I'm on the spike for thirty years
Release time:
2020-08-14
I stepped onto the stage as a representative of the old employee who served the peak for more than
years to receive souvenirs from the leaders of the group company at the peak 30 years 11 3 and the peak entrepreneurship 60 anniversary party. At that moment, my excitement was hard to express, and I also remembered the little things since I entered the peak.
I remember that it was 1988 8 28 . I stepped into the peak with excitement. After a week of training, I was assigned to the raw material workshop to fight back and break as a crushing worker. At that time, in the vertical kiln cement plant, because there was no large crusher, the particle size of limestone entering the crusher could not be greater than 30 cm, and those larger than the requirements must be crushed by the conveyor chain plate machine, thus having our type of work. Due to inexperience, after a shift, my two calves were full of wounds pierced and marked by splashed stone debris, and there was blood everywhere. It was miserable. Fortunately, under the careful guidance of the old master, after a few days of training and mastering the skills, the work will save more effort and less injuries.
Six months later, my efforts were recognized by the workshop management and I was transferred to the workshop maintenance team as a repairman. Under the leadership of the masters, I quickly mastered some basic knowledge of equipment maintenance, and was assigned to be a maintenance worker on duty in less than three months. At that time, there was a lot of equipment renovation and upgrading work in the factory, and the gold mud factory was preparing to apply for a national secondary enterprise. perhaps because of a certain understanding and previous carpentry work, the spare parts I made were more practical and beautiful than those made by others, so the workshop adjusted my work, mainly making spare parts and on-site renovation, to control running, running, dripping and leaking. According to the backward production technology at that time, we were able to clean up the workshop floor with mops and verify the equipment hygiene inspection with white gloves. The efforts we made can be imagined. It is also with the concerted efforts of all the staff that we have achieved very good results.
In January of 1990 , I was transferred to the Group's mechanical and electrical power plant to learn sheet metal technology from my master. That was the period of vigorous development after the formation of the group. The workload of plate making was very large, and it was also the best time for our young people to learn technology. Every day, I did a good job of lofting and marking, and went to rob the cutting gun and electric welding pliers, "forcing" the electric welder to teach me gas cutting and electric welding-due to the relatively fine division of labor at that time, the sheet metal worker was responsible for lofting, marking and patching. gas cutting and welding were all the work of the electric welder, and everyone's code had to be typed after the workpiece was completed and accepted. if the quality of gas cutting and welding was poor, the electric welder. In this way, after ten years of hard work, my technical level and organizational ability have been improved and recognized by my colleagues. 2001
1 , I became deputy director of the mechanical and electrical workshop. This is not only a change of position, but also a change of function. In the past, you only need to do it yourself. When you become a deputy director, you not only need to be able to do it yourself, but also lead the workshop staff to work hard, improve the overall skill level, and improve the maintenance. Quality and work efficiency. In those years, the technical transformation, maintenance, and repair of the old and waste in the mechanical and electrical workshop were carried out vividly and won a lot of praise. With the development of the peak, we have also got more and more room for development.
5 April 8 , I walked out of Jinhua with uneasy feelings and reported to Fuyang Jianfeng Dengcheng Cement Co., Ltd., the first stop of the peak "out of Jinhua to run cement", where there was our first new dry rotary kiln production line of the peak. When I came to a strange working environment, came into contact with a strange production process, and saw such a large equipment for the first time, I was a little shocked and soberly realized that I had to learn again. According to the work arrangement, I was initially responsible for the management of the mechanics. During that time, I followed the technicians of the equipment manufacturer to debug the machine every day, constantly learning and groping, and the concept of equipment management completely changed. In a few years, I have grown from a mechanic supervisor to an equipment engineer. The equipment management level of the enterprise is getting higher and higher. The effective operation rate and the control level of machine material consumption are in the forefront of peer enterprises.
2015
1 , I went out of Zhejiang and came to Yunnan Jianfeng Cement Co., Ltd. to take on the equipment preservation work of the whole enterprise. This is a new challenge for me. It happens that the enterprise is adjusting its management mode, from full participation in equipment management to security personnel responsible for equipment operation, maintenance, inspection and management. My work content has increased and my responsibilities have become heavier. To this end, I started from the aspects of working plan formulation, strengthening equipment inspection, carrying out predictive maintenance, training staff skills, improving maintenance quality, etc., and worked together with my colleagues, and the operation rate of the main engine increased year by year. I changed many positions and made some achievements in the peak
years, but what makes me more happy is my personal progress in this process. He entered the factory in 1988 , completed the Senior high school study of night school in 1992 , passed the senior worker in 1998 , was appraised as a technician in 2000 , obtained the junior college diploma in 2003 , was appraised as a senior technician in 2007 , and obtained the qualification of equipment engineer in 2009 , step by step, I grew up with the spikes. Here, I would like to sincerely thank the peak to give the platform, so that I can witness their growth, fully display their talents. In the days to come, I will work with my colleagues to make continuous efforts for the grand goal of "one hundred years peak! (Lou Xuxin)
More information
On January 4, the Jinhua Federation of Industry and Commerce held the sixth member congress. Jiang Xiaomeng, chairman of the group company, was elected as the chairman of the Jinhua Federation of Industry and Commerce at the meeting, and served as 20 "2016 Xinyi Good Wu Merchants" One of the commendations from relevant departments. Jinhua city leaders Zhao Guangjun, and military and civilian, Huang Jinchao, Chen Xiao, Shao Guoqiang, Xu Zhangcai attended the opening ceremony of the conference. Zhao Guangjun, Secretary of the municipal Party committee, congratulated the convening of the conference on behalf of the four groups of the city. He hoped that the Federation of industry and Commerce at all levels and the majority of non-public economic personages would unify their thoughts and actions to the deployment requirements of the plenary session of the municipal Party committee, further strengthen their confidence, grasp the general trend, forge ahead, always maintain the correct political direction, firmly promote the development of non-public economy, and make greater contributions to the rise of Zhejiang. At this meeting, Jiang Xiaomeng, chairman of the group company, was elected as the new chairman of the Jinhua City Federation of Industry and Commerce. Jiang Xiaomeng said in his speech that the Federation of Industry and Commerce is a bridge and link between the party and the government to connect with people in the non-public economy, an assistant to the government in managing and serving the non-public economy, and an important window for the interests of the broad non-public economy. it represents the fundamental interests of the broad non-public economy. In the next five years, the new Federation of Industry and Commerce will continue to enhance cohesion and influence based on service; give full play to the role of "guidance" and "bridge", and always maintain sensitivity to the new situation with advanced awareness and long-term vision, and pay close attention to domestic and foreign Industrial development trends and economic development trends, timely discover new situations, study new problems, and act as a bridge between the government and enterprises
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-31
Since the beginning of the 2016 qualification evaluation work of the group company in late November, it has been carried out in an orderly manner according to the established procedures. Compared with previous years, this year, according to the actual situation of the company, new cement plate job settings and development channels and other content. According to the provisions of the Company's Measures for the Administration of Staff Qualifications, the scope of application of the qualification assessment is for all employees of the Group's non-administrative position series, which is divided into three categories: management, technology and technical operation. Among them, the management and technical categories are divided into five grades, each with 2-4 grades; the mechanic operation category is divided into four grades, each with 2-4 grades. The Group Company establishes a qualification evaluation committee, which is responsible for guiding the evaluation of the qualifications of the Group Company, and conducting the evaluation of the qualifications of each department (office) of the Group Company and the qualifications of four levels and above within the scope of the Group Company; professional companies and directly affiliated enterprises establish an evaluation organization, which is responsible for the evaluation of the qualifications of the enterprise and subordinate enterprises at level 3 and below; the Human Resources Department of CNPC is responsible for organizing the review work and carrying out the transactional work of qualification management. Compared with previous years, the company has made a supplementary revision to the "Measures for the Administration of Employee Qualifications" this year, adding a "cement sector position setting and development channel", aiming at the actual situation and professional characteristics of the current two cement companies implementing job optimization, positions such as safety and environmental protection management, sales management, procurement, warehouse management, quality management, equipment maintenance (management), electrical maintenance (management), process operation, inspection workers, etc. are set up respectively, and different levels are divided, and corresponding evaluation standards are set. In accordance with the Management Measures, the post
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-30
"Peak" was identified as China's well-known trademark
Recently, the Trademark Office of the State Administration for Industry and Commerce issued a document that the "Jianfeng" trademark held by Jianfeng Pharmaceutical Company was recognized as a well-known trademark. The main contents of the "Reply of the Trademark Office of the State Administration for Industry and Commerce on the Identification of" Jianfeng "Trademark as a Well-known Trademark" (Shang Standard Chi Zi [2016] No. 121) are as follows: according to the relevant provisions of the Trademark Law, the regulations for the implementation of the Trademark Law and the provisions on the identification and protection of well-known trademarks, after examination and research, it is recognized that the registered trademark of "Jianfeng" used by Zhejiang Jianfeng Pharmaceutical Co., Ltd. in category 5 of the International Classification of Goods and Services for Trademark Registration is a well-known trademark. The identification of the well-known trademark has effectively enhanced the brand value of the company, helped to improve the popularity of the company's products, and further strengthened the protection of the "peak" trademark. (Zhou Hengbin) News link: "well-known trademark" (Well-knownTradeMark), also known as well-known trademark, first appeared in the Paris Convention for the Protection of Industrial property signed in 1883. According to international and domestic intellectual property laws and regulations, the well-known trademark system is created to fully protect the legitimate rights and interests of well-known trademark owners. Its purpose is to reasonably protect the relevant trademark ownership, maintain fair competition, and stop infringement of others' trademark exclusive rights. behavior. China joined the Convention in 1984, according to the provisions of the Convention to give special legal protection to well-known trademarks, has become an important part of China's trademark legal work. Well-known trademarks in China (ChinaFam
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page