News Center

Home page

Peak Report

News reports

On-site communication and cross-checking The company organizes a "big consultation" on production safety"

Release time:

2022-06-21

News from our newspaper 6# February 14 and 15 , the safety production supervisors of the group company and its subordinate enterprises gathered in Huang Ping Jianfeng Cement Company to exchange the three-year work of safety risk control and on-site management, and went to front-line positions such as Huang Ping Jianfeng production line and mine to find out potential safety hazards, spot check the safety knowledge learning of employees, and conduct on-site scoring. Since the three-year action work of safety risk management and control and on-site governance has been carried out in an all-round way, all subordinate units of the company have promoted safety risk management and on-site governance in an orderly and in-depth manner according to the nature and characteristics of their respective work. At the safety production work exchange meeting held on November 12, 14, 13, , 6, the safety production supervisors of enterprises such as Huang ping peak, daye peak, Yunnan peak, pharmaceutical company production department, Anhui new north card, Anhui peak north card, international trade, peak cable, peak health, etc. successively carried out three-year actions on safety risk control and on-site management, reported and shared their work results, exchanged experiences, and analyzed gains and losses, it also introduces the development of the company's implementation of the safety production responsibility system, the implementation of safety production laws and regulations, and standard procedures, safety risk control and hidden danger investigation and management, emergency management, education and training content, etc., and summarizes experience and lessons, and looks for advanced counterparts. Gaps and deficiencies in enterprises and brother enterprises. At the

meeting, the overall situation of the company-wide industrial accidents in the first half of 2022 was also reported. The two more serious accidents were mainly analyzed, the causes were analyzed, the lessons were summarized in combination with the characteristics of the accidents, and all enterprises were required to strengthen basic management and continuously improve the construction of safety risk management and control system. In his concluding speech at the meeting, Chen Tianci, chairman of the supervisory board of

Group Company, affirmed the achievements made by various units in carrying out on-site governance for three years and risk prevention and control, and praised Huang Ping Jianfeng for his obvious progress in on-site governance. He also put forward six requirements for the company's work safety, namely: all units should timely and conscientiously summarize the work experience of safety risk prevention and control, strengthen the work exchange and experience sharing between enterprises, strengthen mutual learning and reference, and achieve the effect of common progress; All units should learn from the safety accidents in the first half of the year, further improve the risk assessment and control mechanism, and strive to ensure that no safety accidents occur in the second half of the year; further promote the safety risk management and control work, continuously improve the assessment methods and implementation rules according to the requirements of relevant documents of the group company, continuously improve the risk awareness, identification and control level of employees, grasp the results, and truly realize the work requirements of risk management and control management; To achieve the application of

"typical illegal operation behavior 50 " education, and to pay close attention to practical application on the basis of previous training and assessment, so as to not only memorize, it can also avoid and correct illegal operations and eliminate potential safety hazards in actual work. In terms of the promotion of the three-year on-site governance action, all units should keep pace with the times while implementing the plan and striving to complete it ahead of schedule. According to the current technical development level and the needs of the situation, timely adjust or increase the rectification projects; continuously improve the professional quality of safety management personnel and strengthen professional learning, it is required that all enterprise safety supervisors must obtain the qualification of registered safety engineer before the end of 2023

, and the leaders in charge of enterprises are encouraged to obtain the qualification certificate of registered safety engineer. After the

meeting, the inspection team went to Huangping Jianfeng factory and mining area to carry out a large-scale inspection of safety production from workshop to workshop, from post to post and from link to link. The inspection team checked the equipment and facilities such as ammonia tank area, grate cooler, machine repair, warehouse, raw material roller press, etc., the risk control measures and personal protection in the delivery area and maintenance site, and "consultation to check the pulse" to sort out the hidden safety hazards, huang Ping Jianfeng is required to carefully analyze the causes of potential safety hazards, carry out rectification within a time limit, follow up and supervise until the hidden hazards are eliminated, form closed-loop management, and continuously improve the risk prevention and control system, so as to truly make safety accidents "impossible". On 15 , the participants went into workshops and departments in groups to conduct spot checks and inspections on the on-site management and risk control management of Huang Ping's peak work, and scored on the spot. According to the requirements of the company's safety risk prevention and control superior enterprise appraisal, on-site random sampling and random questions were asked. Through the examination of front-line employees' answers and relevant documents, the scores were scored against the

items of the scoring standard. This is also the first corporate cross-check organized by the group company.

Through experience exchange and cross-examination, the safety production supervisors attending the meeting unanimously said that this form of special discussion and cross-examination enables everyone to learn good methods and experiences of brother enterprises, be practical and emphasize practical results, and hope to be organized regularly.

It is understood that starting from 16 , the inspection team also successively went to Yunnan Jianfeng, Daye Jianfeng and other units to carry out safety inspections until the inspection and assessment of the production and business units of the whole group were completed. (Song Shijie)

More information

Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing

On April 7, a Boeing 737-700 aircraft of China Eastern Airlines Yunnan took off from Kunming. After completing two flight test subjects, it landed safely at Lancang Jingmai Airport. This not only marked the basic completion of the airport flight area, The official start of the test flight also marked that the "Peak" brand airport runway cement passed the first "final exam". Lancang Jingmai Airport is a major project with milestone significance in the history of Pu'er transportation construction. Since then, an air corridor connecting southwest Yunnan and Southeast Asia has been added between Kunming and Pu'er, which will greatly promote the development and utilization of tourism resources in Lancang, Menglian and Ximeng "Pu'er Green Triangle" area, and promote the sustainable development of local economy and society; it is of great significance to strengthen the city's national defense construction, maintain border stability, promote national unity, improve emergency rescue capabilities, and promote Pu'er's integration into the country's "Belt and Road" construction. Since the start of the construction of the airport, Yunnan Jianfeng has been paying close attention to it, organizing technical research and repeated tests, and finally produced high-quality airport runway special cement, and with excellent product quality, superior product performance and high-quality service, it has become a runway for Lancang Airport. Cement manufacturer. This not only fills the gap of "peak" airport special cement, but also is of great significance to promote the "peak" brand and improve the market influence of enterprises. It is understood that Jingmai Airport is initially confirmed to be officially opened to traffic at the end of May. (Li Liangping)

2020

07-31

Jianfeng Pharmaceutical Artificial Niuhuang Project Starts

News from this newspaper Jianfeng Pharmaceutical artificial bezoar technical transformation project recently started construction in Qiubin Factory. Artificial bezoar has the effect of clearing away heat and detoxification, resolving phlegm, and is commonly used in Chinese and Western medicines such as colds, clearing away heat and detoxification. As the vast majority of artificial bezoar-related preparations are national essential drugs, with the further implementation of the medical reform policy, the downstream industry of artificial bezoar will enter a new round of business cycle. Jianfeng Pharmaceutical has many years of experience in artificial bezoar production. The technological transformation project will use the existing workshop structure, public works and operators of Qiubin Factory to achieve an annual production capacity of 100 tons of artificial bezoar by adding production equipment such as double cone rotary vacuum drying, horizontal ball mill pulverizer unit, hopper and hoist, closed screening system, and upgrading some public systems. According to the project implementation plan, the project will complete the civil engineering in May. Complete the commissioning, testing and verification of equipment and facilities in July, with trial production conditions; Strive to complete the on-site inspection of GMP certification before the end of December. At present, the factory buildings in Qiubin are vacated and the site is cleaned up. It is understood that the production of natural bezoar is very small, the price is extremely high, and the market rarely provides it. As a biochemical API, artificial bezoar has fewer manufacturers. In the past, due to relatively loose supervision, the testing methods of raw materials and finished products are relatively simple, the quality control indicators are not perfect, and the quality of products on the market is uneven. It is imperative to improve the quality standards. To this end, the State Food and Drug Administration issued the "Biochemical Drug GMP Quality Management Practice (Draft for Comment)" at the end of 2016, which was implemented in March 2017. spike medicine

2020

07-31

Jianfeng Health won many honorary titles such as "Science and Technology Small and Medium-sized Enterprises in Zhejiang Province"

Recently, Jianfeng Health has been awarded a number of plaques and certificates by the Department of Science and Technology of Zhejiang Province, the people's Government of Jinhua City, and the Science and Technology Bureau of Jinhua City. They are "Zhejiang Science and Technology small and medium-sized Enterprises", "Jinhua High-tech Enterprises", "Jinhua Agricultural Science and Technology Enterprises", "Jinhua Agricultural Science and Technology Research and Development Center" and so on. According to the relevant requirements, Zhejiang science and technology-based small and medium-sized enterprises must be small and medium-sized enterprises with independent intellectual property rights, proprietary technology or advanced knowledge, engaged in the research, development, production, sales and service of high-tech and its products, and the proportion of enterprises engaged in scientific and technological research and development personnel accounting for no less than 10% of the total number of employees in that year. Since its establishment, Jianfeng Health has attached great importance to the training of scientific and technological personnel, paid attention to the application of its own intellectual property rights, paid attention to product research and development and the protection of intellectual property rights, promoted the application of intellectual property rights, and encouraged employees to invent and create. By the end of 2016, a total of 8 invention patents and 5 appearance patents had been applied, and 1 invention patent and 5 appearance patents had been obtained. High-tech enterprises in Jinhua City must meet the requirements of the ''High-tech Fields Supported by the State, ''and continue to carry out research and development and technological achievements transformation. Their main products (services) have independent intellectual property rights (authorized, registered or accepted). There are certain requirements for the proportion of R & D personnel, the proportion of R & D funds and the income of high-tech products. The acquisition of high-tech enterprises in Jinhua City has laid the foundation for the further declaration of national high-tech enterprises in the future. In the identification of agricultural science and technology enterprises in Jinhua City, the field of peak health technology belongs to the deep processing technology and equipment of agricultural products, Chinese herbal pieces and plant extracts.

2020

07-31

Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing

2020

07-30

Peak Pharmaceutical was rated as a national intellectual property advantage enterprises

The score ranked first among Jinhua participating enterprises. A few days ago, Peak Pharmaceutical Company was rated as a national intellectual property advantage enterprise. The selection of national intellectual property advantage enterprises is organized by the State Intellectual Property Office. The purpose is to accelerate the formation of a group of Chinese intellectual property leading enterprises with independent intellectual property rights, well-known brands and international competitive advantages, and achieve the development goal of strong intellectual property enterprises. Since Jianfeng Pharmaceutical introduced the GB-T29490-2013 "Enterprise Intellectual Property Management Standard" in 2013, it has been rated as a patent demonstration enterprise in Zhejiang Province in 2013. In 2014, the "Jianfeng" trademark obtained a famous trademark in Zhejiang Province, and the first edition of the "Intellectual Property Manual" was compiled and implemented in 2015. In 2016, it passed the third-party certification of the GB-T29490-2013 "Enterprise Intellectual Property Management Standard". The "Jianfeng" trademark was rated as a well-known trademark by the State Administration of China. In the application and selection of national knowledge by superior enterprises, 52 enterprises in Zhejiang Province won this honor, ranking second in the country in number; Jianfeng Pharmaceutical ranked first among Jinhua participating enterprises. (Zhang Mingyin)

2020

07-31

Group Party Committee to determine the annual work plan

The party Committee of the group company has determined its work ideas and work plan for 2017 a few days ago, and relevant work has been arranged below. In view of the current new political and economic situation and the task of enterprise transformation and development, the general requirements of the Party Committee of the Group Company for 2017 are: to thoroughly study and implement the spirit of the Sixth Plenary Session of the 18th CPC Central Committee and the series of important speeches by General Secretary Xi Jinping, the spirit of the Seventh Party Congress of Jinhua City, to closely revolve around the center of enterprise production, operation and reform and development, and to adhere to scientific development and cross-regional development as the first priority, in order to continue to carry out the study and education of "five stars striving for innovation" and "two learning and one doing", we should highlight the main line of comprehensively and strictly administering the party according to the rules, firmly establish the political consciousness, overall situation consciousness, core consciousness and alignment consciousness of the majority of Party members and cadres, strengthen and improve the party building work in enterprises in the spirit of reform, and strive to improve the scientific, standardized and institutionalized level of Party building work in enterprises, in order to promote the scientific development of the group company, leapfrog development and harmonious development, it provides a strong political, ideological and organizational guarantee. The working idea of the Party Committee of the Group Company in 2017 is to focus on "one center", adhere to "one concept", highlight "three key points" and do a good job in "three constructions". That is: centering on the "one center" of enterprise production, operation and reform and development, we should strive to strengthen the "one concept" of "the organic unity of the party's leadership and the improvement of corporate governance"; to "thoroughly implement the main responsibility of the party committee; continue to carry out the study and education of" two learning and one doing "; and improve the system of party building work" as the "three key points", and focus on "team building and team building

2020

07-31

< 1...47 48 49...61 > 跳转到页