News Center

Home page

Peak Report

News reports

I'm on the spike for thirty years

Release time:

2020-08-14

I stepped onto the stage as a representative of the old employee who served the peak for more than

years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.

I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.

Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.

In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001

1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.

2004

5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.

2015

1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak

years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)

More information

"Spike" Cement Becomes Yunnan Famous Brand Product

News from our newspaper At the beginning of the new year, good news came from Yunnan Jianfeng Cement Company. The "Jianfeng" brand cement successfully passed the examination and approval and won the title of "Yunnan Famous Brand Product. Since it was put into production in 2013, the "Jianfeng" brand cement produced by Yunnan Jianfeng has won good sales performance and reputation in the southwest Yunnan market, and its popularity and brand influence have been continuously improved. Therefore, Yunnan Jianfeng started to declare "famous brand products" in 2016. After preliminary data preparation, preliminary examination by Pu'er Municipal Bureau of Quality and Technical Supervision, expert review by Yunnan Provincial Bureau of Quality and Technical Supervision and on-site verification, Yunnan Provincial Bureau of Quality and Technical Supervision finally passed the examination and approval of "Yunnan Famous Brand Products" organized by Yunnan Provincial Strategic Leading Group for Implementing Brand and Strong Quality Province in 2017. The acquisition of this honorary title will further enhance the market competitiveness of Jianfeng Cement in southwestern Yunnan, and also increase the popularity of Yunnan Jianfeng, laying a more solid foundation for further market development in the future. (Li Chun)

2020

07-31

Chairman Jiang Xiaomeng proposed: "Four Focuses, Four Precautions" in 2017"

At the 2016 annual summary commendation conference held on January 20, Jiang Xiaomeng, secretary of the party Committee and chairman of the group company, made a concluding speech, fully affirming the company's work in 2016 and putting forward the requirements of "four focuses and four precautions" for the enterprise management in 2017. In his concluding speech entitled "Continuously Improve Organizational Competitiveness and Make persistent Efforts to Do All the Work in 2017", Jiang Xiaomeng said that in 2016, the group company won the silver medal of Zhejiang Industrial Award, the trademark of "Peak" was recognized as a well-known trademark in China, Yunnan Peak and Tianjin Natural Products Company achieved the best results in history, Daye Peak had the lowest production cost and best benefits in the region, and Peak Pharmaceutical had a good start in cooperation and upgrading, at the same time, Yunnan Jianfeng, Daye Jianfeng, pharmaceutical companies, natural products companies and other diligent and continuous development teams have emerged. A large number of individuals and collectives who work hard and hard are worthy of praise and affirmation. The ancients said that "good players seek momentum", "potential" is the situation, trend, situation, and development trend related to the overall situation; only those who seek momentum can stand high and see far. Only by being good at seeking the situation and then being good at taking advantage of the situation can we seize the first opportunity, find a new situation and create a new realm. New policies and new demands are forcing us to continue to reform and innovate. Managers at all levels must grasp the trend of industry and national policies in a timely manner, actively respond, follow the trend, and move in order to achieve better performance. In combination with the arrangements for 2017 in the general manager's report, Jiang Xiaomeng asked cadres and employees at all levels of the company to make great efforts to do so."

2020

07-31

"Spike" Cement Becomes Yunnan Famous Brand Product

2020

07-30

Chairman Jiang Xiaomeng Elected Chairman of Jinhua City Federation of Industry and Commerce was named "2016 Faith Good Wushang"

On January 4, the Jinhua Federation of Industry and Commerce held the sixth member congress. Jiang Xiaomeng, chairman of the group company, was elected as the chairman of the Jinhua Federation of Industry and Commerce at the meeting, and served as 20 "2016 Xinyi Good Wu Merchants" One of the commendations from relevant departments. Jinhua city leaders Zhao Guangjun, and military and civilian, Huang Jinchao, Chen Xiao, Shao Guoqiang, Xu Zhangcai attended the opening ceremony of the conference. Zhao Guangjun, Secretary of the municipal Party committee, congratulated the convening of the conference on behalf of the four groups of the city. He hoped that the Federation of industry and Commerce at all levels and the majority of non-public economic personages would unify their thoughts and actions to the deployment requirements of the plenary session of the municipal Party committee, further strengthen their confidence, grasp the general trend, forge ahead, always maintain the correct political direction, firmly promote the development of non-public economy, and make greater contributions to the rise of Zhejiang. At this meeting, Jiang Xiaomeng, chairman of the group company, was elected as the new chairman of the Jinhua City Federation of Industry and Commerce. Jiang Xiaomeng said in his speech that the Federation of Industry and Commerce is a bridge and link between the party and the government to connect with people in the non-public economy, an assistant to the government in managing and serving the non-public economy, and an important window for the interests of the broad non-public economy. it represents the fundamental interests of the broad non-public economy. In the next five years, the new Federation of Industry and Commerce will continue to enhance cohesion and influence based on service; give full play to the role of "guidance" and "bridge", and always maintain sensitivity to the new situation with advanced awareness and long-term vision, and pay close attention to domestic and foreign Industrial development trends and economic development trends, timely discover new situations, study new problems, and act as a bridge between the government and enterprises

2020

07-31

Chairman Jiang Xiaomeng Elected Chairman of Jinhua City Federation of Industry and Commerce was named "2016 Faith Good Wushang"

2020

07-30

"Peak" cement again won the title of "Zhejiang famous brand products"

On December 30, 2016, Zhejiang Famous Brand Strategy Promotion Committee issued an announcement that 258 products, including "Peak" brand cement, were rated as Zhejiang Famous Brand Products in 2016. Zhejiang famous brand products are based on the provisions of the "Zhejiang Famous Brand Product Identification and Management Measures" and the "Zhejiang Regional Famous Brand Evaluation Management Measures (Trial)", on the basis of voluntary declaration by enterprises, review and recommendation by the district and municipal quality and technical supervision departments, the provincial quality and technical supervision The department organizes preliminary review and evaluation, departmental verification, industry review, and is determined after deliberation by the plenary meeting of the Zhejiang Famous Brand Strategy Promotion Committee and social publicity. The validity period of Zhejiang famous brand products in 2016 is until December 31, 2019. Jianfeng brand cement has maintained this honor for 17 consecutive years since it first won the title of "Zhejiang Famous Brand Product" in 2000. Since the establishment of Jinhua Cement Factory in 1958, several generations of peak people have gone through ups and downs and made continuous efforts to create the "peak" cement brand, which enjoys a high reputation in Zhejiang region, especially in the central and southwest regions of Zhejiang. Peak cement is also based on this, out of Zhejiang, to the central and western regions of development. At present, in Zhejiang region, the "peak" cement trademark is still in the south peak, Fuyang Shanya, Tiger Eagle and other enterprises to maintain licensing use, in the past three years there are still more than 1100 million tons of "peak" brand cement supply Zhejiang market, peak brand effect has been greater play. (Cement Company)

2020

07-31

< 1...51 52 53...61 > 跳转到页