisting, high place, temporary power consumption, open circuit, blind plate plugging, restricted space, etc, standardize the licensed business division, approval department, the places to be paid attention to in the approval management of each type of operation, the responsibilities of the relevant approval department, the matters needing attention in on-site operation, the approval process, ticket management and other knowledge, and make a detailed description of the relevant special operation contents according to the working characteristics of peak subordinate enterprises. In addition, he also shared the experience of special operation safety management of Plo Pharmaceutical.
2020
07-31
Yunnan Jianfeng won the honor of "key leading enterprise in Pu'er City"
Recently, Yunnan Jianfeng Cement Company was awarded the honorary title of "2016 Pu'er Key Leading Enterprise" by the Pu'er Municipal Party Committee and Municipal Government. In recent years, according to the requirements of the group company's "three reductions and three improvements", Yunnan Jianfeng has focused on internal management and external market expansion, tried every means to reduce costs in production, timely controlled market trends in sales, and constantly refreshed various business indicators. While striving to create its own brand value, Yunnan Jianfeng always regards giving back to the society and serving local development as its own responsibility and obligation. Since the establishment of the company, Yunnan Jianfeng has actively responded to the government's call to support the construction of poor border areas and provide free cement to some poor people. Support the education construction in border areas and donate funds for students in need. At the same time, it has paid various taxes and fees on time in accordance with the law and has become a major profit and tax producer in Pu'er City for years. It has gradually grown from a new cement enterprise in Pu'er area to a leading enterprise in the cement industry. The honor of "key leading enterprises in Pu'er City in 2016" is the affirmation and recognition of Yunnan Jianfeng's work over the past few years by the local government and society. During the "Thirteenth Five-Year Plan" period, southwestern Yunnan is about to usher in an explosive stage of development. The construction of international railway projects, the construction of border expressway projects, the construction of airport projects and the construction of people's livelihood projects will all start this year. The acquisition of the honorary title of "Key Leading Enterprise in Pu'er City in 2016" will also provide strong support for Yunnan Jianfeng to strive for the right to supply these projects. (Li Yun)
2020
07-31