News Center

Home page

Peak Report

News reports

I'm on the spike for thirty years

Release time:

2020-08-14

I stepped onto the stage as a representative of the old employee who served the peak for more than

years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.

I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.

Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.

In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001

1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.

2004

5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.

2015

1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak

years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)

More information

Daye Peak Opens "Standard Year"

After the 2019 overhaul ended in early March, Daye Jianfeng Cement Company immediately launched the "Standard Year" activity to carry out standardized rectification in view of a series of defects and problems in the daily management process. The goal of the "Standard Year" activity is to target specific issues that affect employees' work efficiency and safe and environmentally friendly production. Through the formulation of institutionalized work standards, further standardize employees' various operations, improve operational efficiency, and improve grassroots management execution, so as to achieve The purpose of improving the company's image, reducing costs, improving efficiency, and increasing benefits. In order to ensure the smooth progress of the activities, daye peak has set up a promotion team headed by general manager Zhang fengliang to be responsible for the overall promotion of the "standard year" activities, mainly including revising the activity plan, summarizing the standardized implementation standards of various departments, implementing the plan, supervising the implementation progress, evaluating the implementation effect, collecting suggestions and opinions in the implementation process, etc. Based on the foundation, aiming at the details and solving problems is a major feature of Daye peak's "standard year" activity. For example, the "Flange Sealing Operation Standard", which is currently being tried out, not only puts forward standardization requirements for such a "trivial matter" in equipment management as flange sealing, but also attaches "model" photos to make it clear to mechanics What should be done and what should be done. However, this "small standard" aims at three problems: leakage at the production site, extensive mechanic work and waste of materials. Once it becomes the behavior habit of employees, the hygiene and cost control at the production site are bound to be improved. It is understood that Daye peak "standard year" activities plan to continue for three years to promote, activities

2020

07-30

Shanghai North Carolina Jointly Builds Dongto Pharmaceutical Ecological Circle

News from our newspaper On the afternoon of March 26, the "2019 Dongzhi Pharmaceutical Industry Development Forum" co-sponsored by the Pharmaceutical Finance Circle and Shanghai Beika Pharmaceutical Technology Co., Ltd. was held in Dongzhi County, Anhui Province. More than 40 pharmaceutical industry entrepreneurs gathered together., To provide advice and suggestions for the future development of the pharmaceutical industry in Dongzhi County. At present, the pharmaceutical finance circle is an industry organization with certain influence in the field of biomedicine in China. It brings together high-end pharmaceutical industry elites and biomedical enterprises, and is committed to building a pharmaceutical industry ecosystem. With the concept of "co construction, co creation, win-win and sharing", it solves the common key problems of projects, capital and talents in the development of biomedicine, and forms a new ecology in the field of enterprise services. "2019 Dongzhi Pharmaceutical Industry Development Forum" is an important part of the "Anhui Business Investigation Tour" organized by Shanghai Beika and Pharmaceutical Finance Circle. On the morning of the 26th, the delegation visited New North Card Chemical, Zhongwang Pharmaceutical and other enterprises. Lou Xiaohua, executive deputy general manager of North Carolina Company, introduced the current development status of the company, the complete equipment and facilities and standardized management of the two companies, and the business philosophy of technological innovation as the core and "concentration, conscience, and anti-tumor leader" as its own responsibility. It was unanimously affirmed by the members of the delegation. Before the official start of the forum, Huang Jinlong, deputy general manager of the group company and general manager of Jianfeng Pharmaceutical, delivered a speech on behalf of Jianfeng Group, expressing gratitude to the county party committee and county government for the support of the "Dongzhi Pharmaceutical Development Forum" and to all the entrepreneurs who attended the meeting. Welcome, and give a brief introduction to why Jianfeng Group chose to invest in Dongzhi, and invite all colleagues to join in the development of Dongzhi medicine. In academic exchanges,

2020

07-31

Daye Peak Opens "Standard Year"

2020

07-31

Guizhou Huangping Cement Project Started

The expansion of the peak cement industry has taken substantial steps. A few days ago, the opening ceremony of the peak Guizhou Huangping cement project was held in Gulong Town, Huangping County. Huangping County is located in the southeast of Guizhou Province and the northwest of Qiandongnan Miao and Dong Autonomous Prefecture. It is rich in barite, limestone, gypsum, bauxite, mercury and other mineral resources. At the end of 2018, the board of directors of the group company passed the proposal to acquire all the shares of Guizhou Mingchuan company. After the acquisition is completed, Mingchuan Company will become a wholly-owned subsidiary of Jianfeng and will continue to invest about 0.65 billion yuan to build a new dry cement production line with a daily output of 4500 tons of cement clinker in an off-site technological transformation project (with waste heat power generation). On February 28, 2019, the Company and the former shareholders of Mingchuan completed the relevant asset transfer, equity transfer and industrial and commercial change registration procedures. Before the Spring Festival, the preparatory team with Hu Hongwei as the team leader and Lu Hongzheng as the deputy team leader has been stationed at the project site to carry out a series of preparatory work. The Huangping cement project is an important measure to strengthen the development of the company's main business according to the company's strategic policy of "strengthening the main business through cooperation and innovation, standardizing science and seeking development. The construction of the project will strictly follow the requirements of new industrialization, adopt advanced new dry-process rotary kiln production technology and industrial waste slag comprehensive utilization technology, which will not only bring economic and social benefits to the local area, but also further expand the scale of peak cement business. Become a new profit growth point of the company. Yu Jianhong, general manager of the group company, Huang Jinlong, deputy general manager, Zhu Jianwei, secretary of the board of directors, personnel of the preparation team of Huangping cement project, relevant leaders of Huangping County and Gulong Town, and person in charge of the project construction unit participated in the construction.

2020

07-31

Company fully deploys 2019 work

On January 28, the group company held a business analysis meeting to review and summarize the work situation in 2018, arrange and deploy the work for the new year, and put forward work requirements. At the meeting, various professional companies and directly affiliated enterprises made reports on the overall work situation in 2018, focusing on analyzing the existing problems and deficiencies, and proposing corresponding solutions and work plans for 2019. Xiang Chongping, deputy general manager of the group company, made a systematic review of the current human resources efficiency and human resources development of the company. Chen Tianci, chairman of the board of supervisors, made a report and analysis on the internal control, safety and environmental protection work in 2018. Lan Xiaolong, head of finance, analyzed the risks and challenges currently faced by the company according to the operating data and financial situation of its subordinate enterprises. The functional departments and offices of the headquarters also made a brief report on their annual work. Yu Jianhong, general manager of the group company, made a comprehensive review of the company's operation in 2018 and made a comparative analysis of the main economic indicators of each industrial sector. In 2018, the operating indicators of the company's various industrial sectors have improved significantly year-on-year, and the group company has also created the best operating performance in history. All units have completed the formulation of the second round of "three-year business plan", which points out the direction for the next three years of business work; the group company has also completed the first draft of the new "five-year strategic development plan", which is being revised and enriched. In addition, the two main businesses have also made substantial progress in investment expansion and industrial integration around strategic objectives, and the operating costs of major enterprises have decreased to varying degrees; the optimization of organizational structure and post setting has achieved new results, and management efficiency and people

2020

07-31

Company fully deploys 2019 work

2020

07-30

< 1...32 33 34...61 > 跳转到页