News Center

Home page

Peak Report

News reports

I'm on the spike for thirty years

Release time:

2020-08-14

I stepped onto the stage as a representative of the old employee who served the peak for more than

years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.

I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.

Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.

In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001

1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.

2004

5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.

2015

1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak

years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)

More information

Two Cement Enterprises Prosperous Production and Sales in May

With the gradual easing of the new crown epidemic, all over the project has started, Hubei, Yunnan two provinces cement market continued to improve, Daye peak cement company, Yunnan peak cement company two enterprises have recently shown a good momentum of production and sales. In May, the sales volume of Yunnan Jianfeng cement continued to rise. As of the time of publication, the average daily shipment volume reached more than 7400 tons, and the highest daily shipment volume reached more than 8700 tons, and the production capacity was fully released. Over the past few days, Yunnan Peak Packaging System has made great efforts to overcome the impact of narrow distribution sites and many cement varieties to ensure the completion of delivery tasks with good quality and quantity every day. In order to further balance production and sales and create conditions for the homogenization of cement delivered from the factory, Yunnan peak packaging system puts forward work requirements for relevant posts, emphasizes equipment inspection and process inspection during production, strictly implements safety operation procedures, and maintains safe and efficient operation of the system. Due to the impact of the new crown epidemic, Hubei cement market started late, Wuhan market is the hardest hit area, the current project construction is still not fully started, the volume pressure is greater. For this reason, daye peak departments cooperate closely, increase market development efforts, develop new mixing stations, focus on increasing the bulk share of Xianning, Huanggang and Wuhan markets, seize the opportunity of fine weather, and achieve the goal of rapid output. Internally, on the basis of equipment technical renovation and production capacity improvement, the delivery is effectively guaranteed, and the daily delivery capacity can basically be maintained at 10,000 tons. In May, Daye Peak sold more than 300000 tons of cement, an increase of 20% over the same period last year, with an average daily sales volume of more than 9900 tons, the highest in the current period since Daye Peak was put into production.

2020

07-31

The company's "safe production month" activities are about to start

June 2020 is the 19th national "safe production month", the theme of the activity is "eliminating hidden dangers of accidents and building a strong line of defense". A few days ago, the group company issued a notice to arrange the activities related to the organization of "safe production month" and put forward requirements. According to the group's "safe production month" activity plan, different key thematic activities will be held in the four weeks of June. The first week is the "Publicity and Safety Education Week", which focuses on the use of WeChat groups, electronic screens, publicity boards, banners, slogans and other forms for safety publicity, and organizes the study of national safety regulations, company safety system specifications and accident-free factory creation standards, Organize to watch safety warning education films, learn accident cases, etc., and improve employees' safety awareness by creating a safety atmosphere and organizing learning activities. The focus of the activities in the second week is "looking for potential sources of danger around you". Each unit takes departments and teams as units to investigate and analyze the potential risk factors in the process of daily production, maintenance and operation, find out the hazard sources that have not been included in the scope of risk point control, and report to the safety management department of the unit to form a risk assessment report, put forward solutions or suggestions, and supervise the implementation of rectification and timely eliminate potential safety hazards. The third week is the "on-site safety innovation achievements exhibition week", which focuses on the achievements of each unit in on-site safety management and on-site safety facilities in the past year, which are displayed in the form of pictures and texts through beautiful articles and wechat, so as to learn from each other and promote common progress. The fourth week is the "safety training and drill week", and the group company organizes the standardization of safety production and the elimination of hidden dangers.

2020

07-31

Jianfeng Pharmaceuticals ranks among the top 50 creative enterprises in Jinhua

News from our newspaper April 26 is World Intellectual Property Day. Jinhua City released the list of "Top 50 Creative Enterprises" for the first time. Jianfeng Pharmaceutical Company entered the list and ranked second among the enterprises in Jinhua Development Zone. The selection of creative enterprises, the enterprise holds the effective invention patent as the main indicator. Over the years, Jianfeng Pharmaceutical Co., Ltd. has taken "intellectual property rights help enterprise development, and scientific and technological innovation creates a century-old peak" as the company's intellectual property policy. It has actively cooperated with China Pharmaceutical University, Sichuan Institute of Antibiotic Industry, Zhejiang University of Technology, Xiamen University and other units to build a scientific research and innovation platform integrating production, learning and research, and flexibly introduced Academician Wang Guangji and Academician Shan Weiguang with the chief scientist system, according to the direction of enterprise development strategy to carry out scientific research work, and achieved fruitful results. In 2019, Spike Pharmaceuticals applied for 2 invention patents and obtained 5 patent authorizations, including 1 invention. By the end of 2019, Spike Pharmaceuticals had obtained a total of 37 patents (including 2 PCT patents), of which 28 were inventions. In recent years, in order to better integrate with the international market, Jianfeng Pharmaceutical has made a complete patent layout for the new drug DPT under development, and has applied for patent protection in multiple countries through the PCT application channel for core patents, and finally in the high-level United States. And Japan was authorized to lay a solid foundation for the product to enter these two overseas high-end markets. At the same time, around the core patent, applied for the preparation, crystal type patent and obtained the invention patent authorization 5. In addition, pharmaceutical companies have also developed patents for other varieties under research.

2020

07-31

Jianfeng Pharmaceuticals ranks among the top 50 creative enterprises in Jinhua

2020

07-30

Jianfeng Pharmaceuticals ranks among the top 50 creative enterprises in Jinhua

2020

07-22

The 14th meeting of the 10th board of directors and the 9th meeting of the 9th board of supervisors held to review and approve the annual work report and other relevant proposals

On April 24, Jiang Xiaomeng, chairman of the group company, presided over the 14th meeting of the 10th board of directors of the company, and deliberated and passed 14 related reports and motions such as the 2019 annual board of directors report, the 2019 general manager business report and the 2019 annual report. The general manager's report pointed out that 2019 is the first year of the implementation of the group's new five-year strategic development plan (2019-2023) and the new three-year business plan (2019-2021) for each business sector. the management team has carried out various operation and management work in an orderly manner around the general policy of "innovation and reform, integration and promotion, scientific layout and steady development", and has better completed the business objectives set by the board of directors at the beginning of the year. In the whole year, the company achieved a total operating income of 3.548 billion billion yuan, an increase of 5.51 percent over the same period last year; net profit attributable to shareholders was 0.725 billion billion yuan, with earnings per share reaching 2.11 billion yuan, an increase of 23.14 percent over the same period last year, a record high; total assets at the end of the year were 5.475 billion billion yuan, an increase of 11.71 percent over the same period last year; and net assets attributable to shareholders were 3.789 billion billion yuan, an increase of 19.81 percent. During the reporting period, the company's two main businesses have achieved great development, benefiting from the further promotion of supply-side structural reform, the overall operation of the cement industry in 2019 is stable, and the industry benefits are further improved. During the reporting period, the company made new progress in the construction of cement projects, completed the acquisition, capital increase and name change of Guizhou Mingchuan (Guizhou Huangping Jianfeng Cement Co., Ltd.), and continued to invest in the construction of its new dry cement production line with a daily output of 4500 tons of clinker.

2020

07-31

< 1...23 24 25...61 > 跳转到页