News Center

Home page

Peak Report

News reports

Enterprise Shortwave

Release time:

2023-07-26

Natural Products Company Organized First Aid Training

On the afternoon of June 13, Tianjin Jianfeng Natural Products Company conducted first aid training for emergency rescue teams.

The main content of this training is cardiopulmonary resuscitation (CPR), which is divided into two parts: video learning and practical operation. The trainees watched the detailed explanation of the cardiopulmonary resuscitation steps and action essentials by the Chinese Red Cross teacher, followed by learning the action essentials, and carried out practical operations on the simulated human. (Sun Xinrui)

Anhui Provincial Health Commission to Jianfeng North Carolina Research

On the morning of July 7, Yang Xubin, member of the Party Group and Deputy Director of Anhui Health Commission, led the heads of relevant departments to Anhui Jianfeng North Carolina Pharmaceutical to carry out research on the development of the pharmaceutical industry and held discussions with relevant heads of Anhui Jianfeng North Carolina. At the

symposium, the research team learned in detail about the development, innovation model and business ideas of Jianfeng Beika Pharmaceutical. Zhang Yiting, deputy general manager of Anhui Jianfeng North Carolina, gave a detailed introduction to the research group on the development process, recent years and future prospects of Jianfeng North Carolina Pharmaceutical, and conducted in-depth discussions and exchanges with the research group on innovative research and development. (Song Danlin)

Huang Ping Jianfeng Electronic Truck Scale Completed Annual Inspection

In order to ensure the accuracy and reliability of the electronic truck scale, maintain the fairness and justice of market transactions, and protect the legitimate interests of consumers, on June 30, relevant verification personnel of Qiandongnan Prefecture Quality Inspection Bureau went to Huang Ping Jianfeng Cement Company to verify and calibrate the electronic truck scale, completing the annual inspection of the electronic truck scale ahead of advance.

In this verification, Huang Ping Peak needs to inspect four electronic truck scales as transactions. The inspectors strictly follow the requirements of the national metrological verification regulations, use standard weight trucks to carry out segmented measurement of the whole vehicle, and calibrate the sensors of each truck scale respectively. The angle difference adjustment and position correction of each point are carried out, and further repeated detection is carried out. Due to the rationality and scientificity of daily maintenance, it is ensured that all the test data are within the error range, and the four electronic truck scales successfully passed the verification at one time. (Pan Chaochun)

Shutdown for Non-stop Inspection

In July, Huang Ping Jianfeng Cement Company used the gap between peak-shifting production to carry out equipment maintenance. During the overhaul, Huang Ping Jianfeng carried out a comprehensive on-site inspection of the entire production system covered from limestone mine to cement factory, and took photos of key parts, tested the machine, replaced new oil, etc.; also communicated with relevant equipment maintenance and construction units, and had a deeper understanding of the equipment operation status, load production, and how to improve the equipment operation rate. Huang Ping Jianfeng will also take this overhaul as an opportunity to strictly implement rectification and reform, while digging deep potential, reducing costs and increasing efficiency, further improving the ability of fine and intelligent production management, and laying a good foundation for the smooth completion of the annual targets and tasks. (Yang Changyuan)

Bearing Do Physical Examination

On July 5, Huang Ping Jianfeng Cement Company invited technicians from bearing manufacturers to carry out a 2-day test on bearings of important production equipment in the factory area. Most of the bearings are provided by the same manufacturer, and this regular inspection is carried out every six months. The technical personnel of the manufacturer use professional instruments to collect data according to various aspects such as dry sound, vibration, abnormal rotation sound, temperature, etc., and then make a sub-folding summary to give a professional data report to classify the normal and existing problems, so as to better grasp the health status of each rotating equipment, so as to suit the remedy to the case and reduce the failure rate of the equipment. (Liu Zhonghua)

Study first, then overhaul

Starting from July 5, Yunnan Jianfeng Cement Company stopped kiln overhaul as planned. In order to better complete the maintenance task, on the morning of the 5th, the security team organized mechanics and electricians to study the maintenance safety control plan and the technical requirements of the maintenance contents, aiming at the difficult projects to implement the maintenance quality control or risk control measures. During the training process, the relevant personnel explained the control points and methods in detail, so that the employees did not work, first understand the actual situation of the maintenance project, and also require the employees to digest and absorb the content, and carry out the operation risk assessment and risk control measures during the on-site maintenance. Implement, and know the maintenance technical plan. The training can ensure the safety, quality and progress of this overhaul. During this period, the relevant person in charge of the safety and environment department was also present to give guidance on how to control the safety of this overhaul. (Lou Xuxin)

Daye Peak Launches Safety Hazard Investigation and Control Action

Recently, Daye Peak Cement Company has comprehensively updated and painted the anti-collision isolation warning stone piers and road teeth one by one in the whole factory area with black and yellow reflective paint, making the anti-collision isolation piers and road teeth look brand new.

Anti-collision Isolation Warning Stone Pier and Road Teeth in Daye Peak Factory Area have seen paint damage and falling off after long-term sun and rain. Exhaust dust generated by passing vehicles is difficult to diffuse and deposit and adhere, causing the paint to fade and age, resulting in a decrease in the overall visual effect and safety prompt effect of black and yellow paint. While it is not beautiful, it also has potential safety hazards and is prone to traffic safety accidents. For this reason, Daye Peak has carried out this campaign to investigate and control potential safety hazards. The updated painted anti-collision isolation warning stone piers and road teeth look more eye-catching, which not only increases the aesthetics of the road, but also makes the factory area safer to pass through, playing a better role in safety protection, strengthening the visual effect and playing a good role in safety reminders to reduce potential traffic safety hazards. (Zhang Jie)

More information

Peak natural products among the top 20 scientific and technological innovation in TEDA

A few days ago, Tianjin Jianfeng Natural products Research and Development Co., Ltd. stood out among nearly 35000 enterprises in Tianjin Development Zone and won the honor of "Top 20 Scientific and technological Innovation Enterprises of 2015. The selection criteria for the top 20 scientific and technological innovation enterprises in Tianjin Economic and Technological Development Zone mainly include: they have won science and technology awards or patent awards in 2015, as well as other awards above the provincial level; they have obtained the qualification certification or approval of research and development institutions above the provincial level; in 2015, the number of invention and utility model patent applications and authorizations was large, totaling more than 15; in 2015, they were supported by national or Tianjin key science and technology plans; scientific research achievements have made significant progress and technology. According to the above standards, Jianfeng Natural Products Company has not only won the second prize of Tianjin Science and Technology Innovation Project Award for the achievements of "Tianjin Plant Waste Reutilization Technology Engineering Center Construction", but also completed the process research of grape seed extract and ginsenoside to pesticide residues, and formulated the international business standard of grape seed extract (grape seed oligomeric proanthocyanidins). In order to better carry out the pilot experiment, large-scale technical transformation was carried out on the second workshop, and the process optimization of extracting anthocyanins from blueberries has been carried out. At the same time, the main business income, operating profit, tax revenue and other economic indicators of peak natural products company in 2015 have increased significantly year-on-year. Relying on the advantages of excellent quality, good efficiency, great contribution, safety and environmental protection, and good social responsibility, Jianfeng Natural Products Company successfully passed the review and became one of the "Top 20 Scientific and Technological Innovation Enterprises in 2015" in Tianjin Development Zone. (

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-30

Peak pharmaceutical "enterprise information construction project" through the acceptance

The "Enterprise Informatization Construction Project" of Jianfeng Pharmaceutical Company was included in the list of key projects of "Integration of Industrialization and Industrialization" (high-level and in-depth combination of informatization and industrialization) in Jinhua City in 2015, and successfully passed the on-site acceptance of the expert group on the morning of May 18. The main contents of the "enterprise information construction project" of the pharmaceutical company include: the tank farm control system, which solves the problem of closed metering and transportation of organic solvents between the tank farm and the production area, can automatically realize the terminal metering setting, and effectively ensure the safety and environmental protection requirements of the tank farm operation; The air conditioning automatic control system realizes the control of the temperature, humidity and room pressure difference in the air conditioning area through the PLC digital-to-analog conversion of the upper computer and lower computer and the terminal actuator regulator, ensure the cleanliness requirements of the production area environment; The online particle monitoring software system automatically adjusts to the standard flow through the upper computer, vacuum system, laser sensor and isodynamic sampling probe, etc. through the flow detector device and key orifice plate inside each sensor, monitors the temperature, humidity, particles, planktonian bacteria, room pressure difference, etc., implements dynamic management, and realizes visual monitoring of the production process environment. MRP production management system, it makes it easier for the warehouse, workshop, and management personnel to obtain information about the flow of materials in the production process, the implementation of production plans, and product inventory. During the on-site acceptance on the 18th, the acceptance team composed of the Information Department of the Municipal Economic and Information Commission, the Economic and Development Bureau of the Development Zone, the Municipal Information Promotion Association and professors of Zhejiang Normal University checked the contracts of each system software, purchase and transfer records, training records, and problem records in project implementation,

2020

07-31

Peak natural products among the top 20 scientific and technological innovation in TEDA

2020

07-31

< 1...58 59 60 61 > 跳转到页