News Center

Home page

Peak Report

News reports

On-site communication and cross-checking The company organizes a "big consultation" on production safety"

Release time:

2022-06-21

News from our newspaper 6# February 14 and 15 , the safety production supervisors of the group company and its subordinate enterprises gathered in Huang Ping Jianfeng Cement Company to exchange the three-year work of safety risk control and on-site management, and went to front-line positions such as Huang Ping Jianfeng production line and mine to find out potential safety hazards, spot check the safety knowledge learning of employees, and conduct on-site scoring. Since the three-year action work of safety risk management and control and on-site governance has been carried out in an all-round way, all subordinate units of the company have promoted safety risk management and on-site governance in an orderly and in-depth manner according to the nature and characteristics of their respective work. At the safety production work exchange meeting held on November 12, 14, 13, , 6, the safety production supervisors of enterprises such as Huang ping peak, daye peak, Yunnan peak, pharmaceutical company production department, Anhui new north card, Anhui peak north card, international trade, peak cable, peak health, etc. successively carried out three-year actions on safety risk control and on-site management, reported and shared their work results, exchanged experiences, and analyzed gains and losses, it also introduces the development of the company's implementation of the safety production responsibility system, the implementation of safety production laws and regulations, and standard procedures, safety risk control and hidden danger investigation and management, emergency management, education and training content, etc., and summarizes experience and lessons, and looks for advanced counterparts. Gaps and deficiencies in enterprises and brother enterprises. At the

meeting, the overall situation of the company-wide industrial accidents in the first half of 2022 was also reported. The two more serious accidents were mainly analyzed, the causes were analyzed, the lessons were summarized in combination with the characteristics of the accidents, and all enterprises were required to strengthen basic management and continuously improve the construction of safety risk management and control system. In his concluding speech at the meeting, Chen Tianci, chairman of the supervisory board of

Group Company, affirmed the achievements made by various units in carrying out on-site governance for three years and risk prevention and control, and praised Huang Ping Jianfeng for his obvious progress in on-site governance. He also put forward six requirements for the company's work safety, namely: all units should timely and conscientiously summarize the work experience of safety risk prevention and control, strengthen the work exchange and experience sharing between enterprises, strengthen mutual learning and reference, and achieve the effect of common progress; All units should learn from the safety accidents in the first half of the year, further improve the risk assessment and control mechanism, and strive to ensure that no safety accidents occur in the second half of the year; further promote the safety risk management and control work, continuously improve the assessment methods and implementation rules according to the requirements of relevant documents of the group company, continuously improve the risk awareness, identification and control level of employees, grasp the results, and truly realize the work requirements of risk management and control management; To achieve the application of

"typical illegal operation behavior 50 " education, and to pay close attention to practical application on the basis of previous training and assessment, so as to not only memorize, it can also avoid and correct illegal operations and eliminate potential safety hazards in actual work. In terms of the promotion of the three-year on-site governance action, all units should keep pace with the times while implementing the plan and striving to complete it ahead of schedule. According to the current technical development level and the needs of the situation, timely adjust or increase the rectification projects; continuously improve the professional quality of safety management personnel and strengthen professional learning, it is required that all enterprise safety supervisors must obtain the qualification of registered safety engineer before the end of 2023

, and the leaders in charge of enterprises are encouraged to obtain the qualification certificate of registered safety engineer. After the

meeting, the inspection team went to Huangping Jianfeng factory and mining area to carry out a large-scale inspection of safety production from workshop to workshop, from post to post and from link to link. The inspection team checked the equipment and facilities such as ammonia tank area, grate cooler, machine repair, warehouse, raw material roller press, etc., the risk control measures and personal protection in the delivery area and maintenance site, and "consultation to check the pulse" to sort out the hidden safety hazards, huang Ping Jianfeng is required to carefully analyze the causes of potential safety hazards, carry out rectification within a time limit, follow up and supervise until the hidden hazards are eliminated, form closed-loop management, and continuously improve the risk prevention and control system, so as to truly make safety accidents "impossible". On 15 , the participants went into workshops and departments in groups to conduct spot checks and inspections on the on-site management and risk control management of Huang Ping's peak work, and scored on the spot. According to the requirements of the company's safety risk prevention and control superior enterprise appraisal, on-site random sampling and random questions were asked. Through the examination of front-line employees' answers and relevant documents, the scores were scored against the

items of the scoring standard. This is also the first corporate cross-check organized by the group company.

Through experience exchange and cross-examination, the safety production supervisors attending the meeting unanimously said that this form of special discussion and cross-examination enables everyone to learn good methods and experiences of brother enterprises, be practical and emphasize practical results, and hope to be organized regularly.

It is understood that starting from 16 , the inspection team also successively went to Yunnan Jianfeng, Daye Jianfeng and other units to carry out safety inspections until the inspection and assessment of the production and business units of the whole group were completed. (Song Shijie)

More information

The Party committee of the company organized and studied the spirit of the Sixth Plenary Session of the 18th CPC Central Committee

The Sixth Plenary Session of the 18th Central Committee of the Communist Party of China was held in Beijing from October 24 to 27. It reviewed and approved the "Several Guidelines on Political Life within the Party under the New Situation" and the "Regulations on Inner-Party Supervision of the Communist Party of China. On November 22, the party committee of the group company successively held party committee and branch secretary meetings to learn the spirit of the sixth Plenary session of the 18th CPC Central Committee and put forward requirements for organizational construction and party member management. At the branch secretary meeting, Jiang Xiaomeng, secretary of the party committee of the group company, preached the main contents of "some guidelines on Inner-Party political Life under the New situation" and "regulations on Inner-Party Supervision of the Communist Party of China. He pointed out that seeking truth from facts, integrating theory with practice, keeping close ties with the masses, criticizing and self-criticism, democratic centralism, and strict party discipline are the basic norms and working principles of inner-party political life accumulated by the Communist Party of China for several generations. In the new social environment, some party members and cadres have bred some unhealthy atmosphere, which has damaged the image and interests of the party, the Sixth Plenary Session of the 18th Central Committee of the Communist Party of China proposed to strengthen and standardize the political life within the party, take the party constitution as the foundation, adhere to the party's political line, ideological line, organizational line and mass line, strive to enhance the political, contemporary, principled and fighting nature of the party's political life, and strive to enhance the party's ability of self purification, self improvement, self innovation and self improvement, Efforts should be made to improve the party's leadership and governance level, efforts should be made to safeguard the authority of the Party Central Committee, ensure the unity and unity of the party, maintain the advanced nature and purity of the party, and strive to form a centralized, democratic and disciplined party in the whole party

2020

07-31

Jinxi plant environmental protection facilities through the completion of acceptance

On November 1, Jianfeng Pharmaceutical Jinxi Pharmaceutical Factory successfully obtained the approval from Zhejiang Environmental Protection Department that the environmental protection facilities of the project passed the completion acceptance, and a key work of Jianfeng Pharmaceutical in 2016 came to an end. Jianfeng Pharmaceutical's annual output of 35 tons of cephalosporins, anti-tumor drugs and other raw material production lines and various preparation production lines technological transformation projects started construction in Jinxi Development Zone in October 2012 and were almost completed in September 2015. The construction of the project strictly abided by the "three simultaneous" system of environmental protection, conscientiously implemented the requirements in the environmental impact assessment report and its approval documents, and invested 19.34 million yuan in environmental protection facilities. The plant has basically realized the separation of clean and sewage. A new wastewater treatment system with a daily treatment capacity of 700 cubic meters and a "physical, chemical and biochemical" treatment process has been built, and an online monitoring device networked with the environmental protection department has been installed. All kinds of production wastewater, public works wastewater and domestic sewage are treated by the wastewater station and sent to Jinxi Sewage Treatment Plant for centralized treatment; there is an RTO regenerative incineration device of 10000 cubic meters per hour and a centralized treatment device of 4000 cubic meters per hour for chlorine-containing organic waste gas. All kinds of waste gas are discharged after collection and treatment. In October 2015, with the approval of Jinhua Economic and Technological Development Zone Branch of Jinhua Environmental Protection Bureau, the trial production of Jinxi project was carried out. After more than half a year of operation, in early July 2016, Zhejiang Environmental Monitoring Center Station carried out completion acceptance monitoring of environmental protection treatment facilities such as waste water and waste gas of Jinxi Pharmaceutical Factory, and issued a completion acceptance monitoring report of environmental protection facilities at the end of August.

2020

07-31

Jinxi plant environmental protection facilities through the completion of acceptance

2020

07-31

Jinxi plant environmental protection facilities through the completion of acceptance

2020

07-30

Daye Jianfeng Safety Standard was awarded as the only award-winning enterprise in daye city in 2015.

Due to the achievements made in the establishment of secondary safety production standardization, daye peak cement company recently received a special award of 200000 yuan from daye municipal government. In order to encourage industrial and commercial enterprises in the region to improve their production safety, daye municipal government set up a special fund in 2015, stipulating that 200000 yuan will be awarded to those who pass the secondary safety standardization review before December 31, 2015. It is understood that among the industrial and commercial enterprises in daye city, there were 4 enterprises that applied for and passed the examination in 2015, but only daye peak passed the examination before December. Therefore, Daye Peak has become the only enterprise that has won the special award for the establishment of the safety standard in Daye City in 2015. (Ye Meifang)

2020

07-31

Two Cement Enterprises Start to Implement "Big Patrol Inspection"

With the change of the competition situation in the industry, the profit space of cement production enterprises has been greatly squeezed. Reducing costs and increasing efficiency and job optimization have become the inevitable choice to improve the enterprise's own development ability and enhance the core competitiveness. In accordance with the requirements of the group company to realize the transformation from extensive management to lean management, combined with the advanced experience of peer enterprises, recently, Yunnan peak, daye peak two enterprises have implemented "big inspection" to promote the overall optimization of posts. On November 1, daye peak post inspection officially started full operation, starting from the limestone storage yard at the source of the production line to the cement storage. the original 15 posts were merged, and the best experienced mechanics, electricians and post workers were transferred to form a large inspection class, which was mainly responsible for on-site emergency disposal and post routine maintenance to ensure the normal production of the whole production line. In order to ensure the smooth implementation of the large-scale inspection, daye peak management team has repeatedly communicated and discussed with the heads of relevant workshops and departments, and held a special workshop post optimization promotion meeting in September to clarify objectives and responsibilities, formulate implementation steps, and do a lot of preparatory work. At the kick-off meeting for the implementation of the large-scale inspection on October 31, Zhang Fengliang asked daye peak employees to recognize the current situation of serious cement overcapacity and cruel market competition, understand the necessity of implementing the large-scale inspection, and asked the workshop leaders to do a good job in training and guiding the employees, shorten the transition period, normalize the operation of the large-scale inspection as soon as possible, and at the same time, managers should also change their working ideas and concepts and do a good job in full-time, strengthen the inspection, overhaul and maintenance of the regular day shift, and find and solve the problems existing in the equipment and process in time.

2020

07-30

< 1...53 54 55...61 > 跳转到页