News Center

Home page

Peak Report

News reports

I'm on the spike for thirty years

Release time:

2020-08-14

I stepped onto the stage as a representative of the old employee who served the peak for more than

years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.

I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.

Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.

In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001

1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.

2004

5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.

2015

1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak

years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)

More information

Jianfeng Pharmaceutical Party Committee Commemorates 99th Anniversary of Party Founding

In order to celebrate the 99th anniversary of the founding of the Communist Party of China, on the afternoon of June 28, the Party committee of Jianfeng pharmaceutical company held a special commemorative activity. More than 100 Party members reviewed the oath of joining the party and listened to the special party class of "why can the Communist Party of China" delivered by Professor Zhang Wecai of the Party School of Jinhua municipal Party committee. At the beginning of the activity, Jin Huazhong, secretary of the Party Committee of Jianfeng Pharmaceutical, led all the participating party members to review the oath of joining the Party. He emphasized that the oath of joining the party is a solemn promise of every party member. As a party member, you must not forget your original intention, and compare the content of the oath in your work and life, constantly review, constantly reflect, strengthen self-examination, and use practical actions to fulfill your commitment to the party. Promise. On April 17, 2019, General Secretary Xi Jinping pointed out during an inspection in Chongqing: "We must focus on major issues such as why the Communist Party of China can, why Marxism can, and why socialism with Chinese characteristics is'good. 'Ideological and public opinion guidance." In order to enable party members to have a deeper understanding and understanding of this, the party committee of Jianfeng Pharmaceutical invited Professor Zhang Wancai, member of the School Affairs Committee and dean of the Jinhua Municipal Party School, to give a special lecture entitled "Why the Communist Party of China can. Professor Zhang reviewed the glorious history and great achievements of the Communist Party of China, combining theory with examples and current affairs, and expounded from the aspects of the Communist Party of China taking the people as the center, keeping in mind the mission of seeking happiness for the people, having the courage to self revolution and having historical responsibility. The content of his lectures was profound and simple, the classroom atmosphere was serious and earnest, and Party members were deeply enlightened. After the lecture, Jin Huazhong said in his concluding speech that the purpose of holding this commemorative event is to make all party members keep their vows in mind, strengthen theoretical guidance, strengthen ideals and beliefs, consciously practice the theme education of "not forgetting the original intention and keeping in mind the mission", and enhance all party members. Self-confidence in the road, theory, system, and culture. He stressed that the successful experience of the Communist Party of China, as a great organization, is of great practical significance to the reform and development of enterprises. Party organizations at all levels of Jianfeng Pharmaceutical should further strengthen the building of party branches and party members, further give full play to the political core role of party organizations and the vanguard and exemplary role of party members, promote the production and operation of enterprises with party building, and unite the broad masses of party members, cadres and all staff. devote themselves to all kinds of work with more enthusiasm, higher morale and more pragmatic style, and strive to achieve the annual work goals of the pharmaceutical company, together to build a better peak pharmaceutical industry. (Reporter Chen Shengmu)

2020

07-03

Jianfeng Pharmaceutical Party Committee Commemorates 99th Anniversary of Party Founding

2020

07-03

Jianfeng Pharmaceutical Party Committee Commemorates 99th Anniversary of Party Founding

2020

07-02

Jianfeng Pharmaceutical Party Committee Commemorates 99th Anniversary of Party Founding

2020

07-03

Jianfeng Pharmaceutical Party Committee Commemorates 99th Anniversary of Party Founding

2020

07-02

Spike Pharmaceuticals and its products won the annual "War Epidemic Double Star"

Recently, the results of the 2020 pharmaceutical industry "War Epidemic Star" public welfare selection activity were announced, Zhejiang Peak Pharmaceutical Company and its products injection penciclovir were selected at the same time, becoming the annual "War Epidemic Double Star". Since the outbreak of the new coronary pneumonia epidemic, Chinese pharmaceutical companies have shown their due commitment and dedication to the prevention and control of the epidemic, donating money and materials, developing drugs and developing vaccines. In order to bear in mind the enterprises that have made outstanding contributions in the epidemic prevention and control war, on April 24, the public welfare selection activity of "Star of War Epidemic" in the pharmaceutical industry in 2020 sponsored by the Medical Observer was officially launched. It lasted for more than a month and selected 10 pharmaceutical enterprises with the most social responsibility of "Star of War Epidemic" in 2020 and 10 BRICS varieties of "Star of War Epidemic" in 2020 respectively. As a listed company with a sense of social responsibility, Jianfeng Group takes "moral responsibility to help the world" as its corporate tenet. At the beginning of the outbreak, Jianfeng Group took the initiative to support the prevention and control of the epidemic. According to incomplete statistics, Jianfeng Pharmaceutical and its subsidiaries donated 700000 yuan in cash to medical institutions in Jinhua, Anhui and other places through various channels, as well as medical supplies such as protective clothing, gloves, medical masks, and disinfectants. In addition to targeted donations to medical institutions, at the beginning of the outbreak, the majority of employees of Peak Pharmaceuticals and its affiliated Jinhua Pharmaceutical Company and Peak Pharmacy gave up rest and organized the purchase of masks, alcohol, thermal guns, disinfectants, protective clothing and other epidemic prevention supplies through various channels. Penciclovir for injection, a product of Spike Pharmaceuticals, is the latest dosage form of open-loop nucleoside anti-herpes virus drugs.

2020

07-31

< 1...22 23 24...61 > 跳转到页