I'm on the spike for thirty years
Release time:
2020-08-14
I stepped onto the stage as a representative of the old employee who served the peak for more than
years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.
I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.
Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.
In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001
1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.
5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.
2015
1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak
years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)
More information
Spike Health was identified as Zhejiang Agricultural Science and Technology R & D Center
Zhejiang Provincial Department of science and technology recently issued a notice, peak health technology company research and development center was identified as Zhejiang agricultural science and technology research and development center. According to the relevant requirements, Zhejiang agricultural science and technology research and development center must be established with national and provincial agricultural leading enterprises, agricultural science and technology enterprises or other scientific and technological agricultural enterprises with high scientific and technological content as the carrier, with strong economic strength and scientific and technological research and development foundation; The annual sales income of the enterprise is more than 10 million yuan, and the R & D center has more than 10 full-time technicians, of whom more than 30% have bachelor's degree or above; the annual technology development funds shall not be less than 3% of the sales revenue of the enterprise; it has the necessary instruments and equipment and fixed and special places to meet the research and development; it has the conditions for the application of agricultural technology information network. The main business of the enterprise is clear, and it is the priority industry in our province. The technological innovation achievements have a wide range of radiation, the enterprise system is sound, and the operating mechanism is good. With the domestic, provincial institutions of higher learning, scientific research units have established a stable relationship of scientific research cooperation. Since its establishment, Jianfeng Health has attached great importance to the construction of innovation platform and the cultivation of scientific and technological talents. In 2016, it has been recognized as Jinhua agricultural science and technology enterprise and municipal agricultural science and technology research and development center. In 2017, research and development investment accounted for 5.06 of sales revenue, and full-time research and development personnel with bachelor's degree or above accounted for 80.9, consisting of talents including traditional Chinese medicine, traditional Chinese medicine preparation, agriculture and biotechnology, pharmacy, analysis, plant extraction, food engineering, etc. Dr. Li Wende, head of the research and development center, was also selected "Jinhua Shuanglong plan talent" in 2017 ". In recent years, peak health and Zhejiang workers.
2020
07-31
Chairman Jiang Xiaomeng Directs Work in Yunnan Peak
On December 16, Jiang Xiaomeng, Secretary of the Party committee and chairman of the group company, went to Yunnan Jianfeng cement company to investigate and guide the work. On the morning of the same day, accompanied by the Yunnan peak management team, Jiang Xiaomeng went deep into the front line and successively went to the central control room of the production and manufacturing department, the raw material clay yard, the lignite yard and other areas for field investigation and investigation to understand the problems existing in the production and operation process. Subsequently, a business analysis meeting was held to make a comparative analysis of the various business indicators of Yunnan Jianfeng from January to November this year, and put forward two requirements to the management team: further strengthen internal management and improve execution; strengthen the coordination of external relations, and improve The ability and level of enterprise resource acquisition. At the Yunnan Jianfeng middle-level cadre meeting held on the afternoon of the 16th, Jiang Xiaomeng first fully affirmed Yunnan Jianfeng's highest output and best benefits since it was put into production in 2018, and expressed his gratitude to all cadres and employees of Yunnan Jianfeng for their hard work. After that, Jiang Xiaomeng made a detailed analysis of the cement industry and the regional market environment in Yunnan, and combined with the current production and operation situation of Yunnan Jianfeng, put forward the focus of the next step: 1. should fully attach importance to and mobilize the initiative and responsibility of employees at all levels to improve the overall execution of the team; 2. raw material mines are an important factor restricting the future development of cement enterprises, which should be paid full attention to and formulate clear strategies and methods, set out a timetable to obtain future production resources as much as possible; 3. continuously advocate and promote technological innovation, keep pace with the times, continuously improve production management, equipment management, production technology level, and maintain the competitive advantage of the industry; 4. further strengthen production
2020
07-31
Chairman Jiang Xiaomeng Directs Work in Yunnan Peak
On December 16, Jiang Xiaomeng, Secretary of the Party committee and chairman of the group company, went to Yunnan Jianfeng cement company to investigate and guide the work. On the morning of the same day, accompanied by the Yunnan peak management team, Jiang Xiaomeng went deep into the front line and successively went to the central control room of the production and manufacturing department, the raw material clay yard, the lignite yard and other areas for field investigation and investigation to understand the problems existing in the production and operation process. Subsequently, a business analysis meeting was held to make a comparative analysis of the various business indicators of Yunnan Jianfeng from January to November this year, and put forward two requirements to the management team: further strengthen internal management and improve execution; strengthen the coordination of external relations, and improve The ability and level of enterprise resource acquisition. At the Yunnan Jianfeng middle-level cadre meeting held on the afternoon of the 16th, Jiang Xiaomeng first fully affirmed Yunnan Jianfeng's highest output and best benefits since it was put into production in 2018, and expressed his gratitude to all cadres and employees of Yunnan Jianfeng for their hard work. After that, Jiang Xiaomeng made a detailed analysis of the cement industry and the regional market environment in Yunnan, and combined with the current production and operation situation of Yunnan Jianfeng, put forward the focus of the next step: 1. should fully attach importance to and mobilize the initiative and responsibility of employees at all levels to improve the overall execution of the team; 2. raw material mines are an important factor restricting the future development of cement enterprises, which should be paid full attention to and formulate clear strategies and methods, set out a timetable to obtain future production resources as much as possible; 3. continuously advocate and promote technological innovation, keep pace with the times, continuously improve production management, equipment management, production technology level, and maintain the competitive advantage of the industry; 4. further strengthen production
2020
07-30
Editor's note: On November 20, the first page of "Jinhua Daily" published "Focus on sticking to the peak forever-Enlightenment of Jianfeng Group's 60 years of entrepreneurship" written by the reporter of the newspaper, which was specially reprinted by this newspaper. Focus on sticking to the peak forever-Jianfeng Group's 60 years of entrepreneurship enlightenment "Jinhua Daily" reporter Shao Xuilian as of the end of the third quarter of this year, the total assets of 4.788 billion yuan, net assets of 3.366 billion yuan, the realization of the parent company's net profit of 0.488 billion yuan, earnings per share of 1.42 yuan. Recently, Jianfeng Group disclosed its beautiful report for the third quarter of 2018, celebrating its 60th anniversary with the best operating results in history. Wind and rain for 60 years. With sustained and steady high-quality development, the peak people are moving towards a comprehensive modern enterprise group with strong core competitiveness. Strategy: Focus and Professionalism In 1958, the first generation of peak people built the first cement factory in Jinhua history at the foot of peak mountain. Beginning in 1983, through horizontal alliances with township enterprises, the formation of enterprise groups, and the implementation of shareholding reforms, Jianfeng has developed from a small state-owned cement plant to the first listed company in China's cement industry. Since then, in the stage of diversification, the peak will develop the pharmaceutical industry into the second pillar industry. In 2007, it joined forces with the central enterprise China Building Materials to participate in the establishment of Southern Cement and strategically shifted the focus of the cement industry; at the same time, through corporate mergers and acquisitions and technological innovation, the pharmaceutical industry has further exerted its strength. Today, Jianfeng Group has 33 participating and holding subsidiaries, involving building materials, medicine, big health, modern logistics, national.
2020
07-31
News from our newspaper On the occasion of the celebration of the 60th anniversary of Jianfeng's entrepreneurship, the selection results of the two competitions of "Me and Jianfeng" essay and employee calligraphy and painting photography exhibition are also fresh. Since July 2017, more than 50 contributions have been received from employees and their families. According to the overall situation of the content and writing level of the solicitation, 3 first prize works, 5 second prize works and 7 third prize works were selected. The staff calligraphy and painting photography exhibition began to call for contributions in early April. in just five months, it received more than 100 works from dozens of authors from various enterprises under the group, and successfully held the exhibition from October 10 to 17, which was welcomed and praised by the majority of employees. After a comprehensive selection of employee contributions, a total of 3 first-class works, 5 second-class works, and 7 third-class works were selected. In order to ensure the fairness and impartiality of the selection, the works of the leading group, working group members and specially invited works to commemorate the 60th anniversary of Jianfeng Entrepreneurship will not participate in the selection of the grade award. (The list of winners is attached) (This reporter) "I and the peak" essay list first prize "mother and son deep love" author: Daye peak Shi Fu "I have a date with the peak" author: Yunnan peak Luo Meiyan "buying a house" author: peak cable Lu Chaofang second prize "ten years, sixty years" author: pharmaceutical sales company Xu Yuting "my peak road" author: daye Peak Yang Zhendong's "My Teacher" Author: Fan Tufa, Municipal Pharmaceutical Company, "Peak Grows with Me for 20 Years" Author: Xu Junxiong, Pharmaceutical Sales Company, "Peak Grows with Me"
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page